Made in Pakistan
- Thread starter Hyde
- Start date
Ababeel
FULL MEMBER
- Joined
- Sep 20, 2006
- Messages
- 1,050
- Reaction score
- -1
- Country
- Location
Pioneer Cables Ltd., Pakistan
The first Company in Pakistan to manufacture HT Cables upto 15KV. Pioneer Cables manufacture Wires, Cables, Conductors on a most modern Plant
Range of Products:
Overhead Conductors AAC & ACSR
Bare Copper Conductors
General Wiring PVC Insulated
Automobile Cables
Control Cables
Flexible Cables
Low Tension Power Cables
Low Tension XLPE Insulated Power Cables
Quadruplex Cables
High Tension XLPE Power Cables
Polythylene Insulated Cables
Air Field Ligthing Cables
Specialized Cables All Types
Introducing Tripple Extrusion XLPE Power Cables
The first Company in Pakistan to manufacture HT Cables upto 15KV. Pioneer Cables manufacture Wires, Cables, Conductors on a most modern Plant
Range of Products:
Overhead Conductors AAC & ACSR
Bare Copper Conductors
General Wiring PVC Insulated
Automobile Cables
Control Cables
Flexible Cables
Low Tension Power Cables
Low Tension XLPE Insulated Power Cables
Quadruplex Cables
High Tension XLPE Power Cables
Polythylene Insulated Cables
Air Field Ligthing Cables
Specialized Cables All Types
Introducing Tripple Extrusion XLPE Power Cables
Ababeel
FULL MEMBER
- Joined
- Sep 20, 2006
- Messages
- 1,050
- Reaction score
- -1
- Country
- Location
Bismillah Electronics Pakistan:
About Us
Bismillah Electronics was founded in 1990 by Dr. Inam Elahi Rana (present CEO). The company is smaller in size but has strong R&D group. The requirement of the customers is analyzed by our R & D group and a solution is proposed to the customer.The solution is implemented by our R & D department in the form of a product/sub-system/system. The product is then manufactured by our inhouse production facility. So far we have developed products like Front end of J band Radar, Telemetry tracking station, FM broadcast equipment, Satellite S band transmitters/receivers and educational training equipment. Our customer are mostly government departments, like NDC, Suparco and Air Weapon Complex. We also offer consultant services to the customer on their request.
Antenna Trainer AT-5000:
Antenna Trainer AT-5000 is a low cost high performance antenna training system.It is designed to be used in two distinct ways; for teaching and demonstrating common antenna configurations at all levels of study,and as a design tool by those engaged in research and development of projects in communication
Microstrip Trainer MS-3000:
The increasing use of microwaves,in application ranging from satellite and terres trial communications to high-speed computing and data transmission,has resulted in a short-fall of appropr iately trained engineers and technicians. Over three quarters of all microwave circuits are now non-waveguide.The swing towards microstrip technology must be reflected in the courses offered at engineering education institutes. recognising the urgent need for suitable training equipment,have developed a microstrip trainer which will provide the means to investigate the technology and techniques used in this important subject area.
Communication Trainer AM-3000:
Communication Trainer AM-3000 is a low cost high performance communication teaching system. Communication Trainer AM-3000 has been designed to act as basic tool for carrying out experiments in the field of communication for Technical Colleges & Engineering Universities undergraduate and graduate courses. AM-3000 has built in RF crystal oscillator, AF oscillator and regulated 12 volts and +5 volts power supplies. In addition there is a wide variety of plug in modules available for different types of experiments to be performed. This trainer is intended as a supplement to the textbook for communication course at junior, senior and graduate level students of electrical and electronics engineering, computer engineering and computer science. In addition, it can also be very useful for engineers from the industry who design and apply communication system in their products.
About Us
Bismillah Electronics was founded in 1990 by Dr. Inam Elahi Rana (present CEO). The company is smaller in size but has strong R&D group. The requirement of the customers is analyzed by our R & D group and a solution is proposed to the customer.The solution is implemented by our R & D department in the form of a product/sub-system/system. The product is then manufactured by our inhouse production facility. So far we have developed products like Front end of J band Radar, Telemetry tracking station, FM broadcast equipment, Satellite S band transmitters/receivers and educational training equipment. Our customer are mostly government departments, like NDC, Suparco and Air Weapon Complex. We also offer consultant services to the customer on their request.
Antenna Trainer AT-5000:
Antenna Trainer AT-5000 is a low cost high performance antenna training system.It is designed to be used in two distinct ways; for teaching and demonstrating common antenna configurations at all levels of study,and as a design tool by those engaged in research and development of projects in communication
Microstrip Trainer MS-3000:
The increasing use of microwaves,in application ranging from satellite and terres trial communications to high-speed computing and data transmission,has resulted in a short-fall of appropr iately trained engineers and technicians. Over three quarters of all microwave circuits are now non-waveguide.The swing towards microstrip technology must be reflected in the courses offered at engineering education institutes. recognising the urgent need for suitable training equipment,have developed a microstrip trainer which will provide the means to investigate the technology and techniques used in this important subject area.
Communication Trainer AM-3000:
Communication Trainer AM-3000 is a low cost high performance communication teaching system. Communication Trainer AM-3000 has been designed to act as basic tool for carrying out experiments in the field of communication for Technical Colleges & Engineering Universities undergraduate and graduate courses. AM-3000 has built in RF crystal oscillator, AF oscillator and regulated 12 volts and +5 volts power supplies. In addition there is a wide variety of plug in modules available for different types of experiments to be performed. This trainer is intended as a supplement to the textbook for communication course at junior, senior and graduate level students of electrical and electronics engineering, computer engineering and computer science. In addition, it can also be very useful for engineers from the industry who design and apply communication system in their products.
Ababeel
FULL MEMBER
- Joined
- Sep 20, 2006
- Messages
- 1,050
- Reaction score
- -1
- Country
- Location
Bismillah Electronics Pakistan:
Mono Pulse Tracking Station:
General Specification
1.8 Meter Parabolic Reflector Type Antenna
Reception Bandwidth 2200-2300 MHz
Polarization: RHCP
Positioner Type: Elevation on Azimuth
Excursion in Elevation : 0-90 degree
Excursion in Azimuth : 0-340 degree
General Specification
Antenna Type : Cross Dipole
Polarization Type : RHCP
Mono Pulse Tracking Station:
General Specification
1.8 Meter Parabolic Reflector Type Antenna
Reception Bandwidth 2200-2300 MHz
Polarization: RHCP
Positioner Type: Elevation on Azimuth
Excursion in Elevation : 0-90 degree
Excursion in Azimuth : 0-340 degree
General Specification
Antenna Type : Cross Dipole
Polarization Type : RHCP
Ababeel
FULL MEMBER
- Joined
- Sep 20, 2006
- Messages
- 1,050
- Reaction score
- -1
- Country
- Location
Bismillah Electronics Pakistan:
Front End of J-band surveillance RADAR
Design Philosophy
To develop a low cost man pack surveillance radar using off the shelf available components.
The design should be such that production of the radar can be started right away.
Specification of Radar RF End
Peak power: 1watt Noise figure: 3dB.
Pulse width:1 microsecond.
Type: Coherent.
Frequency range: 16.0-16.5 GHz.
Pulse to pulse frequency hopping (can be incorporated).
Front End of J-band surveillance RADAR
Design Philosophy
To develop a low cost man pack surveillance radar using off the shelf available components.
The design should be such that production of the radar can be started right away.
Specification of Radar RF End
Peak power: 1watt Noise figure: 3dB.
Pulse width:1 microsecond.
Type: Coherent.
Frequency range: 16.0-16.5 GHz.
Pulse to pulse frequency hopping (can be incorporated).
Ababeel
FULL MEMBER
- Joined
- Sep 20, 2006
- Messages
- 1,050
- Reaction score
- -1
- Country
- Location
Bismillah Electronics Pakistan:
Satellite Trainer ST-2400
Satellite Communication Trainer ST-2400 provides an in-depth study of basic Satellite Communication system. It consists of an Uplink Transmitter, a Satellite Link and a Downlink Receiver. The entire equipment can be conveniently placed in the laboratory. The Satellite Transponder receives signal (of selectable frequencies and three signals i.e. Audio, Video and Data simultaneously) from Uplink Transmitter and retransmits at different frequencies to a Downlink Receiver. The students can conduct large number of experiments by this trainer. This manual provides the basic theory, working and understanding of basic terms used in Satellite Communication along with experiments.
RF Synthesized Signal Generator SG-1000
Built-in-High performance processorand Direct Digital Synthesizer
Digital display and control pannel
1ppm High stabilty TCXO and internal moulation signal
Wide Frequency Range: 100KHz ~ 200MHz extend to 1000MHz
Frequency Resoliution: 1KHz
Level Flatness: 1dB
High Output Power: +13dBm
caliberated output upto -100dBM
Low phase noise -110dBc @ 10KHz offset
Modulation: FM/AM/FSK/PSK/ASK
RF Power Meter PM-6000
Wide bandwidth, 1 to 6000 MHz.
40 dB Dynamic Range, -20 to +20 dBm.
Good VSWR, 1.2:1 typ.
Automatic frequency calibration & temperature compensation.
Built in Application Measurement Software.
Effective, easy-to-use Windows® GUI.
SMA or N Type connector.
Pluge and play USB based.
Synthesized Digital Microwave Radio Link
Frequency 1.9 - 2.1 GHz
Transmitter Output Power 1 Watt with ALC
Receiver Dual conversion type
MDS -110dBm with AGC
Data rate 2Mbps
Block Diagram
Satellite Trainer ST-2400
Satellite Communication Trainer ST-2400 provides an in-depth study of basic Satellite Communication system. It consists of an Uplink Transmitter, a Satellite Link and a Downlink Receiver. The entire equipment can be conveniently placed in the laboratory. The Satellite Transponder receives signal (of selectable frequencies and three signals i.e. Audio, Video and Data simultaneously) from Uplink Transmitter and retransmits at different frequencies to a Downlink Receiver. The students can conduct large number of experiments by this trainer. This manual provides the basic theory, working and understanding of basic terms used in Satellite Communication along with experiments.
RF Synthesized Signal Generator SG-1000
Built-in-High performance processorand Direct Digital Synthesizer
Digital display and control pannel
1ppm High stabilty TCXO and internal moulation signal
Wide Frequency Range: 100KHz ~ 200MHz extend to 1000MHz
Frequency Resoliution: 1KHz
Level Flatness: 1dB
High Output Power: +13dBm
caliberated output upto -100dBM
Low phase noise -110dBc @ 10KHz offset
Modulation: FM/AM/FSK/PSK/ASK
RF Power Meter PM-6000
Wide bandwidth, 1 to 6000 MHz.
40 dB Dynamic Range, -20 to +20 dBm.
Good VSWR, 1.2:1 typ.
Automatic frequency calibration & temperature compensation.
Built in Application Measurement Software.
Effective, easy-to-use Windows® GUI.
SMA or N Type connector.
Pluge and play USB based.
Synthesized Digital Microwave Radio Link
Frequency 1.9 - 2.1 GHz
Transmitter Output Power 1 Watt with ALC
Receiver Dual conversion type
MDS -110dBm with AGC
Data rate 2Mbps
Block Diagram
Ababeel
FULL MEMBER
- Joined
- Sep 20, 2006
- Messages
- 1,050
- Reaction score
- -1
- Country
- Location
Bismillah Electronics Pakistan:
Telemetry Transmission & Reception Systems:
BTR-2250M Synthesized FM Telemetry Receiver
Frequency: 2200 – 2300 MHz Demodulation : FM/PCM
Max. input Power: -20dBm
Dynamic Range: 60dB
Noise Figure: +12dB
LO Stability: ±3ppm
Video Bandwidth: DC -1MHz
IF Bandwidth: 3.5MHz & 5MHz
AGC Mode: Manual or Automatic
RF Input Connector: N-Type (F)
Programmable Receiver Frequency
Modular Construction
Dual Bandwidth 3MHz or 5MHz selectable
Future Extension to Higher Frequency Band
Minimum Power Consumption .
BTR-2250M Software Define Synthesized FM Telemetry Receiver
Frequency : 2200 – 2300 MHz
Demodulation : FM/PCM
Max. input Power: -20dBm
Dynamic Range: 60dB
Noise Figure: +12dB
LO Stability: ±1ppm
Video Bandwidth: DC -1MHz
IF Bandwidth: 3.5MHz & 5MHz
AGC Mode: Manual or Automatic
RF Input Connector: N-Type (F)
Programmable Receiver Frequency
Modular Construction
Dual Bandwidth 3MHz or 5MHz selectable
Future Extension to Higher Frequency Band
Minimum Power Consumption .
BTT-2250M Synthesized FM Telemetry Transmitter
Frequency:2200–2300 MHz
Modulation:FM/PCM
Data Rate:1Mbps
Output Power:5 Watt
Input Supply:+28V DC
Operating Temperature:-10 to +70°C
Out of Band Rejection:-50dBc
Vibration: 20Hz to 2KHz
TNC Connector for RF O/P
High Density D-Type Connectors for Power and Signal
Telemetry Transmission & Reception Systems:
BTR-2250M Synthesized FM Telemetry Receiver
Frequency: 2200 – 2300 MHz Demodulation : FM/PCM
Max. input Power: -20dBm
Dynamic Range: 60dB
Noise Figure: +12dB
LO Stability: ±3ppm
Video Bandwidth: DC -1MHz
IF Bandwidth: 3.5MHz & 5MHz
AGC Mode: Manual or Automatic
RF Input Connector: N-Type (F)
Programmable Receiver Frequency
Modular Construction
Dual Bandwidth 3MHz or 5MHz selectable
Future Extension to Higher Frequency Band
Minimum Power Consumption .
BTR-2250M Software Define Synthesized FM Telemetry Receiver
Frequency : 2200 – 2300 MHz
Demodulation : FM/PCM
Max. input Power: -20dBm
Dynamic Range: 60dB
Noise Figure: +12dB
LO Stability: ±1ppm
Video Bandwidth: DC -1MHz
IF Bandwidth: 3.5MHz & 5MHz
AGC Mode: Manual or Automatic
RF Input Connector: N-Type (F)
Programmable Receiver Frequency
Modular Construction
Dual Bandwidth 3MHz or 5MHz selectable
Future Extension to Higher Frequency Band
Minimum Power Consumption .
BTT-2250M Synthesized FM Telemetry Transmitter
Frequency:2200–2300 MHz
Modulation:FM/PCM
Data Rate:1Mbps
Output Power:5 Watt
Input Supply:+28V DC
Operating Temperature:-10 to +70°C
Out of Band Rejection:-50dBc
Vibration: 20Hz to 2KHz
TNC Connector for RF O/P
High Density D-Type Connectors for Power and Signal
Ababeel
FULL MEMBER
- Joined
- Sep 20, 2006
- Messages
- 1,050
- Reaction score
- -1
- Country
- Location
Bismillah Electronics Pakistan:
Satellite Transmission & Reception Systems:
Satellite Transmitter
Frequency:2200 – 2300 MHz
Modulation - PM / QPSK
Data Rate:9.6 Kbps
Output Power:5Watt
S.T. Stability:±20 ppm
L. T. Stability:±7ppm
SMA Connector for RF O/P
High Density D-Type Connectors for Power and Signal .
Satellite Receiver
Frequency: 2025 – 2120 MHz
Modulation - PM / QPSK
Data Rate:9.6 Kbps
RF I/P Signal Level:-20dBm to -100dBm
S.T. Stability: ±20 ppm
L. T. Stability: ±7ppm
Current Consumption:160mA
Plug in type modular
High Density D-Type Connectors for Power and Signal .
Satellite Transmission & Reception Systems:
Satellite Transmitter
Frequency:2200 – 2300 MHz
Modulation - PM / QPSK
Data Rate:9.6 Kbps
Output Power:5Watt
S.T. Stability:±20 ppm
L. T. Stability:±7ppm
SMA Connector for RF O/P
High Density D-Type Connectors for Power and Signal .
Satellite Receiver
Frequency: 2025 – 2120 MHz
Modulation - PM / QPSK
Data Rate:9.6 Kbps
RF I/P Signal Level:-20dBm to -100dBm
S.T. Stability: ±20 ppm
L. T. Stability: ±7ppm
Current Consumption:160mA
Plug in type modular
High Density D-Type Connectors for Power and Signal .
Ababeel
FULL MEMBER
- Joined
- Sep 20, 2006
- Messages
- 1,050
- Reaction score
- -1
- Country
- Location
Bismillah Electronics Pakistan:
Passive Components:
Power Dividers
Insertion Loss: 0.3dB
VSWR: 1.1 : 1
Phase Imbalance: 4°
Amplitude Imbalance: 0.3dB
Bandwidth: 10MHz
RF Connector: TNC(F)
Vibration: 20Hz tp 2KHz at 0.04G .
P BAND BLADE ANTENNA
Frequency Range: 200-300MHz
Power Handling: 10 Watt
Polarization: Linear
VSWR: 1.5:1
Impedance: 50
Radiation Pattern: Hemisphere
Environ Temperature: 100-200°C .
Inter Digital & Comb Line Round Rod Band Pass Filter
Passive Components:
Power Dividers
Insertion Loss: 0.3dB
VSWR: 1.1 : 1
Phase Imbalance: 4°
Amplitude Imbalance: 0.3dB
Bandwidth: 10MHz
RF Connector: TNC(F)
Vibration: 20Hz tp 2KHz at 0.04G .
P BAND BLADE ANTENNA
Frequency Range: 200-300MHz
Power Handling: 10 Watt
Polarization: Linear
VSWR: 1.5:1
Impedance: 50
Radiation Pattern: Hemisphere
Environ Temperature: 100-200°C .
Inter Digital & Comb Line Round Rod Band Pass Filter
Ababeel
FULL MEMBER
- Joined
- Sep 20, 2006
- Messages
- 1,050
- Reaction score
- -1
- Country
- Location
Bismillah Electronics Pakistan:
Integrated Modules:
AFE-70MHz
AGC Block with IF Filter Bank with 5 different Bandwidth
65 dB dynamic range
Modular plug in type construction
Input level +10dBm to -70dBm
Output level 2V pk to pk
Digital bandwidth selection
Low Noise Amplifier
Low Noise Amplifier(2200MHz)
Bandwidth: 800MHz
Gain: >35dB typical at 25ºC
Impedance: 50O
Connector: SMA
NF 1.5dB at 25ºC
12/15 VDC
Integrated Modules:
AFE-70MHz
AGC Block with IF Filter Bank with 5 different Bandwidth
65 dB dynamic range
Modular plug in type construction
Input level +10dBm to -70dBm
Output level 2V pk to pk
Digital bandwidth selection
Low Noise Amplifier
Low Noise Amplifier(2200MHz)
Bandwidth: 800MHz
Gain: >35dB typical at 25ºC
Impedance: 50O
Connector: SMA
NF 1.5dB at 25ºC
12/15 VDC
Similar threads
