Major Shaitan Singh
SENIOR MEMBER
- Joined
- Dec 7, 2010
- Messages
- 3,550
- Reaction score
- 43
- Country
- Location
INTRODUCTION
This amazing helicopter is the ultimate example for ‘thinking outside the box’. The designers at Kamov made sure that they built a helicopter which looked weird and clumsy but performed exactly the opposite. The Russian civil and military organizations currently use this helicopter in small numbers and further orders are expected. But what makes this helicopter stand out from the crowd? Let’s find out in this article.
DESIGN
Kamov is known for their trademark co-axial rotor helicopters and almost every helicopter they make follows the same layout of rotors. This arrangement consists of 2 main rotors rotating in opposite directions, driven by a single shaft. The advantages offered by such a design are
The design also has a few disadvantages like increased mechanical complexity in areas like the rotor hub. And due to the presence of a larger number of parts, they are said to be more prone to faults and failure. But Kamov has long perfected the co-axial design and is not affected by these issues. However other helicopter manufacturers which are treading into the co-axial design domain may face these issues.
FEATURES
The Ka-226T has a host of features which are unique to it and separate it from every helicopter of its class.
The detachable cabin module
Ka-226 taking off from snow covered ground
KA-226T IN INDIA
India has a need for 200 light helicopters for its armed forces. There was stiff competition between the Airbus Fennec and the Ka-226T. The Fennec won the tender initially, but the tender was cancelled and re-issued. The Ka-226T won it this time and was decided that 200 helicopters would be procured and most of them would be manufactured locally in India. This order may very well cross 400 as the Indian Army, Navy and Air Force plus their paramilitary will need this helicopter to replace their ageing light transports and to augment their existing fleet. So according to present analysis, the Ka-226T has a brighter future in India than in Russia. So what made this helicopter so attractive to India? I have presented the reasons with analysis in the following points.
The Cheetah helicopter used by India in high altitude regions. Note the tiny amount of space available behind the cockpit to store supplies.
This amazing helicopter is the ultimate example for ‘thinking outside the box’. The designers at Kamov made sure that they built a helicopter which looked weird and clumsy but performed exactly the opposite. The Russian civil and military organizations currently use this helicopter in small numbers and further orders are expected. But what makes this helicopter stand out from the crowd? Let’s find out in this article.
DESIGN
Kamov is known for their trademark co-axial rotor helicopters and almost every helicopter they make follows the same layout of rotors. This arrangement consists of 2 main rotors rotating in opposite directions, driven by a single shaft. The advantages offered by such a design are
- The tail rotor is eliminated and hence complex mechanisms and wiring for it are eliminated.
- The tail can be made shorter as there is no rotor.
- Absence of tail rotor results in significant savings of power because a tail rotor is useful only to stabilize a helicopter which is automatically done by co-axial rotors
- Presence of 2 rotors on the same axis provides greater lift than a single rotor and enables increased payload for the same engine power
- Helicopters using coaxial rotors are generally more compact with a slight increase in overall height. And their compact nature facilitates easy storage especially on ships.
- Co-axial rotors impart exceptional stability while hovering which is very vital during troop insertions and cargo delivery.
The design also has a few disadvantages like increased mechanical complexity in areas like the rotor hub. And due to the presence of a larger number of parts, they are said to be more prone to faults and failure. But Kamov has long perfected the co-axial design and is not affected by these issues. However other helicopter manufacturers which are treading into the co-axial design domain may face these issues.
FEATURES
The Ka-226T has a host of features which are unique to it and separate it from every helicopter of its class.
- The detachable cabin module is unique to many Kamov helicopters and the Ka-226T perfects this design and offers a lot of flexibility in operations. The module can be removed or attached in only 2 hours.
The detachable cabin module
- Every helicopter in this class uses a single engine, whereas the Ka-226T uses twin Turbomecca Arius engines. This makes it safer in case one of the engines fail. The interesting thing here is the use of French engines on a Russian helicopter.
- It has the ability to take-off and land on unprepared sites including sites overgrown with shrubs, grass and covered in snow because of its landing gear design.
Ka-226 taking off from snow covered ground
- One of the most important features of the Ka-226T, which gives it an edge over its competitors, is the practical ceiling of 7300 metres which makes it invaluable in mountainous regions.
- It is capable of operating day and night, in adverse weather conditions, under varying winds and in temperatures ranging from -50° to +50°С.
- The choice of using various cabin modules, allow it to be used for various missions, including cargo & passenger transportation, construction, patrol, medevac, firefighting, search & rescue and evacuation operations. Such flexibility is generally only offered by heavy helicopters.
- The maximum take-off weight of this helicopter is 4 tons. It can carry a 1.5 ton payload or 7 passengers along with 2 pilots.
KA-226T IN INDIA
India has a need for 200 light helicopters for its armed forces. There was stiff competition between the Airbus Fennec and the Ka-226T. The Fennec won the tender initially, but the tender was cancelled and re-issued. The Ka-226T won it this time and was decided that 200 helicopters would be procured and most of them would be manufactured locally in India. This order may very well cross 400 as the Indian Army, Navy and Air Force plus their paramilitary will need this helicopter to replace their ageing light transports and to augment their existing fleet. So according to present analysis, the Ka-226T has a brighter future in India than in Russia. So what made this helicopter so attractive to India? I have presented the reasons with analysis in the following points.
The Cheetah helicopter used by India in high altitude regions. Note the tiny amount of space available behind the cockpit to store supplies.
- India uses a majority of its light helicopter fleet in the harsh and cold environment of the Himalayas. Injuries and illnesses are common among the soldiers deployed at that altitude. To evacuate them, India uses a fleet of Cheetah helicopters which have just enough space for 2 men to sit behind the pilots. This is a big drawback while transporting injured troops who are on stretchers. The Ka-226T solves this problem as its cabin has a rear opening door which allows them to accommodate 2 stretchers side by side. This will be a game changer as the casualties can be evacuated quickly and comfortably from the highest operating regions in the Himalayas.