What's new

Chengdu J-10 Multirole Fighter Air Craft News & Discussions

Overhypiing it without sustance will become a joke instead of psychological effect.

Not only India know nuts about JFT and J-10B. They know nuts about PL-12 BVRAAM. They don't even know what frequency it operate, not to mention jamming them. While china has great experience in R-77 missiles. India astra is no where to be commission. By the time, it complete, other generation of missile has already supercede.

I think you pretty much said the truth. While China is still being ignored and banned by western economies (because it has or will beat them) it is forced to go its own way. We know the dual use boycot... It has to build copies and then evolve with real Chinese products. See the change in Mig19/21 copies towards JF17/J10 and now J20. We here about Lavi or other bashings but we all can see that they evolve faster then anyone else. That is not an normal achievement but something we all see that we did not see it or expect it in this decade. It has the cash, the knowledge and manpower. At the same time the Indians are shouting from every rooftop that they will build their fighterjets. We all saw what that was. Bad investment and bad products. There is no Indian product that is 100% (maybe 10%) Indian. And even then it is not good enough to compete with others. Indians know that is why it is running to every customer. Billions are thrown out but what will it bring to India? I bet a lot less then what the plans were. It stays dependent. It can not produce decent weapon yet it want to be seen as a worldpower. Now it is nothing more then master buyer from Russia and USA. This will not improve as long as it has a foundation to do it in India.
 
13128210150326688430475.jpg


53544101503219026704757.jpg


55844101503210460354757.jpg


15432010150320099620475.jpg


55587101503266908254757.jpg
 
Is that a J-11 in the last picture?, and the patch says sherdil??

No its a J-10 , and the Sherdil is written on the patch because he is a pilot from Sherdil team, he was there to perform aerobatics along with the other team members during the air show in China
 
Although not now.
but WS10 will have TVC version in future is what zhangenhe(chief designer of WS10) said recently .
We shall produce such kind of engine, which is doubtless

Do you have a Chinese link for that? I haven't seen it yet.
 

I've seen this photograph hundreds of times lol. The reason I asked Houshanghai was because he mentioned that one of WS-10's designers officially stated that they are developing a thrust vectored variant of WS-10. I thought it might be an interesting read.
 
I've seen this photograph hundreds of times lol. The reason I asked Houshanghai was because he mentioned that one of WS-10's designers officially stated that they are developing a thrust vectored variant of WS-10. I thought it might be an interesting read.

其实太行矢量早就有了,386当年看的就是太行的矢量喷口的图片,只不过为了稳定加快进度没有用,太行改是三代半就必须有矢量了

 张恩和:我觉得有以下这么几个方面的启示:
  启示之一是要加大基础研究工作的力度。我们这支队伍在基础研究和基础理论方面还需要多花点力量。也就是说我们的基础研究能力有待加强,技术储备还要增强。如果这种情况不改变,今后的研制会很吃力,再上台阶就很难了。"太行"发动机是"三代机",要想在它基础上改进改型,进一步提高性能上水平,向"三代半"迈进,就必须上些新的东西,用几项四代水平的新技术,如:采用电调系统;装用矢量推力喷口;使用瓦片式燃烧室等。这些势必要求我们提前着眼新设计、新材料、新工艺,进行大量结构、部件、工艺等的研究和试验。"太行"发动机研制整整用了18年,而国外一个发动机型号研制仅需10年左右。就是因为我们发动机的各项关键技术几乎都是在型号立项后同步走的,所以还要一项项去攻关。而先进国家发动机研制的规律是,当发动机型号立项时,许多上水平的关键技术已经预先取得成功了,型号立项后只需进行整机集成。
  启示之二是要实现新机研制过程中硬件生产的快速反应。一种新型发动机研制要分几个批次,设计完成之后先生产,不仅要把整机制造出来,还要把一些部件制造出来,然后分别用来做各种整机试验和部件试验;问题暴露出来后修改设计,再投一批;然后再改、再投一个批次。现在我们走一个批次,大概需要2-3年时间。在一些发达国家,发动机生产时间只有6-9个月;而我们生产出一台发动机快的1年半,慢的两年。三年一个周期,硬件生产就占了两年,太长了。如果硬件生产周期可以缩短,"太行"发动机的研制成功就会提前。
  启示之三是要坚持不懈地加强发动机研制人才队伍建设。现在虽然有了经过"太行"研制锻炼的技术人员队伍,但还远远不够。搞发动机研制,人是第一重要的,没有人,什么也搞不成。从我们所的情况来看,技术人员绝对数量少,在全所员工中所占的比例也少,不能满足发动机研制新形势的要求,应该进一步壮大这支队伍。而且,技术人员承担的科研任务很重,白天黑夜地干,没有时间进行系统地学习和深造。各级领导应该积极创造条件让技术人员进一步接受再教育,不断充电,实现技术能力的提升,这样才能保证这支队伍在未来担当重任,创造出更出色的成绩。


·ÃÌ«ÐÐ×ÜʦÕŶ÷ºÍ - ·ÉÑï¾üÊ - ÐÅÏ¢×ÊѶ - [¾üÊÂÖ÷Ìâ] - Ó¥»÷³¤¿Õ

google translate

En and: I think that the following aspects of such a revelation:
One revelation is to increase the basic research efforts. Our team in basic research and basic theory needed to spend more power points. That is our basic research capabilities to be strengthened, but also enhance the technical reserves. If this does not change, future research will be very difficult, higher level will be very difficult. "Taihang" engine is a "third generation machine", in order to improve it, based on modifications to further improve the performance level to the "Three and a half," forward, it must be on some new things, with several levels of four generations of new technologies such as: the use of electronic transfer system; equipped with thrust-vectoring nozzle; use tile combustion chamber and so on. These will inevitably require us to look ahead of the new design, new materials, new processes, a great deal of structure, components, technology and other research and testing. "Taihang" engine developed a whole spent 18 years, and foreign developed an engine model is only about 10 years. Is because the engine of the key technologies we are almost in sync after the model project to go, so also a key to the research. The engine developed by advanced countries, the law is that when the engine model project, many key technologies on the level of pre-made successful, model for the whole project only after the integration.
The second revelation is to achieve a new machine developed during the hardware production of rapid response. To develop a new engine in several batches, the first production after the design is completed, not only to machine manufactured, but also some parts manufactured, and then were used for a variety of machine testing and component testing; problems exposed modify the design came out, and then cast a group; and then change, then vote in a batch. Now we walk a lot, takes about 2-3 years. In some developed countries, the engine production for only 6-9 months; and we produce a fast one and a half years the engine, slow for two years. A three-year cycle, hardware production accounted for two years too long. If the hardware can shorten production cycle, "Taihang" engine will be developed in advance.
Implications of the three engines is to make unremitting efforts to strengthen the development of qualified personnel. Although there has been now been "Taihang" develop training of technical personnel, but not enough. Engaged in engine development, people are the first important, no one, nothing can be done. From our situation, the absolute number of small technical staff in the whole of the proportion of employees less, the engine can not meet the requirements of the new situation developed, should further strengthen the team. Moreover, the technical research tasks undertaken by heavy, dry day and night, no time for systematic study and further studies. Leaders at all levels should actively create conditions to allow technical staff to further re-education, continued charging, the ability to achieve technological upgrading, so as to ensure that the team take a leading role in the future to create better results.


还有这篇八股:


以航空发动机的尾喷管为例,几十年来尾喷管采用了大量先进的结构设计。已经从一种简单的热排气收缩管道,演变成在现代飞机设计中一种可变几何形状和可实现多种任务的非常复杂的部件。新的任务包括控制推力大小、实现反推力、实现矢量推力、抑制噪声和红外辐射等。为了达到这些目的,必须在喷管冷却、驱动和制造方面有所进展。

http://news.xinhuanet.com/mil/2011-07/29/c_121738269_2.htm
 
Mastan sahib, its not psychology but the abiility to lure one's opponent to play by one's rule, this is where FC-20 and JFT are essential, their strenghts and weaknesses are classified and not many outside China and Pakistan know about it, this is the very reason why FC-1 is different from JFT and J-10B will see only exlusive operation. We all talk about Supermanuverbility and TVC and stuff, do you think even a fighter packed with all these goodies can outmanuver a HOBS,advanced, resiliant and TVC equipped missile? why to go for merge and enter a turning fight when your missile can do it way way much better than your platform. where does the manuverbility count when your oppoenet can virtually lock you on in every direction above, below, ahead and behind and feed a missile quickly up your aircraft's @ss.

Hasnain,

In this day and age of technology----it is very easy to simulate and find the capabilities of an opponents aircraft by capable aeronautical engineers with the right computer programming. A higher calibre engineer can just look at the aircraft design and engine capacity and tell you what it can do within what parameters.

When we use the term 'lure somebody into doing something'----to me it cheapens the things---there is no luring from our side----as a matter of fact---we are being lured into spending more than what we can afford to----.

TVC is showboating and nothing more---it cannot out smart 21st century missiles.
 
hey guys im little "late" in this thread but how is the j-10 compared to the f16 we currently have and when will the j-10s be delivered to paf?
 
Back
Top Bottom