The Eagle
SENIOR MODERATOR
- Joined
- Oct 15, 2015
- Messages
- 24,239
- Reaction score
- 258
- Country
- Location
During an interview with Rana Mubashir-Aaj News, Mr. Temel Kotil, President & CEO TAI said that TF-X is now a “Turkish-Pakistani fighter”. Dr. Rizwan Riaz (AVM) Pro Dir RIC & VP NSTP adds that it is a 5th Gen Fighter Aircraft in which Pakistan & Turkiye are now collaborating. The link to TV program is as follows along with a documentary picture being shared on the Forum.
In above TV Program, the concerns have talked about the level of collaboration from the ground level to exchange program. However, details are not being shared in depth but it helps to have a bit of idea about cooperation between both countries.
A little background about Pakistan Turkiye possible collaboration in TFX
Back in 2017, ACM Sohail Aman said:
"We are integrating our technology with friendly countries, including Turkey. We are thinking of producing the next-generation aircraft by pooling resources with them. For this, the basic framework and agreements have been made.
The baseline is that we have to develop high-end technology ourselves. Of course, the American and Western technologies are better, but if it is unavailable, then we have to make the best use of our own capabilities and our friends."
"I consider it a breach of promise on their part because the United States promised to co-fund this operation (as part of its foreign military assistance). They didn’t adhere to this promise, which is very sad. As a responsible nation, you don’t do this. American funding for F-16s would have been a win-win situation for both.
While that happened, we kept looking at other options. I think we have some of the leading options both in China and Russia. We are also collaborating with Turkey for developing a next generation aircraft."
web.archive.org
Then after in 2019, during an interview with Alan Warnes, PAC Kamra Chairman, AM Ahmer Shahzad says as follows.
In view of above statements/interviews, it appears that Pakistan - Turkiye collaboration was discussed before as well and what CEO TAI recently revealed is not totally a new development.
Project AZM
The following details is hereby quoted and copied from Wikipedia as a refresher and for the ease of readers.
From the original source TF - TUSAS
In order to meet Turkish Air Force (TurAF) requirements beyond 2030s, an indigenous design and development program aims to replace the aging F-16 fleet of TurAF.
Within the scope of TF-X Program, Turkey will become one of the few countries to possess the necessary technologies, engineering infrastructure and production capabilities. Once the engineering activities on all the critical technologies are accomplished (e.g. increased situational awareness, sensor fusion, low observability, weapon bay, …etc), which are needed by a 5th generation (or beyond) jet fighter aircraft.
TF-X aircraft is planned to be kept operational in the TurAF inventory until 2070s and will be interoperable with other critical assets of TurAF such as F-35As.
The TF-X indigenous design and development program prime contract between Undersecretariat for Defence Industries (SSM) of Ministry of Turkish National Defence and Turkish Aerospace has been signed on 5th of August 2016.
The timing of this signature alone, is a key demonstrator of Turkey’s determination of running mega-projects uninterruptedly, even under extra-ordinary conditions.
Currently, the prime contract covers the initial four (4) years (starting after signature of major subcontracts) which will end up with completion of preliminary design phase. Within this period beyond the design and development of TF-X Aircraft, engineering capabilities, technology development activities (for key sensors like radar, electronic warfare..etc.), test infrastructures establishment and certification processes will be performed and extensive capabilities for a new generation jet fighter design, development and production will be gained by Turkish industry.
TF-X aircraft will be a multi-role aircraft, it will be designed mainly for air-to-air role with a consideration to air-to-surface roles as well. Upon engineering analysis, TF-X aircraft will be a multi-role aircraft, it will be designed mainly for air-to-air role with a consideration to air-to-surface roles as well. Upon engineering analysis, preliminary calculations, based on received information of suppliers of candidate engines, TF-X aircraft is decided to be a twin engine configuration.
Turkish Fighter-TF, the 5+ Generation Multirole Fighter Aircraft, provides significant capabilities in both Air to Surface and Air to Air combat requirements. Turkish Aerospace’s survivable, strong and agile platform Turkish Fighter is a fully aware warrior, with intelligent and strong combat capabilities.
Turkish Fighter provides air dominance through:
- Increased air to air engagement ranges with Novel Weapons
- Precise and accurate weapon firing from internal weapon bays at high/supersonic speed
- Augmented lethality with support of Artificial Intelligence and Neural Networks.
Other information including Features & Technical data can be found on official website by visiting the given link as above.
Article in Combat Aircraft on TF-X from January
Turkey's most popular defense industry and military aviation news platform disclses as follows.
The first prototype of National Combat Aircraft (MMU) will reach the assembly phase by the end of this year.
On June 30, 2021, Turkish Air Force made an official presentation about the TF-X program to the press. In the presentation, it was stated that Phase-1 Stage-1 had started with preliminary design works, right after T0 stage. As part of preliminary design activities, system requirements review (SRR) is currently being carried out. By the end of 2022, system functionality review (SFR) and system requirements review (SRR) will be completed. Thus, the preliminary design activities will come to an end. The program is expected to go to the next stage by 2023 when the initial roll-out occurs with engines capable of taxiing.[1]
Phase-1 Stage-2 involves detailed design and qualifications carried out in the 2022-2029 period. The aircraft will roll out in 2023, critical design review (CDR) activities will be carried out in 2024, the production of the first aircraft, called Block-0, will be completed in 2025 and the first flight will be accomplished in 2026. Until that date, TAI aims to manufacture 3 prototypes.[1] The Block-1 configuration is planned to be developed until 2029. Manufacture of 10 Block-1 fighter jets are planned within the scope of Phase-2, and aircraft will be delivered to the Turkish Air Force between 2030 and 2033.[1] In Phase-3, between 2034 and 2040, development and mass production activities of other TF-X blocks is planned.[1]
Mockup, rear view
TAI's Advanced Carbon Composites fuselage facility, which was commissioned to produce fuselages for Lockheed Martin's Joint Strike Fighter (F-35) program,[40][41] has been tasked with developing an Advanced Carbon Composite fuselage for the TF-X. The Turkish Undersecretariat for Defense Industries (SSM) has also issued a tender for the development of a new lighter carbon composite thermoplastic for the TF-X fuselage.[42]
General characteristics
It is pertinent to mention here that Project AZM is an umbrella entity by Pakistan to fulfill future defence needs with self reliance & indigenous programs. Without going into details about Project AZM, since the same is already explained and discussed in a dedicated thread, we shall continue here on topic of Pakistan Turkiye JV for NGFA by collaborating in TFX program.
In above TV Program, the concerns have talked about the level of collaboration from the ground level to exchange program. However, details are not being shared in depth but it helps to have a bit of idea about cooperation between both countries.
A little background about Pakistan Turkiye possible collaboration in TFX
Back in 2017, ACM Sohail Aman said:
"We are integrating our technology with friendly countries, including Turkey. We are thinking of producing the next-generation aircraft by pooling resources with them. For this, the basic framework and agreements have been made.
The baseline is that we have to develop high-end technology ourselves. Of course, the American and Western technologies are better, but if it is unavailable, then we have to make the best use of our own capabilities and our friends."
"I consider it a breach of promise on their part because the United States promised to co-fund this operation (as part of its foreign military assistance). They didn’t adhere to this promise, which is very sad. As a responsible nation, you don’t do this. American funding for F-16s would have been a win-win situation for both.
While that happened, we kept looking at other options. I think we have some of the leading options both in China and Russia. We are also collaborating with Turkey for developing a next generation aircraft."
Two fronts – one mission | Bol Narratives
Then after in 2019, during an interview with Alan Warnes, PAC Kamra Chairman, AM Ahmer Shahzad says as follows.
In view of above statements/interviews, it appears that Pakistan - Turkiye collaboration was discussed before as well and what CEO TAI recently revealed is not totally a new development.
Project AZM
- The Pakistan Air Force (PAF) has formally announced it will commence development of a 5th-generation fighter, medium altitude long-endurance (MALE) unmanned aerial vehicle (UAV) and munitions under the banner of “Project Azm” (i.e. resolve or determination).
- AvDI’s long-term endeavour is clearly the 5th-generation fighter program (FGF). In the past several years, several factors emerged which analysts thought would shape the PAF’s next-generation fighter pursuits, most notably the rise of the AVIC FC-31 Gyrfalcon. While the Shenyang Aircraft Corporation (SAC) is clearly progressing in developing the fighter, it is unclear if the PAF will pursue it. If not the FC-31, then realistically only two other alternate courses remain: the TAI TFX and an original design.
- Pakistan has been billed as a prospective partner in the TFX, Turkey’s next-generation fighter effort. On repeated occasions since 2016, Turkish government and industry and Pakistan MoDP officials confirmed the link. However, the Pakistan MoDP’s statements regarding the matter had only verified Ankara’s invitation, but it was unclear if the approach was commercially oriented (akin to PAC’s work in supplying Anka parts) or in relation to possible PAF procurement.
- The PAF itself did not comment on TFX, but aviation journalist Alan Warnes (who is directly in touch with the PAF) reported in May that the TFX is “likely to figure in the PAF’s new generation fighter requirement.”
The following details is hereby quoted and copied from Wikipedia as a refresher and for the ease of readers.
From the original source TF - TUSAS
In order to meet Turkish Air Force (TurAF) requirements beyond 2030s, an indigenous design and development program aims to replace the aging F-16 fleet of TurAF.
Within the scope of TF-X Program, Turkey will become one of the few countries to possess the necessary technologies, engineering infrastructure and production capabilities. Once the engineering activities on all the critical technologies are accomplished (e.g. increased situational awareness, sensor fusion, low observability, weapon bay, …etc), which are needed by a 5th generation (or beyond) jet fighter aircraft.
TF-X aircraft is planned to be kept operational in the TurAF inventory until 2070s and will be interoperable with other critical assets of TurAF such as F-35As.
The TF-X indigenous design and development program prime contract between Undersecretariat for Defence Industries (SSM) of Ministry of Turkish National Defence and Turkish Aerospace has been signed on 5th of August 2016.
The timing of this signature alone, is a key demonstrator of Turkey’s determination of running mega-projects uninterruptedly, even under extra-ordinary conditions.
Currently, the prime contract covers the initial four (4) years (starting after signature of major subcontracts) which will end up with completion of preliminary design phase. Within this period beyond the design and development of TF-X Aircraft, engineering capabilities, technology development activities (for key sensors like radar, electronic warfare..etc.), test infrastructures establishment and certification processes will be performed and extensive capabilities for a new generation jet fighter design, development and production will be gained by Turkish industry.
TF-X aircraft will be a multi-role aircraft, it will be designed mainly for air-to-air role with a consideration to air-to-surface roles as well. Upon engineering analysis, TF-X aircraft will be a multi-role aircraft, it will be designed mainly for air-to-air role with a consideration to air-to-surface roles as well. Upon engineering analysis, preliminary calculations, based on received information of suppliers of candidate engines, TF-X aircraft is decided to be a twin engine configuration.
Turkish Fighter-TF, the 5+ Generation Multirole Fighter Aircraft, provides significant capabilities in both Air to Surface and Air to Air combat requirements. Turkish Aerospace’s survivable, strong and agile platform Turkish Fighter is a fully aware warrior, with intelligent and strong combat capabilities.
Turkish Fighter provides air dominance through:
- Increased air to air engagement ranges with Novel Weapons
- Precise and accurate weapon firing from internal weapon bays at high/supersonic speed
- Augmented lethality with support of Artificial Intelligence and Neural Networks.
Other information including Features & Technical data can be found on official website by visiting the given link as above.
Article in Combat Aircraft on TF-X from January
Turkey's most popular defense industry and military aviation news platform disclses as follows.
The first prototype of National Combat Aircraft (MMU) will reach the assembly phase by the end of this year.
Development Schedule Overview (Wikipedia)
Development Phase-1 was expected to officially commence by the end of 2014,[37] however, initial conditions were met and the project has officially started in late 2018.On June 30, 2021, Turkish Air Force made an official presentation about the TF-X program to the press. In the presentation, it was stated that Phase-1 Stage-1 had started with preliminary design works, right after T0 stage. As part of preliminary design activities, system requirements review (SRR) is currently being carried out. By the end of 2022, system functionality review (SFR) and system requirements review (SRR) will be completed. Thus, the preliminary design activities will come to an end. The program is expected to go to the next stage by 2023 when the initial roll-out occurs with engines capable of taxiing.[1]
Phase-1 Stage-2 involves detailed design and qualifications carried out in the 2022-2029 period. The aircraft will roll out in 2023, critical design review (CDR) activities will be carried out in 2024, the production of the first aircraft, called Block-0, will be completed in 2025 and the first flight will be accomplished in 2026. Until that date, TAI aims to manufacture 3 prototypes.[1] The Block-1 configuration is planned to be developed until 2029. Manufacture of 10 Block-1 fighter jets are planned within the scope of Phase-2, and aircraft will be delivered to the Turkish Air Force between 2030 and 2033.[1] In Phase-3, between 2034 and 2040, development and mass production activities of other TF-X blocks is planned.[1]
Design
TF-X is the first 5th-generation aircraft involving digital twin technology for the design and production.[38][39]Requirements
In June 2021, Turkish Air Force, in a presentation made to the press, announced its requirements for minimum capabilities of the TF-X.[1]- Improved aerodynamics and propulsion
- Super-cruise
- Sufficient and optimized combat radius
- Advanced and internal multi-spectral sensors (EW and RF/IR)
- Low observability
- Sensor fusion and autonomy
- Improved data-link capabilities for network enabled warfare
- High precision stand-off weapons
Airframe
Hüseyin Yağcı, TAI's chief engineer on the TF-X program, has stated that all three conceptual designs thus far feature a design optimized for low radar cross-sectional density, internal weapons bays, and the ability to supercruise, features associated with fifth-generation fighter jets.[5]
Mockup, rear view
TAI's Advanced Carbon Composites fuselage facility, which was commissioned to produce fuselages for Lockheed Martin's Joint Strike Fighter (F-35) program,[40][41] has been tasked with developing an Advanced Carbon Composite fuselage for the TF-X. The Turkish Undersecretariat for Defense Industries (SSM) has also issued a tender for the development of a new lighter carbon composite thermoplastic for the TF-X fuselage.[42]
Radar and sensors
ASELSAN is currently developing an advanced active electronically scanned array radar which will use gallium nitride (GaN) technology for the TF-X program.[43]Avionics and equipment
The TF-X will be integrated from the cockpit to accompanying UAVs (most likely the TAI Anka) through encrypted datalink connections.[44] The aircraft will likely use upgraded variants of Aselsan's own radar warning receiver (RWR), missile warning system (MWS), laser warning system (LWS), chaff and flare management, dispensing system and digital radio frequency memory (DRFM)-based jamming system, which already deployed with the other air platforms.[45][46]Propulsion
Prototypes will be equipped with General Electric F110 engines until national ones are developed by TRMotor.[47][48] There are ongoing negotiations with Rolls-Royce on development of an engine for the TF-X.[49]Preliminary specifications
Data from Turkish Aerospace[50]General characteristics
- Crew: One pilot
- Length: 21 m (68 ft 11 in)
- Wingspan: 14 m (45 ft 11 in)
- Height: 6 m (19 ft 8 in)
- Wing area: 60 m2 (670 sq ft)
- Max takeoff weight: 27,215 kg (60,000 lb)
- Powerplant: 2 × General Electric F110 for test flights (national engines to be developed by TRMotor) , 120 kN (27,000 lbf) thrust each
- Maximum speed: 2,222 km/h (1,381 mph, 1,200 kn)
- Maximum speed: Mach 1.8[3]
- Combat range: 1,100 km (690 mi, 600 nmi)
- Service ceiling: 17,000 m (55,000[3] ft)
- g limits: +9.0 g & -3.5 g
- Missiles:
- Air-to-air missiles:
- GÖKTUĞ missile program:
- Gökdoğan (Peregrine) BVR active radar homing
- Gökhan BVR active radar homing
- Akdoğan (Peregrine) BVR active radar homing
- Bozdoğan (Merlin) short-range infrared homing
- MBDA Meteor (BVRAAM)
- GÖKTUĞ missile program:
- Air-to-surface missiles:
- SOM Cruise Missile (B1, B2, and J variants)
- KUZGUN-TJ, Turbojet-powered Air-to-surface missile
- KUZGUN-KY, Solid fuel Rocket-powered Air-to-surface missile
- AKBABA, Air-to-surface, Anti-radiation Missile (ARM)
- MBDA SPEAR-3
- Air-to-air missiles:
- Bombs:
- Teber-81 (Mark 81 bomb w/ ROKETSAN Laser Guidance Kit)
- HGK-82 (Mark 82 bomb w/ TUBITAK-SAGE Precision Guidance Kit)
- KGK-82 (Mark 82 bomb w/ TUBITAK-SAGE Wing Assisted Guidance Kit)
- Teber-82 (Mark 82 bomb w/ ROKETSAN Laser Guidance Kit)[51]
- HGK-83 (Mark 83 bomb w/ TUBITAK-SAGE Precision Guidance Kit
- KGK-83 (Mark 83 bomb w/ TUBITAK-SAGE Wing Assisted Guidance Kit)[52]
- HGK-84 (Mark 84 bomb w/ TUBITAK-SAGE Precision Guidance Kit)
- LHGK-84 (Mark 84 bomb w/ TUBITAK-SAGE Laser Sensitive Guidance Kit
- SARB-83, Bunker buster
- NEB-84, Bunker buster
- MAM (Smart Micro Munition) (MAM-T variant)
- KUZGUN-SS, Glide bomb
- ASELSAN Miniature Bomb
- IRFS (AESA Radar, Electronic Warfare (EW))
- Advanced Navigation Features (ICNI)
- Integrated Electro-Optical Systems (IEOS) (Infrared Search and Track (IRST), Electro-Optical Targeting System (EOTS) etc.)
- Advanced Cockpit / Human Machine Interface
It is pertinent to mention here that Project AZM is an umbrella entity by Pakistan to fulfill future defence needs with self reliance & indigenous programs. Without going into details about Project AZM, since the same is already explained and discussed in a dedicated thread, we shall continue here on topic of Pakistan Turkiye JV for NGFA by collaborating in TFX program.
