CBI files FIR against firm that passed off Chinese parts as German for Dhanush artillery guns

[tw00tw00]

http://indianexpress.com/article/in...e-parts-as-german-for-artillery-guns-4761830/

CBI files FIR against firm that passed off Chinese parts as German for Dhanush artillery guns
According to the CBI FIR, the purchase of the spares at a cost of over Rs 50 lakh was done through a conspiracy hatched between Delhi-based company Sindh Sales Syndicate and unknown officials of the Guns Carriage Factory, Jabalpur.

According to the CBI FIR, the purchase of the spares at a cost of over Rs 50 lakh was done through a conspiracy hatched between Delhi-based company Sindh Sales Syndicate and unknown officials of the Guns Carriage Factory, Jabalpur.

• 
  Haryana cop’s suicide: Punjab and Haryana High Court orders CBI probe
• 
  Suspected money laundering: CBI registers case against 19 companies
• 
  CBI summons 11 NDA faculty members for questioning

The CBI has filed an FIR in connection with supply of fake spare parts for an indigenous version of the Bofors artillery gun, alleging that a private company supplied Chinese parts camouflaged as made-in-Germany spares. The spares were to be used in the Dhanush artillery guns, a product developed by the Ordnance Factory Board after the Bofors scandal stalled acquisition of artillery guns.

According to the CBI FIR, the purchase of the spares at a cost of over Rs 50 lakh was done through a conspiracy hatched between Delhi-based company Sindh Sales Syndicate and unknown officials of the Guns Carriage Factory, Jabalpur.

“Unknown officials of GCF accepted the Chinese manufactured ‘Wire Race Roller Bearings’, supplied by Sindh Sales Syndicate which were embossed as ‘CRB-Made in Germany’,” the CBI said in the FIR. A tender was floated for procurement of four bearings, in which four firms had participated.

The order was given to Sindh Sales Syndicate at the value of Rs 35.38 lakh in 2013, the FIR said. The order was increased to six bearings at the cost of Rs 53.07 lakh on August 27, 2014. The company supplied two bearings each thrice between April 7, 2014, and August 12, 2014, and submitted “certificates in origin” showing the bearings were procured from CRB Antriebstechnik, Germany. GCF tests showed that the bearings were unacceptable due to deviations in dimension.

The firm assured the GCF that it would replace the bearings free of cost in case of non-performance. “…the bearings were accepted as a special case by unknown officials of GCF, Jabalpur,” the CBI said. Information with the CBI shows the German firm does not manufacture these spares and that Sindh Sales Syndicate got the bearings manufactured by Sino United Industries (Luyang) Ltd Henan, China.

 

[tw00tw00]

Make (frauds) in India!

http://indianexpress.com/article/in...e-parts-as-german-for-artillery-guns-4761830/

CBI files FIR against firm that passed off Chinese parts as German for Dhanush artillery guns

According to the CBI FIR, the purchase of the spares at a cost of over Rs 50 lakh was done through a conspiracy hatched between Delhi-based company Sindh Sales Syndicate and unknown officials of the Guns Carriage Factory, Jabalpur.

The CBI has filed an FIR in connection with supply of fake spare parts for an indigenous version of the Bofors artillery gun, alleging that a private company supplied Chinese parts camouflaged as made-in-Germany spares. The spares were to be used in the Dhanush artillery guns, a product developed by the Ordnance Factory Board after the Bofors scandal stalled acquisition of artillery guns.

According to the CBI FIR, the purchase of the spares at a cost of over Rs 50 lakh was done through a conspiracy hatched between Delhi-based company Sindh Sales Syndicate and unknown officials of the Guns Carriage Factory, Jabalpur.

“Unknown officials of GCF accepted the Chinese manufactured ‘Wire Race Roller Bearings’, supplied by Sindh Sales Syndicate which were then embossed as ‘CRB-Made in Germany’,” the CBI said in the FIR. A tender was floated for procurement of four bearings, in which four firms had participated.

The order was given to Sindh Sales Syndicate at the value of Rs 35.38 lakh in 2013, the FIR said. The order was increased to six bearings at the cost of Rs 53.07 lakh on August 27, 2014. The company supplied two bearings each thrice between April 7, 2014, and August 12, 2014, and submitted “certificates in origin” showing the bearings were procured from CRB Antriebstechnik, Germany. GCF tests showed that the bearings were unacceptable due to deviations in dimension.

The firm assured the GCF that it would replace the bearings free of cost in case of non-performance. “…the bearings were accepted as a special case by unknown officials of GCF, Jabalpur,” the CBI said. Information with the CBI shows the German firm does not manufacture these spares and that Sindh Sales Syndicate got the bearings manufactured by Sino United Industries (Luyang) Ltd Henan, China.

 

[Joe Shearer]

Make (frauds) in India!

http://indianexpress.com/article/in...e-parts-as-german-for-artillery-guns-4761830/

CBI files FIR against firm that passed off Chinese parts as German for Dhanush artillery guns

According to the CBI FIR, the purchase of the spares at a cost of over Rs 50 lakh was done through a conspiracy hatched between Delhi-based company Sindh Sales Syndicate and unknown officials of the Guns Carriage Factory, Jabalpur.

The CBI has filed an FIR in connection with supply of fake spare parts for an indigenous version of the Bofors artillery gun, alleging that a private company supplied Chinese parts camouflaged as made-in-Germany spares. The spares were to be used in the Dhanush artillery guns, a product developed by the Ordnance Factory Board after the Bofors scandal stalled acquisition of artillery guns.

According to the CBI FIR, the purchase of the spares at a cost of over Rs 50 lakh was done through a conspiracy hatched between Delhi-based company Sindh Sales Syndicate and unknown officials of the Guns Carriage Factory, Jabalpur.

“Unknown officials of GCF accepted the Chinese manufactured ‘Wire Race Roller Bearings’, supplied by Sindh Sales Syndicate which were then embossed as ‘CRB-Made in Germany’,” the CBI said in the FIR. A tender was floated for procurement of four bearings, in which four firms had participated.

The order was given to Sindh Sales Syndicate at the value of Rs 35.38 lakh in 2013, the FIR said. The order was increased to six bearings at the cost of Rs 53.07 lakh on August 27, 2014. The company supplied two bearings each thrice between April 7, 2014, and August 12, 2014, and submitted “certificates in origin” showing the bearings were procured from CRB Antriebstechnik, Germany. GCF tests showed that the bearings were unacceptable due to deviations in dimension.

The firm assured the GCF that it would replace the bearings free of cost in case of non-performance. “…the bearings were accepted as a special case by unknown officials of GCF, Jabalpur,” the CBI said. Information with the CBI shows the German firm does not manufacture these spares and that Sindh Sales Syndicate got the bearings manufactured by Sino United Industries (Luyang) Ltd Henan, China.

There is some confusion in your mind.

The parts were sold by fraud in India, not made in India. They were made in China.

 

[tw00tw00]

There is some confusion in your mind.

The parts were sold by fraud in India, not made in India. They were made in China.

It's called sarcasm. Hello?

 

[Joe Shearer]

It's called sarcasm. Hello?

I am so embarrassed! It is just that I am not used to the delicate touch from some of you. And that was a deft edit to insert the (frauds). Umm, a trifle fraudulent, but what the heck.

 

[tw00tw00]

I am so embarrassed! It is just that I am not used to the delicate touch from some of you. And that was a deft edit to insert the (frauds). Umm, a trifle fraudulent, but what the heck.

Now I know you are also blind. The post was never edited. If it had been edited, it would say "last edited" in the lower right hand corner.

 

[Joe Shearer]

Now I know you are also blind. The post was never edited. If it had been edited, it would say "last edited" in the lower right hand corner.

That makes little or no difference. When your crowd walks around demolishing everything in sight by weight of numbers, it is unusual to come across sarcasm. Unless it is expressed in the grossest possible terms.

 

[Joe Shearer]

And now you are being stupid.

Of course. You are the authority on these things.

 

[Chhatrapati]

It's called sarcasm. Hello?

That was poor attempt. Even though it was evident that the one of the fraud in here is China.

 

[tw00tw00]

That was poor attempt. Even though it was evident that the one of the fraud in here is China.

Did you read the article? It was an Indian firm that imported generic Chinese parts not designed for the Dhanush and then embossed them with "Made in Germany".

It's yet another Made-in-India fraud.

I must be, to still be reading you. Think of the others reading this.

Well, there is some hope for you after all. Color me surprised.

 

[Joe Shearer]

Did you read the article? It was an Indian firm that imported generic Chinese parts not designed for the Dhanush and then embossed them with "Made in Germany".

It's yet another Made-in-India fraud.



So admit you are stupid. Well, there is some hope for you after all. Color me surprised.

Not surprised: stupid. You forgot your own theme song.

 

[tw00tw00]

Not surprised: stupid. You forgot your own theme song.

Now I know you have the reading comprehension of a bhakt.

 

[Joe Shearer]

Now I know you have the reading comprehension of a bhakt.

Good. With this one point, you can add more, one at a time, until you know three or four things. That would be, for you, progress.

 

[surya kiran]

Good. With this one point, you can add more, one at a time, until you know three or four things. That would be, for you, progress.

When someone comes to a conclusion, that, you Joe are a bhakt, you realise the quality of debate that is happening on this forum. Anyways, have fun. This forum is no longer worth debating, just entertainment.

 

[Joe Shearer]

When someone comes to a conclusion, that, you Joe are a bhakt, you realise the quality of debate that is happening on this forum. Anyways, have fun. This forum is no longer worth debating, just entertainment.

It was never anything but entertainment, for me. There are too many creepy-crawlies coming in nowadays, everyone willing to take a pot-shot, with nothing relevant or useful to say about defence. They are just interested in waving their pricks in the air, saying something that generalises bad qualities to an entire population, or religion, or ethnic grouping. What possible value can there be in engaging with such scumbags, other than entertainment?

And I wouldn't blame the forum; it's individual threads, and, within those, individual members who are causing all the trouble. Better to get rid of them.