Indonesia Defence Forum

[Silahtar]

https://www.aa.com.tr/id/pg/Galeri Foto/kerjasama-indonesia-turki-dalam-pengembangan-pesawat-tanpa-awak-/214

 

[trishna_amṛta]

View attachment 505066

The airframe design is a reminder of the good old P-38 Lightning

 

[pr1v4t33r]

Turangga 4x4 for Paskhas

 

[Nike]

Turangga 4x4 for Paskhas

Mantap using RWS

 

[asterisktaker]

Really wish they would develop the 5 doors version of Turangga, such a handsome beast

 

[striver44]

Turangga 4x4 for Paskhas

Rws merk apa?

 

[mandala]

Rws merk apa?

Looks like its the Turkish Aselsan SARP RCWS.

The Aselsan SARP RCWS on the Turkish HIZIR 4x4 Tactical Wheeled Armoured Vehicle:

https://www.armyrecognition.com/tur..._4x4_wheeled_armored_vehicle_photo_video.html

 

[mandala]

Interesting to see a model of a 8x8 APC beside the two Pindad Medium Tank models. Looks like a new type 8x8 APC. Noticed also the Medium Tank model at the front has different front hull design than the Medium Tank model in the background. The hull design of the Medium Tank model in the background is the same as the Pindad Medium Tank Prototype.

View this content on Instagram

View this content on Instagram

 

[Var Dracon]

Interesting to see a model of a 8x8 APC beside the two Pindad Medium Tank models. Looks like a new type 8x8 APC. Noticed also the Medium Tank model at the front has different front hull design than the Medium Tank model in the background. The hull design of the Medium Tank model in the background is the same as the Pindad Medium Tank Prototype.

View this content on Instagram

View this content on Instagram

There is no difference in the hull for me, it's just viewed from different angle. But still the same hull as the prototype.

 

[mandala]

There is no difference in the hull for me, it's just viewed from different angle. But still the same hull as the prototype.

Its different. The difference is in the front section of the front hull. You can see from the pic below the position of the triangular steel bar for hooking (red circle) is positioned rather in the middle of the front hull. There is more slope in design from the triangular steel bar to the position of the headlamp (blue line) section compared to the Medium Tank model in the background. Iirc...there was news after the successful mobility & live firing tests the CEO of PT Pindad said that there will be some minor changes in the design.

 

[Nike]

 

[Mahakam]

the one on the front has armor skirting that's all

 

[mandala]

the one on the front has armor skirting

The armor side skirt is obviously the different with one is without the armor side skirt. But if you look closely at the front end of the front hull of both of the Medium Tank models you will see the difference. There is a slope angle between the triangular steel bar and the front end of the front hull section (red line).

 

[deadlast]

The armor side skirt is obviously the different with one is without the armor side skirt. But if you look closely at the front end of the front hull of both of the Medium Tank models you will see the difference. There is a slope angle between the triangular steel bar and the front end of the front hull section (red line).



View attachment 505515

View attachment 505531



View attachment 505516

View attachment 505533

I think it's more of inaccurate modeling than an actual design.
The placements of front lifting eyes on the first photo made no sense. That location should be where the spaced armor present, that means it has no direct contact with the hull. The lifting eye needs to be welded directly to the hull to be able to effectively spread and bear the load (weight) of the hull when it need to be lifted off the ground. CMIIW.

 

[mandala]

I think it's more of inaccurate modeling than an actual design.
The placements of front lifting eyes on the first photo made no sense. That location should be where the spaced armor present, that means it has no direct contact with the hull. The lifting eye needs to be welded directly to the hull to be able to effectively spread and bear the load (weight) of the hull when it need to be lifted off the ground. CMIIW.

I was wondering what is the name of those triangular steel bar in english...now i know "lifting eyes". Tq.

Yes i was thinking the same thing. That is why i said by looking at the placemet of the lifting eyes there are two different Medium Tank models. The placement of the front lifting eyes should be like the Medium Tank in the background. The more accurate one is the model in the background. Btw i'm guessing that these models are made by 3D Printing right?

8x8 APC.

View this content on Instagram

View this content on Instagram