Indonesia Aerospace Forum
- Thread starter Indos
- Start date
ShioTikus
FULL MEMBER
New Recruit
- Joined
- Feb 16, 2015
- Messages
- 42
- Reaction score
- 0
- Country
- Location
RX 550 Rocket (LAPAN)
Numpang nanya, apakah roket RX550 ini udah pernah diuji-coba ??
Indos
PDF THINK TANK: ANALYST
- Joined
- Jul 25, 2013
- Messages
- 23,466
- Reaction score
- 24
- Country
- Location
Kalau uji coba resmi belum ( diliput pers dll), tapi yang tidak resmi saya tidak tahu. Rencananya tahun ini ada uji coba. Seharusnya tahun kemarin.
ShioTikus
FULL MEMBER
New Recruit
- Joined
- Feb 16, 2015
- Messages
- 42
- Reaction score
- 0
- Country
- Location
Oh begitu ya. Trims penjelasannya.
andai Kim Jong Un mau ngajarin kita bikin roket, pasti bakalan keren.
Indos
PDF THINK TANK: ANALYST
- Joined
- Jul 25, 2013
- Messages
- 23,466
- Reaction score
- 24
- Country
- Location
Indonesia to Build MALE UAV in Five Years
July 2, 2014
Tobapos -- For the next five years, Indonesia would build MALE (Medium Altitude Long Endurance/MALE) Unmanned Aircraft Vehicle (UAV) to boost surveillance mechanism in Indonesia.
"Its payload will be not only cameras, but also radars to observe objects in the ground," JokoPurnomo, Head of UAV (PUNA) program in state research center (BPPT) as reported by viva.co.id.
He said, currently, his institution was developing Wulung and Sriti UAV in Bandung.
"(All of it) are under production by Indonesia Aerospace in Bandung and will be commissioned by Ministry of Defense," he said.
He added, with flying range of 200 km, PUNA Wulung could be used to monitor Indonesia sea with 25 points of base station.
UAV Wulung
TOBAPOS: Indonesia to Build MALE UAV in Five Years
July 2, 2014
Tobapos -- For the next five years, Indonesia would build MALE (Medium Altitude Long Endurance/MALE) Unmanned Aircraft Vehicle (UAV) to boost surveillance mechanism in Indonesia.
"Its payload will be not only cameras, but also radars to observe objects in the ground," JokoPurnomo, Head of UAV (PUNA) program in state research center (BPPT) as reported by viva.co.id.
He said, currently, his institution was developing Wulung and Sriti UAV in Bandung.
"(All of it) are under production by Indonesia Aerospace in Bandung and will be commissioned by Ministry of Defense," he said.
He added, with flying range of 200 km, PUNA Wulung could be used to monitor Indonesia sea with 25 points of base station.
UAV Wulung
TOBAPOS: Indonesia to Build MALE UAV in Five Years
Last edited:
Indos
PDF THINK TANK: ANALYST
- Joined
- Jul 25, 2013
- Messages
- 23,466
- Reaction score
- 24
- Country
- Location
Turning back time a little bit to see our attempt in building jet transport plane N-2130 that started at 1994 and failed because of IMF condition to us (our government) not to inject money again to PT Dirgantara (before IPTN) during Asia Financial Crisis. At that time we had two program which is N-250 and N-2130 that needs money for aircraft development.
N2130 Regional Jet
Companies considering a regional jet (or participation in a program) include PT Industri Pesawat Terbang Nusantara (IPTN) of Indonesia. Indonesia has indicated its desire to bring to market the IPTN-designed N-2130 turbofan, a 104- to 132-seat aircraft that began as an outgrowth of its N-250 turboprop. The N250 turboprop carrier was the pride of Indonesia. Coming exactly a week before the 50th anniversary of Indonesia's declaration of independence from the Dutch, the first flight of the N-250 turboprop in August 1995 brimmed with symbolism. The successful first flight for Indonesia's new N-250 commercial airplane led to an announcement of a plan for a mid-range jet aircraft to be finished in 2003 or 2004. Experts said the new, $2 billion plan was even more ambitious, entering a fiercely competitive arena. Habibie's son, a former Boeing engineer, was to head it up.
The N2130 Technology Program (NTP) was launched in October 1994 as a market and product-definition study. The NTP team was headed by Habibie's eldest son, Ilham, and consists of IPTN's younger, so-called "second generation", design engineers and managers. Its work was to be concluded by March 1997, with the drafting of the aircraft's design requirements and objectives.
PT Dua Satu Tiga Puluh (DSTP) as owner or holding company was founded in 1995 [1996?], soon after IPTN N250's roll out. Though industry officials pointed to the aerospace sector's lack of skill in finding and attracting varied sources of capital, the industry had made some progress in securing alternate funding. PT Dua Satu Tiga Puluh (DSTP) was founded to function as IPTN's fund-raising agency for the N-2130. DSTP was to raise the $2 billion needed for the design, prototyping, and certification of the aircraft through the private investment of individuals, corporations, and foundations, and an initial shares offering to the Indonesian public.
The aircraft itself, the twin jet 80-130 passenger aircraft N2130, was put into design since 1994, while the plan was already announced three years earlier. According to the timetable presented by IPTN during the Le Bourget Paris Airshow 1995, on March 1997 N2130 should be on 'Design Requirements and Objective' phase, by April 1997, it should have been in the preliminary design process which will be finalized in 2000. According to the 1995 time table, the all-Indonesian-made aircraft would have its maiden flight on March 2004, and the very next month go into certification process until it finally delivered to its first operator on the June 2006 Indonesia Air Show.
Considering the cost and level of technology involved, some observers questioned whether the N2130 project was just a ticket to participation in one of the other various Asian 100-seater projects. In a market report published on 16 May 1996, the Teal Group dismissed the project as a scheme "driven by techno-nationalist fantasies, not market realities." Even Western firms jockeying for a spot on the aircraft were guarded about its prospects.
By late 1996 three versions were envisaged, with a 29.45m-long airframe serving as the baseline 100-seat design. This will be followed by an 80-seat, 22.20m-shrink version and a 39.20m-stretch derivative, seating up to 130 passengers, in a single-class configuration. Subsequent consultations with airlines, however, revealed little support for either an 80-seater or a five-abreast cabin cross-section. So by 1997 IPTN had dropped plans to develop a shortened, 80-seat, version of the planned N2130 short-haul jet-airliner and instead opted for a larger-aircraft family with six-abreast seating for between 104 and 132 passengers.
Designers opted for a 3.95m-diameter circular-section hull, while the length of the baseline aircraft was been lengthened by 1m, to 31.25m. The baseline N2130, tentatively designated the -100, would be able to accommodate 114 passengers in single-class configuration, with 812mm seat pitch, or 104 in a mixed two-class layout. The stretched, 33.86m-long, -200 version would seat up to 132 passengers in an all-tourist-class configuration. In the face of increased competition from other Asian consortia in the 100-seat jet market, by 1998 IPTN had opted to speed up development by 2 years, leading to planned production of the first N-2130 aircraft by 2002 and deliveries beginning in 2004.
A wing part of a 1:7.89 scale half-span wind tunnel model was designed and built for Indonesian Aircraft Industries (IPTN) in the years 1999/2000 by Vojnotehnièki Institut Ratka Resanoviæa [VTI], Beograd, Serbia. The wing segment comprised: wing, including main wing box (1805mm half-span), single-slotted flaps (4 positions), clean high-speed leading edges, slats, an immovable aileron, and installation for measurement of pressure distribution on seven chordwise wing sections, ·wing-fuselage fairing, through-flow nacelle (TFN) and its pylon, with instrumentation for measurement of pressure distribution, turbofan power simulator nacelle (TPS) and its pylon, with instrumentation for measurement of internal flow parameters and other installations necessary or the operation of the power simulator.
Most of the model was produced on CNC milling machines. For some specific components CNC EDM (electrode and wire-cut) was used. Artistic hand finish was applied when appropriate. Main parts were built from high-grade stainless steel, while the less stressed parts were made from aluminum alloy. Quality control was carried out on CMM coordinate measuring machines. Main parts of the wing were the outer and the inner wing box, each box assembled from the upper and the lower half. Sides of the boxes formed two main spars of the wing. Leading and trailing edge devices were detachable in order to enable changing of wing configuration.
In July 2000 the wing was transported to ONERA facilities at Tolouse and there was assembled with the fuselage-tail assembly. During the summer of the same year the model was successfully tested in F1 and S1 wind tunnels.
In the decade of the 1990's the human aspect once again took center stage in the design and operation of commercial aircraft. As occupation health and safety has gained importance in society in general, it has gained even more importance in the design an operation of commercial aircraft. In aircraft design today, the man-machine interface is considered in every task of the human workload. The discipline of ergonomics truly impacts each phase of product or tool design. At IPTN, the ergonomics effort is principally being applied to the design of the cockpit, cabin and cargo compartment of the N250. The ergonomists at IPTN are keenly aware that there would be a conflict between the user and his working environment without proper attention to the human considerations in the design is left for ergonomists and innovative programs like IPTN's participatory approach, to ensure that the human aspect is optimized in the man-machine interface.
Wwhile industry sources confirmed the existence of a potential Indonesian market for regional aircraft, opinions differed as to the size of this market, an important factor in IPTN's ability to achieve the economies of scale necessary to produce an international competitive aircraft. A feasibility study by IPTN projected that 25 percent of global demand for regional jet aircraft of approximately 100 seats will be met through sales of the N-2130, specifically 168 units domestically and 632 units internationally during 2005-2025.
By 1998 the Indonesian aircraft industry faced serious economic and political uncertainty because of the region's financial crisis. Nonetheless, Indonesian industry officials indicated that the aircraft industry was proceeding into the preliminary and detail design stages of the N-2130 program. Though IPTN had long supported a large aerospace work force, employees' work hours were cut to reduce expenditures and the company plans to lay off 3,000 workers in 1998.
Despite a possible postponement of 2-3 years, as of 1998 Indonesia intended to continue development of the N-2130 regional jet and looked to market the aircraft throughout Asia. In 1998 DSTP officials indicated that the company was considering listing its shares on the Jakarta Stock Exchange in 5-6 years and may eventually allow foreign investment. As of September 1997, DSTP raised 25 percent of the N-2130's development costs. However, the ability of DSTP to meet its goal of raising $2 billion by 2002 was uncertain. DSTP officials indicated that the country's financial situation had severely inhibited fund-raising abilities, and complaints over the public shares offering have reportedly prompted IPTN to call for a review of the company's methods of capital mobilization.
On September 29, 1999, PT Dua Satu Tiga Puluh (DSTP), the company responsible for N2130's funding, was officially dismissed. Its preliminary design was to be handed over to the Ministry of Industry and Trade, and the US$ 70 million spent on the design process was to be considered as 'sunk-cost'.
N2130 Regional Jet
N-2130 - Wikipedia bahasa Indonesia, ensiklopedia bebas
N2130 Regional Jet
Companies considering a regional jet (or participation in a program) include PT Industri Pesawat Terbang Nusantara (IPTN) of Indonesia. Indonesia has indicated its desire to bring to market the IPTN-designed N-2130 turbofan, a 104- to 132-seat aircraft that began as an outgrowth of its N-250 turboprop. The N250 turboprop carrier was the pride of Indonesia. Coming exactly a week before the 50th anniversary of Indonesia's declaration of independence from the Dutch, the first flight of the N-250 turboprop in August 1995 brimmed with symbolism. The successful first flight for Indonesia's new N-250 commercial airplane led to an announcement of a plan for a mid-range jet aircraft to be finished in 2003 or 2004. Experts said the new, $2 billion plan was even more ambitious, entering a fiercely competitive arena. Habibie's son, a former Boeing engineer, was to head it up.
The N2130 Technology Program (NTP) was launched in October 1994 as a market and product-definition study. The NTP team was headed by Habibie's eldest son, Ilham, and consists of IPTN's younger, so-called "second generation", design engineers and managers. Its work was to be concluded by March 1997, with the drafting of the aircraft's design requirements and objectives.
PT Dua Satu Tiga Puluh (DSTP) as owner or holding company was founded in 1995 [1996?], soon after IPTN N250's roll out. Though industry officials pointed to the aerospace sector's lack of skill in finding and attracting varied sources of capital, the industry had made some progress in securing alternate funding. PT Dua Satu Tiga Puluh (DSTP) was founded to function as IPTN's fund-raising agency for the N-2130. DSTP was to raise the $2 billion needed for the design, prototyping, and certification of the aircraft through the private investment of individuals, corporations, and foundations, and an initial shares offering to the Indonesian public.
Considering the cost and level of technology involved, some observers questioned whether the N2130 project was just a ticket to participation in one of the other various Asian 100-seater projects. In a market report published on 16 May 1996, the Teal Group dismissed the project as a scheme "driven by techno-nationalist fantasies, not market realities." Even Western firms jockeying for a spot on the aircraft were guarded about its prospects.
By late 1996 three versions were envisaged, with a 29.45m-long airframe serving as the baseline 100-seat design. This will be followed by an 80-seat, 22.20m-shrink version and a 39.20m-stretch derivative, seating up to 130 passengers, in a single-class configuration. Subsequent consultations with airlines, however, revealed little support for either an 80-seater or a five-abreast cabin cross-section. So by 1997 IPTN had dropped plans to develop a shortened, 80-seat, version of the planned N2130 short-haul jet-airliner and instead opted for a larger-aircraft family with six-abreast seating for between 104 and 132 passengers.
Designers opted for a 3.95m-diameter circular-section hull, while the length of the baseline aircraft was been lengthened by 1m, to 31.25m. The baseline N2130, tentatively designated the -100, would be able to accommodate 114 passengers in single-class configuration, with 812mm seat pitch, or 104 in a mixed two-class layout. The stretched, 33.86m-long, -200 version would seat up to 132 passengers in an all-tourist-class configuration. In the face of increased competition from other Asian consortia in the 100-seat jet market, by 1998 IPTN had opted to speed up development by 2 years, leading to planned production of the first N-2130 aircraft by 2002 and deliveries beginning in 2004.
A wing part of a 1:7.89 scale half-span wind tunnel model was designed and built for Indonesian Aircraft Industries (IPTN) in the years 1999/2000 by Vojnotehnièki Institut Ratka Resanoviæa [VTI], Beograd, Serbia. The wing segment comprised: wing, including main wing box (1805mm half-span), single-slotted flaps (4 positions), clean high-speed leading edges, slats, an immovable aileron, and installation for measurement of pressure distribution on seven chordwise wing sections, ·wing-fuselage fairing, through-flow nacelle (TFN) and its pylon, with instrumentation for measurement of pressure distribution, turbofan power simulator nacelle (TPS) and its pylon, with instrumentation for measurement of internal flow parameters and other installations necessary or the operation of the power simulator.
Most of the model was produced on CNC milling machines. For some specific components CNC EDM (electrode and wire-cut) was used. Artistic hand finish was applied when appropriate. Main parts were built from high-grade stainless steel, while the less stressed parts were made from aluminum alloy. Quality control was carried out on CMM coordinate measuring machines. Main parts of the wing were the outer and the inner wing box, each box assembled from the upper and the lower half. Sides of the boxes formed two main spars of the wing. Leading and trailing edge devices were detachable in order to enable changing of wing configuration.
In July 2000 the wing was transported to ONERA facilities at Tolouse and there was assembled with the fuselage-tail assembly. During the summer of the same year the model was successfully tested in F1 and S1 wind tunnels.
In the decade of the 1990's the human aspect once again took center stage in the design and operation of commercial aircraft. As occupation health and safety has gained importance in society in general, it has gained even more importance in the design an operation of commercial aircraft. In aircraft design today, the man-machine interface is considered in every task of the human workload. The discipline of ergonomics truly impacts each phase of product or tool design. At IPTN, the ergonomics effort is principally being applied to the design of the cockpit, cabin and cargo compartment of the N250. The ergonomists at IPTN are keenly aware that there would be a conflict between the user and his working environment without proper attention to the human considerations in the design is left for ergonomists and innovative programs like IPTN's participatory approach, to ensure that the human aspect is optimized in the man-machine interface.
Wwhile industry sources confirmed the existence of a potential Indonesian market for regional aircraft, opinions differed as to the size of this market, an important factor in IPTN's ability to achieve the economies of scale necessary to produce an international competitive aircraft. A feasibility study by IPTN projected that 25 percent of global demand for regional jet aircraft of approximately 100 seats will be met through sales of the N-2130, specifically 168 units domestically and 632 units internationally during 2005-2025.
By 1998 the Indonesian aircraft industry faced serious economic and political uncertainty because of the region's financial crisis. Nonetheless, Indonesian industry officials indicated that the aircraft industry was proceeding into the preliminary and detail design stages of the N-2130 program. Though IPTN had long supported a large aerospace work force, employees' work hours were cut to reduce expenditures and the company plans to lay off 3,000 workers in 1998.
Despite a possible postponement of 2-3 years, as of 1998 Indonesia intended to continue development of the N-2130 regional jet and looked to market the aircraft throughout Asia. In 1998 DSTP officials indicated that the company was considering listing its shares on the Jakarta Stock Exchange in 5-6 years and may eventually allow foreign investment. As of September 1997, DSTP raised 25 percent of the N-2130's development costs. However, the ability of DSTP to meet its goal of raising $2 billion by 2002 was uncertain. DSTP officials indicated that the country's financial situation had severely inhibited fund-raising abilities, and complaints over the public shares offering have reportedly prompted IPTN to call for a review of the company's methods of capital mobilization.
On September 29, 1999, PT Dua Satu Tiga Puluh (DSTP), the company responsible for N2130's funding, was officially dismissed. Its preliminary design was to be handed over to the Ministry of Industry and Trade, and the US$ 70 million spent on the design process was to be considered as 'sunk-cost'.
N2130 Regional Jet
N-2130 - Wikipedia bahasa Indonesia, ensiklopedia bebas
Last edited:
initial_d
FULL MEMBER
- Joined
- Dec 30, 2014
- Messages
- 597
- Reaction score
- -1
- Country
- Location
I wish indonesian army would purchase caracal instead of black hawk, mi 17 and chinook. at least caracal would be assembly in bandung, and will ease the maintenance of fewer helicopter force that the army have currently
Dante
FULL MEMBER
New Recruit
- Joined
- Dec 17, 2009
- Messages
- 85
- Reaction score
- 0
- Country
- Location
Well, AFAIK DI dont have license for the Caracal, and even the Cougar are partial conversion program from Super Puma airframe, in which are prone to accident
Re aligning the army rotary wing squadron to Bell 412, blackhawk, chinook and apache are the right thing to do
Indos
PDF THINK TANK: ANALYST
- Joined
- Jul 25, 2013
- Messages
- 23,466
- Reaction score
- 24
- Country
- Location
Indonesia, Spain agree to extend C295 co-operation
Jon Grevatt, Bangkok and Ridzwan Rahmat, Reporter, Singapore - IHS Jane's Defence Industry
11 February 2015
Indonesia and Spain have agreed to extend an agreement between PT Dirgantara Indonesia (PTDI) and Airbus Defence and Space featuring PTDI's licensed production Airbus C295 tactical transport aircraft for the Indonesian Air Force (TNI-AU).
A statement by the Indonesian Ministry of Defence (MoD) on 11 February said Indonesian Defence Minister Ryamizard Ryacudu and Spain's Ambassador to Indonesia, Francisco José Viqueira Niel, have agreed in principle to extend C295 co-operation.
An accord to facilitate such an arrangement, however, has not yet been signed and will depend on Indonesia ordering additional C295 aircraft. The TNI-AU is understood to have a requirement for a further seven units, taking its C295 inventory to 16 aircraft.
Indonesia, Spain agree to extend C295 co-operation - IHS Jane's 360
Jon Grevatt, Bangkok and Ridzwan Rahmat, Reporter, Singapore - IHS Jane's Defence Industry
11 February 2015
Indonesia and Spain have agreed to extend an agreement between PT Dirgantara Indonesia (PTDI) and Airbus Defence and Space featuring PTDI's licensed production Airbus C295 tactical transport aircraft for the Indonesian Air Force (TNI-AU).
A statement by the Indonesian Ministry of Defence (MoD) on 11 February said Indonesian Defence Minister Ryamizard Ryacudu and Spain's Ambassador to Indonesia, Francisco José Viqueira Niel, have agreed in principle to extend C295 co-operation.
An accord to facilitate such an arrangement, however, has not yet been signed and will depend on Indonesia ordering additional C295 aircraft. The TNI-AU is understood to have a requirement for a further seven units, taking its C295 inventory to 16 aircraft.
Indonesia, Spain agree to extend C295 co-operation - IHS Jane's 360
Indos
PDF THINK TANK: ANALYST
- Joined
- Jul 25, 2013
- Messages
- 23,466
- Reaction score
- 24
- Country
- Location
N-219 Prototype under construction (latest Picture)
Pict: Detik.com
Price Estimation : 3, 8 Million - 4,5 Million USD (with latest technology attached).
Much lower that its competitior Twin Otter which is around 6 Million USD each.
500 kg more payload than Twin Otter with similar fuel consumption.
Pict: Detik.com
Price Estimation : 3, 8 Million - 4,5 Million USD (with latest technology attached).
Much lower that its competitior Twin Otter which is around 6 Million USD each.
500 kg more payload than Twin Otter with similar fuel consumption.
Last edited:
Indos
PDF THINK TANK: ANALYST
- Joined
- Jul 25, 2013
- Messages
- 23,466
- Reaction score
- 24
- Country
- Location
Just old news, but just want to share some of this company capability since it has the potency to make engine for aircraft
PT Nusantara Turbin dan Propulsi (PT Dirgantara Subsidiary / State Owned )
Steam Turbine (Photo taken during joint company opening celebration/ 2012)
Pict: Bandung.bisnis.com
Jet Engine Turbine
(just illustration)
Source: Gas turbine - Wikipedia, the free encyclopedia
Jakarta, Nov 05, 2010
Siemens AG and PT. Nusantara Turbin dan Propulsi (NTP) are signing a joint venture for the manufacturing of industrial steam turbines to serve Indonesia’s growing energy market growing at around 6-7 percent annually. In addition to supporting various industries, the steam turbines will support the country’s conventional coal-fired power plants as well as renewable power plants based on geothermal, biomass, waste and solar thermal. The Indonesian Ministry of Industry, who had been actively encouraging this cooperation since 2009, is witnessing the signing ceremony between the two companies. Siemens will hold 60 percent of the shares and NTP the rest. The combined investment is approximately EUR12 million. In the initial phase, the new company will create jobs for 100 people and is targeting a production capacity of at least 40 units of steam turbines annually. The production facility is located in Bandung, West Java, Indonesia and will start operation in March 2011.
“Siemens intends to expand its presence in Indonesia’s growing energy market,” said Dr. Markus Tacke, CEO of the Oil and Gas Division for Industrial Power of the Energy Sector of Siemens AG, Germany. We see a huge potential in the steam turbine markets for domestic consumption to support Indonesia’s aggressive acceleration program for electricity generation and development of various industries, such as sugar; fertilizer, crude palm oil, cement, oil refinery and chemical. Together with NTP as our partner, we will build up state-of-art production facility for industrial steam turbine. With our combined experience within the energy sector, we will offer our customers industrial steam turbines with highest reliability and efficiency to support their plant’s processes.”
The agreement also encompasses the transfer of technology for industrial steam turbines and to comply with Indonesia Industrial Minister’s regulation on achieving 40 percent of Domestic Component Level (Tingkat Komponen Dalam Negeri - TKDN). We envisage that our main customers will be the state-owned power utility, PT. PLN (Persero) and the various industries.
“NTP is proud to be a part of this important milestone for the industry community in Indonesia by forming this joint venture with Siemens AG. Not only that Siemens is a highly recognized global brand and has the biggest market share for industrial steam turbines in the world, but Siemens is also prepared to develop the manufacturing of steam turbines of up to 250MW capacity,” stated Supra Dekanto, NTP’s President Director.
Since 2005, Indonesia’s Agency for the Assessment and Application of Technology (BPPT) and NTP have started to develop turbines with 450HP, 2MW to 4MW capacity. The production was jointly executed with a number of industries which also include small industries located in Bandung, Cikarang, and Jakarta areas. The number of clusters continues to be added every year and developed to meet the required quality. The program is still currently still ongoing and in 2010, BPPT together with NTP design and produce steam turbines for geothermal demands of 3MW capacity. Both domestic industry and the Government must see this as opportunity and trigger for industrialization. Indonesia must no longer be considered as a user but rather as an industrialist. This will soon become a reality if we join forces.
The newly formed joint venture company will initially be producing steam turbines for both condensing and back pressure types with a capacity ranging from 3MW to 15MW called the Siemens SST-140. More than 100 units of this particular steam turbine type have been installed in several countries. In order to increase its efficiency and TKDN, design of some parts will be upgraded. There are 3 units which have been successfully operating in Indonesia, including PT. Kaltim Methanol Industri (KMI) in Bontang, East Kalimantan. This particular type is expected to meet the standard of PLN and Sugar Factories. It has a compact design and in one variant, the condenser is located at the base plate of the steam turbine – this will also reduce installation cost. The dimension and weight of this particular steam turbine is relatively small so it can greatly reduce logistic and shipping costs. The overall cost reduction will surely impact the total cost of building a steam power plant.
--------------------------------------------------------------------------------------------------------------------------------------------
About Siemens in IndonesiaSiemens has been active for 100 years in Indonesia, where it holds leading positions in its Energy, Industry, and Healthcare Sectors. The two manufacturing facilities in Pulo Mas, Jakarta and Cilegon, Banten have become the Siemens’ international centers of competence respectively for the production of switchgear panels and large-steel assembly for power plants conducting export throughout the world.
The Siemens Energy Sector is the world’s leading supplier of a complete spectrum of products, services and solutions for the generation, transmission and distribution of power and for the extraction, conversion and transport of oil and gas. In fiscal 2009 (ended September 30), the Energy Sector had revenues of approximately EUR25.8 billion and received new orders totaling approximately EUR30 billion and posted a profit EUR3.3 billion. On September 20, 2009, the Energy Sector had a workforce of more than 85,100. Further information is available at: www.siemens.com/energy
PT. Nusantara Turbin dan Propulsi (NTP) is a well established company in Indonesia since 1998. The company is performing industrial repair and overhaul for the highly sophisticated Aircraft Gas Turbine Engines and Rotating Equipments. With approximately 400 workforce, the company’s facility is located adjacent to Husein Sastranegara Airport, Bandung, West Java. NTP is suported by original manufacturer such as Honeywell, Rolls-Royce, Pratt & Whitney, General Electric and Solar Turbine. The company has successfully obtained certifications from various aviation authorities like (DGCA-Indonesia, FAA-USA, EASA-EU). Further information is available at: www.umcntp.co.id
Press Releases > Siemens strengthens industrial steam turbine business in Indonesia with new partnership > Siemens strengthens industrial steam turbine business in Indonesia with new partnership > Siemens strengthens industrial steam turbine business in Indonesia with new partnership > Siemens strengthens industrial steam turbine business in Indonesia with new partnership
PT Nusantara Turbin dan Propulsi (PT Dirgantara Subsidiary / State Owned )
Steam Turbine (Photo taken during joint company opening celebration/ 2012)
Pict: Bandung.bisnis.com
Jet Engine Turbine
(just illustration)
Source: Gas turbine - Wikipedia, the free encyclopedia
Jakarta, Nov 05, 2010
Siemens AG and PT. Nusantara Turbin dan Propulsi (NTP) are signing a joint venture for the manufacturing of industrial steam turbines to serve Indonesia’s growing energy market growing at around 6-7 percent annually. In addition to supporting various industries, the steam turbines will support the country’s conventional coal-fired power plants as well as renewable power plants based on geothermal, biomass, waste and solar thermal. The Indonesian Ministry of Industry, who had been actively encouraging this cooperation since 2009, is witnessing the signing ceremony between the two companies. Siemens will hold 60 percent of the shares and NTP the rest. The combined investment is approximately EUR12 million. In the initial phase, the new company will create jobs for 100 people and is targeting a production capacity of at least 40 units of steam turbines annually. The production facility is located in Bandung, West Java, Indonesia and will start operation in March 2011.
“Siemens intends to expand its presence in Indonesia’s growing energy market,” said Dr. Markus Tacke, CEO of the Oil and Gas Division for Industrial Power of the Energy Sector of Siemens AG, Germany. We see a huge potential in the steam turbine markets for domestic consumption to support Indonesia’s aggressive acceleration program for electricity generation and development of various industries, such as sugar; fertilizer, crude palm oil, cement, oil refinery and chemical. Together with NTP as our partner, we will build up state-of-art production facility for industrial steam turbine. With our combined experience within the energy sector, we will offer our customers industrial steam turbines with highest reliability and efficiency to support their plant’s processes.”
The agreement also encompasses the transfer of technology for industrial steam turbines and to comply with Indonesia Industrial Minister’s regulation on achieving 40 percent of Domestic Component Level (Tingkat Komponen Dalam Negeri - TKDN). We envisage that our main customers will be the state-owned power utility, PT. PLN (Persero) and the various industries.
“NTP is proud to be a part of this important milestone for the industry community in Indonesia by forming this joint venture with Siemens AG. Not only that Siemens is a highly recognized global brand and has the biggest market share for industrial steam turbines in the world, but Siemens is also prepared to develop the manufacturing of steam turbines of up to 250MW capacity,” stated Supra Dekanto, NTP’s President Director.
Since 2005, Indonesia’s Agency for the Assessment and Application of Technology (BPPT) and NTP have started to develop turbines with 450HP, 2MW to 4MW capacity. The production was jointly executed with a number of industries which also include small industries located in Bandung, Cikarang, and Jakarta areas. The number of clusters continues to be added every year and developed to meet the required quality. The program is still currently still ongoing and in 2010, BPPT together with NTP design and produce steam turbines for geothermal demands of 3MW capacity. Both domestic industry and the Government must see this as opportunity and trigger for industrialization. Indonesia must no longer be considered as a user but rather as an industrialist. This will soon become a reality if we join forces.
The newly formed joint venture company will initially be producing steam turbines for both condensing and back pressure types with a capacity ranging from 3MW to 15MW called the Siemens SST-140. More than 100 units of this particular steam turbine type have been installed in several countries. In order to increase its efficiency and TKDN, design of some parts will be upgraded. There are 3 units which have been successfully operating in Indonesia, including PT. Kaltim Methanol Industri (KMI) in Bontang, East Kalimantan. This particular type is expected to meet the standard of PLN and Sugar Factories. It has a compact design and in one variant, the condenser is located at the base plate of the steam turbine – this will also reduce installation cost. The dimension and weight of this particular steam turbine is relatively small so it can greatly reduce logistic and shipping costs. The overall cost reduction will surely impact the total cost of building a steam power plant.
--------------------------------------------------------------------------------------------------------------------------------------------
About Siemens in IndonesiaSiemens has been active for 100 years in Indonesia, where it holds leading positions in its Energy, Industry, and Healthcare Sectors. The two manufacturing facilities in Pulo Mas, Jakarta and Cilegon, Banten have become the Siemens’ international centers of competence respectively for the production of switchgear panels and large-steel assembly for power plants conducting export throughout the world.
The Siemens Energy Sector is the world’s leading supplier of a complete spectrum of products, services and solutions for the generation, transmission and distribution of power and for the extraction, conversion and transport of oil and gas. In fiscal 2009 (ended September 30), the Energy Sector had revenues of approximately EUR25.8 billion and received new orders totaling approximately EUR30 billion and posted a profit EUR3.3 billion. On September 20, 2009, the Energy Sector had a workforce of more than 85,100. Further information is available at: www.siemens.com/energy
PT. Nusantara Turbin dan Propulsi (NTP) is a well established company in Indonesia since 1998. The company is performing industrial repair and overhaul for the highly sophisticated Aircraft Gas Turbine Engines and Rotating Equipments. With approximately 400 workforce, the company’s facility is located adjacent to Husein Sastranegara Airport, Bandung, West Java. NTP is suported by original manufacturer such as Honeywell, Rolls-Royce, Pratt & Whitney, General Electric and Solar Turbine. The company has successfully obtained certifications from various aviation authorities like (DGCA-Indonesia, FAA-USA, EASA-EU). Further information is available at: www.umcntp.co.id
Press Releases > Siemens strengthens industrial steam turbine business in Indonesia with new partnership > Siemens strengthens industrial steam turbine business in Indonesia with new partnership > Siemens strengthens industrial steam turbine business in Indonesia with new partnership > Siemens strengthens industrial steam turbine business in Indonesia with new partnership
Last edited:
Indos
PDF THINK TANK: ANALYST
- Joined
- Jul 25, 2013
- Messages
- 23,466
- Reaction score
- 24
- Country
- Location
So, KAL will be proposing South Korea and European team up version, the thing that quite positive on that is their ability to give more TOT than American one. Regardless who exactly will be the winner of the bidding, South Korea will still get significant TOT from their F-35 acquisition that can be used for KFX program. I believe the design will still use C-103 since it is already the result of the first phase of KFX project. So, this bidding is more like avionics, engine, and price competition than design one since it is done already. So previous article is rather showing bad jurnalism than any valuable information.
By the way, PT Dirgantara also has made a joint company with General Electric in turbine maintenance, even though not as significant as PT Nusantara Turbine (PT Dirgantara subsidiary) cooperation with Siemen which produces steam turbine, but at least we still can get knowledge from that. It seems European companies are more generous to us than American one
The company name is PT GE Nusantara Turbine
This one I bring General Electric proposal to KFX/IFX program
GE offers to power Korea's KFX aircraft in collaboration with local industry
Jon Grevatt, Bangkok - IHS Jane's Defence Industry
21 August 2014
General Electric (GE) intends bidding to supply engines to power the Republic of Korea Air Force's (RoKAF's) proposed KFX indigenous fighter aircraft.
The company said on 21 August that if selected to participate in the KFX programme, it would build the powerplants in collaboration with local industry, ensuring more than half the KFX engine components were made and assembled in South Korea.
According to South Korean media reports, the government will issue a tender to continue the full development of the aircraft before the end of 2014, with Korea Aerospace Industries (KAI) likely to be selected to lead the programme in collaboration with foreign system developers.
GE offers to power Korea's KFX aircraft in collaboration with local industry - IHS Jane's 360
Similar threads
Latest posts
-
Bajwa calls Bushra's allegations against Saudi Arabia 'baseless'
- Latest: Novus ordu seclorum
-
-
-
-
Pakistan Affairs Latest Posts
-
Bajwa calls Bushra's allegations against Saudi Arabia 'baseless'
- Latest: Novus ordu seclorum
-
-
-
-
