Turkish Engine Programs

[UzaySan]

Turkey will produce Blisk Palte section of engines with 5D technology which is designed for next generation engines..

https://twitter.com/x/status/1019830699401056256

I hope we will be able to produce not only engines parts but that complex 5 axis cnc machines.

 

[-------]

I hope we will be able to produce not only engines parts but that complex 5 axis cnc machines.

Baykar Makina uses a Turkish made 5 axis CNC developed especially for them, but I'm sure if such a need arrises such machines can be made for blisks without too much headache.

 

[-SINAN-]

Baykar Makina uses a Turkish made 5 axis CNC developed especially for them, but I'm sure if such a need arrises such machines can be made for blisks without too much headache.

5 Axis CNC working on foam is one thing, 5 Axis CNC working on steel alloys at very narrow tolerances is another thing.

I would very like to see some Turkish company made a CNC like this, but it is not very easy. As my knowledge Japan, Germany and US has that technology and we buy our CNCs from them.

 

[maluus]

... As my knowledge Japan, Germany and US has that technology ...

Which technology?

 

[Kitco]

5 Axis CNC working on foam is one thing, 5 Axis CNC

I would very like to see some Turkish company made a CNC like this, but it is not very easy. As my knowledge Japan, Germany and US has that technology and we buy our CNCs from them.

Well Taiwan has it south korea has it even Turkish companies produce 5 axis cnc mashines like dirinler

 

[Silahtar]

Large size:
https://drive.google.com/drive/folders/1GjKha3xU4g_qFTIlCxtK-YpBbDbi3mKL

 

[Timur]

View attachment 488333

Large size:
https://drive.google.com/drive/folders/1GjKha3xU4g_qFTIlCxtK-YpBbDbi3mKL

yeah tümas made a surprize with that what happened to their engines and transmissions are they being used not only in tümosan vehicles..?

our government should force others (giveng them some benefits too) to use what we already have if it fits our needs!

 

[Kamil_baku]

5 Axis CNC working on foam is one thing, 5 Axis CNC working on steel alloys at very narrow tolerances is another thing.

I would very like to see some Turkish company made a CNC like this, but it is not very easy. As my knowledge Japan, Germany and US has that technology and we buy our CNCs from them.

https://twitter.com/x/status/1022388126533214209

Turkey even produce 6 axis technology..

 

[Oguzbalasi]

https://twitter.com/x/status/1022388126533214209

Turkey even produce 6 axis technology..

No this is not Turkish made. @Sinan is right here, there is no Turkish company that makes such advanced machines.

 

[xenon54 out]

https://twitter.com/x/status/1022388126533214209

Turkey even produce 6 axis technology..

And which company is the producer?

 

[Silahtar]

 

[-SINAN-]

I had searched a bit on google and i found four companies who able to produce 5 axis CNC machines.

http://www.drinns.com.tr/urunler
https://www.igrek.com.tr/tuerkiyenin-5-eksen-isleme-devini-uerettik/
http://www.5dmekatronik.com/tr/urunler/5-eksen-cnc-kalipci/
https://www.robotiksan.com.tr/urunlerimiz

I thought, i was being clear when i said this.

5 Axis CNC working on foam is one thing, 5 Axis CNC working on steel alloys at very narrow tolerances is another thing.

For your knowledge, we also produced as students a 3 axis CNC while we were students in the university, by ourselves. But working on very narrow tolerances on very hard substances like steel alloys is a whole different thing.

If you can show a Turkish made 5 axis CNC which is able to machine steel alloys, i would be very happy.

 

[Bubblegum Crisis]

... If you can show a Turkish made 5 axis CNC which is able to machine steel alloys, i would be very happy.

At the moment, it seems to me there is only that (impressive all the same) - See links -, but I think now that the state has specified its needs and give the way for the defense sector the technique will be mastered in 1 or 2 years.

http://www.hurriyet.com.tr/dirinlerden-yuzde-100-yerli-imza-40313148

http://www.drinns.com.tr/gantry/drinns-dcnc-series-5-axis-gantry-cnc-milling-machine-y9e27

http://www.dirinler.com.tr/Uploads/PDF/624aef.pdf


...

 

[-SINAN-]

For understanding to matter could you make it clear, What is the differences to work on steel alloys ? Why it is impossible to develope here?

Think cutting a wooden plate and an iron plate by yourself. Since iron is more hard and strength, it's harder to cut iron. Similar logic in machining, you need more revs, you need to exert more power, also your tool should be more hard than the material you are cutting (tungsten carbide), you need to remove the heat from the point that you are machining so you apply lubricants simultaneously and do all of these stuff with precision. Working on steel alloy like Inconel is extremely hard since the material is extremely hard.

I'm not saying it is impossible to develop, i'm saying it's very hard to develop.

 

[Kamil_baku]

At the moment, it seems to me there is only that (impressive all the same) - See links -, but I think now that the state has specified its needs and give the way for the defense sector the technique will be mastered in 1 or 2 years.

http://www.hurriyet.com.tr/dirinlerden-yuzde-100-yerli-imza-40313148

http://www.drinns.com.tr/gantry/drinns-dcnc-series-5-axis-gantry-cnc-milling-machine-y9e27

http://www.dirinler.com.tr/Uploads/PDF/624aef.pdf


...

Interesting part it they produced it in 2009.. They probably improved a lot since that..