What's new

Fake Chinese spares for indigenised Bofors guns

.
Known fact world wide

China great at copying.

Rubbish quality

India better stick to higher quality western parts be it USA Israel and France .

Cheap Chinease no thank you
 
.
Made in India
oDDS7qVPkKIx27C=rVp=ZQe0byQYWORJYgG3S40FNDIT91500512252478.jpg

176629518.jpg

sh3602.jpg

23848058.jpg

224103VR_0.jpg

300000908235128503326398533_950.jpg

t01a2b16907b02af705.jpg

14645888.jpg


That's why the Mumbai and Delhi subways need to be imported from china. That's why India and China have huge trade deficits.
 
. .
Porcelain and silk.

something india wants but cannot master it :victory:

Even if there is india made porcelain no one would buy it



In fact in 2013, china made qoros car scored 5 stars in crash test

maxresdefault.jpg

The only thing which the Chinese have mastered is producing ultra low quality crap.
 
.
That is why CBI initiated the enquiry :lol:
But even more embarrassing is that...... No matter what time, the India army will not choose "made in India".;)

You should be grateful for the support of the world's third largest arms exporter to the India army.:lol:
 
.
But even more embarrassing is that...... No matter what time, the India army will not choose "made in India".;)

You should be grateful for the support of the world's third largest arms exporter to the India army.:lol:

ATAGS is successful and our Army is so impressed about it .

Third largest junk exporter should always appreciated and that is why we are going for CBI enquiry
 
.
The only thing which the Chinese have mastered is producing ultra low quality crap.

Quite sure in chinese military there r no made in india stuff.

Quite sure that if indian handphones that r chinese made were to be hacked by chinese, no indian troops would have communication
 
.
Fake Chinese 'Made-in-Germany' parts find way into Indian artillery gun, CBI files FIR
  • Save for later
  • Reading List
  • Print
  • Comment
dhanush%20gun-20170722054620-1170x645.JPG

The Dhanush artillery gun makes its debut at the Republic Day Parade in New Delhi in January 2017. Photograph: (Zee News Network)

The CBI has filed an FIR after fake Chinese-made "Made-in-Germany" spare

way into an Indian-made artillery gun.

The FIR was filed against Sidh Sales Syndicate -- the company that supplied the parts -- and unidentified officials of the Guns Carriage Factory in Jabalpur.

The CBI alleges the supplier entered into a criminal conspiracy with the GCF officials.

The gun in question is the Dhanush, the Indian version of the Bofors artillery gun which performed exceedingly well in the 1999 Kargil conflict.

The part is something called a "wire race roller bearing".

"In furtherance of the said criminal conspiracy, unknown officials of GCF accepted the Chinese manufactured 'Wire Race Roller Bearings' supplied by Sidh Sales Syndicate which were embossed as 'CRB-Made in Germany'," PTI reported the CBI as saying in its FIR.

The CBI added production and performance of the Dhanush gun is extremely crucial for India's defence preparedness and that the "wire race roller bearing" is a vital component.
 
. .
One word: corruption
This is bad for India.. why blame Chinese companies making these parts with specs from the Indian importers.. even the Made in Germany tag might have been ordered..it is part of the specs..
 
Last edited:
.
Fake Chinese parts in India-made Bofors gun: CBI books Delhi firm
SAM Staff, July 23, 2017
bofors-gun.jpg

Sidh Sales Syndicate supplied wire race roller bearings for the manufacture of the Dhanush guns, the Indian version of Bofors Howitzer guns that performed exceedingly well during the Kargil conflict in 1999.(AFP FILE PHOTO)
CBI booked a Delhi-based firm and unidentified officials of the Gun Carriage Factory in Madhya Pradesh on Friday for selling fake Chinese spare parts to Jabalpur’s ordnance factory, which falls under the Ministry of defence’s department of defence production.

CBI registered an FIR under criminal conspiracy, cheating and forgery against unknown officials of GCF, accusing them of entering into a conspiracy with Delhi-based Sidh Sales Syndicate.

The firm, based out of Fawri Commercial complex in Delhi’s GB Road, was selected by the GCF for the supply of four wire race roller bearings required for the manufacture of the Dhanush guns, the Indian version of Bofors Howitzer guns that performed exceedingly well during the Kargil conflict in 1999.

The bearings would have cost Indian government approximately 35 lakh rupees, but GCF officials raised the total demand of the bearings from four to six and amended the value of the supply order to more than Rs 53 lakh.

Sidh Sales supplied two bearings each on three different dates in April, May and August 2014 after submitting documents to GCF that the bearings were made by CRB Antriebstechnik, a Germany based company which manufactures mechanical parts, including bearings.

According to CBI, the bearings provided to GCF had Made in Germany embossed in them, and even though tests conducted on the same proved them to be inept, the same were accepted after assurances made by Sidh Sales that they will provide free service if the bearings don’t perform well.

It was later found out that that the German company mentioned by Sidh Sales does not manufacture the said bearing. Worse, the bearings were found to be bought from Sino United Industries based in China’s Henan region.

The Delhi firm was found to be corresponding with two other Chinese firms named Xuzhou Helin Slewing Bearings Co Ltd and RTR Engineering Co Limited and it was found that the certification letters claimed by Sidh Sales to have been sent by CRB Antriebstechnik were fake.

The agency will not name any officials and will soon be examining directors of the private firm.

SOURCE PTI/ HINDUSTAN TIMES

http://southasianmonitor.com/2017/0...s-india-made-bofors-gun-cbi-books-delhi-firm/
 
.
Known fact world wide

China great at copying.

Rubbish quality

India better stick to higher quality western parts be it USA Israel and France .

Cheap Chinease no thank you
Unfortunately, the India army did not choose "made in India". This explains everything.

But you should really thank the world's TOP 3 arms exporters for their support of India.

Saudis Use Chinese-made Cannons in Yemen
saudi_plz_45_1.jpg


That's why I look down upon Indians - like lying, lacking basic common sense, ignorance and arrogance.

@srnair @Dotachin @navtrek @turbofan7a @ashok321
 
Last edited:
.
Fake Chinese spares for indigenised Bofors guns: CBI FIR
By PTI | Published: 21st July 2017 07:25 PM |

Last Updated: 21st July 2017 07:25 PM


NEW DELHI: China-made parts camouflaged as 'Made in Germany' found their way to the production line of indigenised Bofors guns used by the army, prompting the CBI to file a case against a Delhi-based company.

Besides Sidh Sales Syndicate, the CBI also registered a case against unidentified officials of the Guns Carriage Factory (GCF), Jabalpur, under criminal conspiracy, cheating and forgery for supplying fake and cheap China-made spares passing off as Made in Germany for Dhanush guns, the FIR alleged.


Dhanush is the indigenised version of the Bofors artillery guns which performed exceedingly well during the Kargil conflict in 1999.

The CBI alleged that the supplier entered into criminal conspiracy with the unidentified GCF officials to supply duplicate spare parts (bearings) used in the manufacture of Dhanush guns.

"In furtherance of the said criminal conspiracy, unknown officials of GCF accepted the Chinese manufactured 'Wire Race Roller Bearings' supplied by Sidh Sales Syndicate which were embossed as 'CRB-Made in Germany'," the CBI said in the FIR.

The agency said production and performance of the Dhanush gun is extremely crucial for India's defence preparedness and "wire race roller bearing" is its vital component.

A tender was floated for the procurement of four such bearings according to the Rothe Erde drawing for 155 mm gun in which four firms had participated. The order was given to Sidh Sales Syndicate at the value of Rs 35.38 lakh in 2013, the FIR stated.

The order was further increased to six bearings at the cost of Rs 53.07 lakh on August 27, 2014.

The company supplied two bearings each on three occasions between April 7, 2014 and August 12, 2014.

The company submitted 'certificates in origin' showing the bearings were procured from CRB Antriebstechnik, Germany.

They were also embossed with the label, CRB-Made in Germany.

GCF tests showed that the bearings were unacceptable due to deviations in dimensions.

The company provided clarifications and assured that in case of non performance of the bearing due to manufacturing defects, they would replace the bearing free of cost and take corrective action for future supply.

"Consequently the bearings were accepted as a special case by unknown officials of GCF Jabalpur," the CBI alleged.

Information received by the CBI shows that the German company does not manufacture these parts.

It showed that Sidh Sales Syndicate got the six bearings manufactured by Sino United Industries (Luyang) Ltd Henan, China.

The agency also seized several emails which were exchanged between China and Sidh Sales Syndicate. The letter from Germany shown by the company was also on forged letterhead, CBI alleged.

The certificate of origin from Germany was also forged.

"The said forged letter and certificate were accepted by unidentified officials of GCF with ulterior motive and by abusing their official positions as such without ascertaining the genuineness of the said letter and certiciates and cause undue advantage to Sidh Sales Syndicate and corresponding loss to the Government of India," the investigating agency said in the FIR.

If it's 'indigenised', then why does it require imported parts?
 
.
all Chinese fault since 1962.:rofl:

I guess Chinese is making the huge biggest "fault" in Doklam now.Indians will realize it soon and remember it forever.
 
.

Latest posts

Country Latest Posts

Back
Top Bottom