What's new

The era of EV is coming: some most affordable EVs from Chinese EV makers

This Wuling small EV is a driving coffin. They should add a bit more safety items to it, a more expensive unit but safer would be better. Right now I think a scooter is much safer, you at least have the agility to maneuver.
 
.
This Wuling small EV is a driving coffin. They should add a bit more safety items to it, a more expensive unit but safer would be better. Right now I think a scooter is much safer, you at least have the agility to maneuver.
The Wuling mini EV is actually not meant for expressways, although it can technically get on the expressway occasionally. The main use of this car is as the family's second car for grocery and pick up kids from the school, and for short driving distance to work. It is used mainly to replace the low-speed vehicles and to drive on local roads.
 
.
The Wuling mini EV is actually not meant for expressways, although it can technically get on the expressway occasionally. The main use of this car is as the family's second car for grocery and pick up kids from the school, and for short driving distance to work. It is used mainly to replace the low-speed vehicles and to drive on local roads.
It is a much better coffin on wheel than 9 out of 10 products of Shandong's car industry
 
.
hmm.

NIO's and XPEV's stock just went up 10% and 25% respectively. I should have jumped in last week. And that would have made me enough money to buy a vehicle from them. :)
 
.
It is a much better coffin on wheel than 9 out of 10 products of Shandong's car industry
Is the north and Dongbei infamous in China? Shandong 2013/14-2018 GDP calculations down by almost 1T Yuan. Pretty cool data for Dongbei, not only GDP down, but also below 1.0 TFR.
1606159374170.png


 
.
.
More cost-effective EVs:

Great Wall Ora IQ
Body type: Crossover/SUV
MSRP starts from CNY 114,800 or USD 17,436
Dimension (L*W*H): 4460*1735*1567 mm
Wheelbase length: 2650 mm
NEDC Range: 401 km
SAIC Roewe/MG Ei5
Great Wall Ora IQ
Body type: wagon/estate car
MSRP starts from CNY 128,800 or USD 19,560
Dimension (L*W*H): 4544*1818*1521 mm
Wheelbase length: 2665 mm
NEDC Range: 420-501 km
Geely Emgrand GSe
Body type: Crossover/SUV
MSRP starts from CNY 109,900 or USD 16,690
Dimension (L*W*H): 4440*1830*1560 mm
Wheelbase length: 2700 mm
NEDC Range: 400-450 km
 
Last edited:
.
More cost-effective EVs:

Great Wall Ora IQ
Body type: Crossover/SUV
MSRP starts from CNY 114,800 or USD 17,436
Dimension (L*W*H): 4460*1735*1567 mm
Wheelbase length: 2650 mm
NEDC Range: 401 km
SAIC Roewe/MG Ei5
Great Wall Ora IQ
Body type: wagon/estate car
MSRP starts from CNY 128,800 or USD 19,560
Dimension (L*W*H): 4544*1818*1521 mm
Wheelbase length: 2665 mm
NEDC Range: 420-501 km
Geely Emgrand GSe
Body type: Crossover/SUV
MSRP starts from CNY 109,900 or USD 16,690
Dimension (L*W*H): 4440*1830*1560 mm
Wheelbase length: 2700 mm
NEDC Range: 400-450 km
If given a choice which is your first priority?
 
. .
NETA U:
Body type: Crossover/SUV
MSRP starts from CNY 139,800 or USD 21,243
Dimension (L*W*H): 4530*1860*1628 mm
Wheelbase length: 2770 mm
NEDC Range: 400-500 km
 
.
Besides private cars, taxis and buses are takingg the rapid pace to become fully electrified. Shenzhen has 100% electric bus fleet of 16,359 buses as of 2017:
Shenzhen city alone has over 20,000 electric taxis, accounting for 94.21% of the total number of taxis in the city as of 2019:
The next generation taxis will be this one, co-developed by BYD and Didi:
Other cities are also following this rapid pace.
 
Last edited:
. .
Its not that easy. Most advance EV car maker factory employ very little manpower. More than 80% manufacturing are by robots. Human factor cost very little in the pricing of EV. It got to do with your country infrastructure, industrialisation level and supply chain.


Look at this video and u will understand. See after 1.55mins

It's actually way more advanced than that. Instead of multiple robots stamping and welding parts; a big machine actual creates much of the car frame with just a few huge diecast parts.
 
. .
It's actually way more advanced than that. Instead of multiple robots stamping and welding parts; a big machine actual creates much of the car frame with just a few huge diecast parts.
A die cast a car frame? Are you sure? Maybe works with aluminium/magnesium, but, for steel, strength, and especially tensile strength to weight is usually terrible for thin wall parts.
 
.

Pakistan Defence Latest Posts

Pakistan Affairs Latest Posts

Back
Top Bottom