Military Aviation Modelling : JF-17

[Argus Panoptes]

BTW, I have got swollen fingers now after using scissors the whole day.

What do you folks use to cut the pieces and fine tune the joints?

I have a file for smoothing the surface, but a scissor does a good job as well.



I have got a second model of a helicopter.

Never rush making a model. Take it slow, working for short periods of time. You will enjoy it more, and the end result will be much better.

 

[Manticore]

BTW, I have got swollen fingers now after using scissors the whole day.

What do you folks use to cut the pieces and fine tune the joints?

I have a file for smoothing the surface, but a scissor does a good job as well.



I have got a second model of a helicopter.

I used to use my dissection kit however it takes atleast a week making a model

 

[Jango]

I used to use my dissection kit however it takes atleast a week making a model

Do you think using a hot knife or something will help the fine tunings better?

BTW, I made mine in one day!

And to be honest,the result is pretty good...the DSI got just a bit misplaced, and then the cockpit. Other than that, it's excellent.

BTW, did you work on the Trumpeter model? Because on the trumpeter, there is no slot for the centreline tank...so I fixed it with glue.

 

[Manticore]

Do you think using a hot knife or something will help the fine tunings better?

Use a scalpel from a dissection kit

 

[Jango]

Use a scalpel from a dissection kit

Would it cut the mould joints cleanly.?

I had to file off quite a few...

What does your tool kit consist of?

 

[Manticore]

Would it cut the mould joints cleanly.?

I had to file off quite a few...

What does your tool kit consist of?

bhai just buy the basic biology dissectiom kit.. you wouldnt need the plastic surgery kit for modelling

 

[Jango]

bhai just buy the basic biology dissectiom kit.. you wouldnt need the plastic surgery kit for modelling

What does a bio kit have?

I have a multi tool, with a small and big file, pliers, scissors and that is basically it.

And how do you paint?

 

[Argus Panoptes]

Use a scalpel from a dissection kit

Scalpels can work, but the proper tool is the X-Acto knife:

Z-Series Blade - #1 Precision Knife | X-ACTO

 

[nadeem1]

are these detailed models r available in pakistan?
if not,how can i get these n other models in pakistan?immediate help required

 

[nadeem1]

how can i get this f16 model in pakistan?

 

[Manticore]

 

[Manticore]

1/72 Trumpeter JF-17 by Ariel Patish

 

[GHOST RIDER]

Scale modelling in Pakistan,
I have trouble finding proper spray paints,
any body else have the same problem ?

 

[Imran Khan]

i need few models damn from where i can got ?

 

[Jf Thunder]

i need the models too man