What's new

Global Auto Makers turn to India for sourcing engines

Chanakya's_Chant

SENIOR MEMBER
Joined
Jul 22, 2013
Messages
3,395
Reaction score
28
Country
India
Location
India
Auto makers like Ford, Renault turn to India for sourcing engines

auto-makers-turn-to-india-for-sourcing-engines.jpg

India, a major base for exporting small cars, is becoming a preferred hub for some global auto makers to develop and source compact engines.
MUMBAI: India, a major base for exporting small cars, is becoming a preferred hub for some global auto makers to develop and source compact engines.

Ford Motor Co, which exports its Figo small car and EcoSport compact sport-utility vehicle from India, plans to source a new generation of small-capacity petrol engines, called Dragon, from its local unit.
Renault SA's research unit in Chennai is developing a 986 cubic centimetre petrol engine, codenamed B4D, in collaboration with the French auto maker's facilities in Brazil and Europe. The B4D will be an enhanced version of a 0.8-litre engine that Renault would use in a car it plans to launch in 2015-16.​

home.jpg


While Ford plans to use India as a base for manufacturing the engines, its French rival is relying on the capability of its Indian research and development base. Both are trying to gain from India's low-budget capabilities.

Auto makers are looking at frugal technologies because of changing customer preference towards lower-priced vehicles. Though sales have been hit by a slowdown in the economy, India is a major market for auto companies who are building new capacities here, especially to manufacture small cars that account for most of the local sales. For these companies, leveraging the manufacturing capacity in India to meet export demand helps keep costs low.

"The cost advantage of India over other markets remains strong, and it (manufacturing in India) is a good 30% more cost effective than a matured base of Europe," said Deepesh Rathore, director of EMMAAA, an automotive research and advisory firm specialising in emerging markets. "There are competent suppliers in India. With volumes getting larger, it is natural for companies to source key modules of cars like engines and transmission from this country."

Ford's Dragon range of engines is likely to be ready by 2016-17, and the US company plans to produce 1.5 million units of the 1.2- and 1.5-litre engines a year globally, a person with knowledge of the matter said. India would be the main supplier with 4 lakh engines a year, and Ford's proposed plant in Gujarat's Sanand would be the lead producer, this person said. "Besides India, the Dragon engine will also be made in China, Europe, Brazil and Russia," the person added.

"We don't comment on speculations related to future programmes or product strategies," a Ford India spokeswoman said in an email response to a request for comment.

Ford has an engine-production capacity of 3.4 lakh units at Chennai and it exports 40% of this output. Once the Sanand plant goes on stream by mid 2015, its capacity will go up to more than 6.1 lakh engines. At Renault, it isn't clear yet whether India will become the main production hub for the new engine. While the Indian R&D facility will play a key development role, the company is still exploring manufacturing bases such as Brazil and Europe apart from India for the best-cost sourcing, people close to the company said.

Renault refused to provide any details. "As company policy, we don't comment on any project development not formally announced by Renault," a spokeswoman said.

Source:- Auto makers like Ford, Renault turn to India for sourcing engines - The Economic Times
 
Which engine TATA uses in its trucks?
 
Tata Motors has an equal joint venture (50:50) with US-based Cummins to manufacture engines for commercial vehicles at its Jamshedpur facility.
Is there any Indian company which manufactures heavy machines like JCB e.t.c.?
 
Is there any Indian company which manufactures heavy machines like JCB e.t.c.?

Yes indeed - Tata Hitachi Construction Machinery Company is an India based joint venture between Tata Motors and HCM, Japan. It has more than half of the market share in the excavator segment. The company offers the largest range of Hydraulic excavators under a single brand in India. It currently has manufacturing plants at Jamshedpur (Jharkhand), Khargapur (West Bengal)and Dharwad (Karnataka).

Telcon has its presence in following products -
 
Thanks for sharing this is what i was looking for.........



Engine Division (Mysore Complex)

BEML Limited, the trusted name for over 40 years in mining and construction industry, channels its expertise into the priority sector of energy with the manufacture of fuel-efficient diesel engines. Established in the year 1991 in Mysore, with technical know-how from Komatsu Japan, BEML diesel engines are built for maximum reliability, high performance and lasting value. These engines are backed by the facility of application engineering, multi location sales & service network and rehabilitation facility.

Engine Division manufactures heavy duty Diesel Engines for application on a wide variety of Earth Moving, Mining and Construction Machinery. Apart from these, the engines are also offered for other industrial applications as well as diesel generator sets. BEML Engines are used on Bull Dozers, Dump Trucks, Motor Graders, Wheel Loaders, Pipe Layers, Hydraulic Excavators, Loading Shovels, C Crane, Aircraft Towing Tractors, Backhoe Loaders, Water Sprinklers, Water Well Rigs and DG sets. These Engines are capable of operations over a wide terrain right from sea level conditions to high altitude (20,000ft) as well as under sub zero conditions.
Engine Series
  • 105 Series - 105 ~ 170 HP
  • 125 Series - 140 ~ 250 HP
  • 140 Series - 300 ~ 400 HP
  • 170 Series - 400 ~ 700 HP
Diesel Generator Set
  • 550,380, 250 & 125 kVA
Salient Features of BEML Engines


  • High Quality
  • Heavy Duty
  • Proven Reliability
  • Economical Operation
  • Longer Life
  • Wide Application
  • Standard Fitment
  • Optional Fitment
Manufacturing Facilities
Manufacturing shop consists of state-of-the-art technology dedicated machines for manufacture of precise engine components like Camshaft, Connecting Rod, Flywheel Housing, Cylinder Head & Cylinder Blocks. Camshaft and Connecting Rod are completely dedicated to manufacture similar type of components with high precision and accuracy requirements.
High Technology Machining Facilities
  • Auto Straightening Press
  • CNC Camshaft Grinding Machine
  • Connecting Rod
  • Cylinder Block
  • Flywheel Housing
  • Oil Cooler Cover & Housing
  • Front Cover
  • Cylinder Head
  • Cylinder Liner
  • Honing
  • Flexible Manufacturing System (FMS)
  • Crank and CAM Bore SPM
  • Valve Seat and Valve Guide Generating Machine
Inspection Technologies
  • ADCOLE Camshaft Inspection Gauge
  • Three Co-ordinate Measuring Machine
Special Processes
  • Shot Peening
Testing Facilities
  • SCHENCK Hydraulic Dynamometer
  • ZOLLNER Hydraulic Dynamometer
  • SAJ FROUDE Hydraulic Dynamometer
Metrology and Gauge Calibration
  • Form Talysurf
  • Form Tester
  • Profile Projector
  • Floating Carriage Micrometer
  • Master Slip Gauges
  • Monochromatic Check Light with Optical Flat
  • Height Master
  • Caliper Checker
  • Depth Micro Checker
  • Dial Calibration Tester
  • Torque Wrench Tester
  • Sine Table
  • Portable Surface Roughness Tester
 

Pakistan Affairs Latest Posts

Back
Top Bottom