What's new

AK-47 expert cleaning guide

smarthief

FULL MEMBER

New Recruit

Joined
Oct 14, 2013
Messages
31
Reaction score
0
Country
Pakistan
Location
Pakistan
I am posting some snaps of AK-47... that are effected by corrosion.... so needs your precious replies and suggestion what to do...... how to rid of this corrosion.... should be dipped in oil :P just saying... kindly please help me in this regard.....
 

Attachments

  • 1402367701843.jpg
    1402367701843.jpg
    14.9 KB · Views: 160
  • 1402367729198.jpg
    1402367729198.jpg
    14.6 KB · Views: 145
  • 1402367729502.jpg
    1402367729502.jpg
    9 KB · Views: 143
  • 1402367729750.jpg
    1402367729750.jpg
    8.3 KB · Views: 153
  • 1402367730251.jpg
    1402367730251.jpg
    9.5 KB · Views: 136
  • 1402367730563.jpg
    1402367730563.jpg
    8.5 KB · Views: 136
  • 1402367730835.jpg
    1402367730835.jpg
    8.5 KB · Views: 136
. . .
I am posting some snaps of AK-47... that are effected by corrosion.... so needs your precious replies and suggestion what to do...... how to rid of this corrosion.... should be dipped in oil :P just saying... kindly please help me in this regard.....

For gas tube scrub with wire brush and clean with Hopps elite cleaning solution, repeat the cycle untill you get all the rust out. Try to space out cleaning across few day's as during cleaning some of the rust might not be clearly visible.

For barrel lug corners use 90-140 grit sand paper crease or a dremel with light hand. once the rust is gone smother with hopps gun grease.

Use dremel to remove rust from the hand guard and lower hand guard, If possible on exterior metal surfaces use cold blue or coat with Hopps gun grease.

Another option would be to duracoat all external metal surfaces. The images are quite small so cant judge the extent of the rust but a barrel change will be highly recommended. Hopefully boltcarier and receiver should be in good condition. .
 
.
AK cleaning manual for retards.....
1-Take your shoe lace
2-Soak it in oil
3-Put it at one end of barrel
4-Swipe the shoe lace through
5-Voila!
 
.
For gas tube scrub with wire brush and clean with Hopps elite cleaning solution, repeat the cycle untill you get all the rust out. Try to space out cleaning across few day's as during cleaning some of the rust might not be clearly visible.

For barrel lug corners use 90-140 grit sand paper crease or a dremel with light hand. once the rust is gone smother with hopps gun grease.

Use dremel to remove rust from the hand guard and lower hand guard, If possible on exterior metal surfaces use cold blue or coat with Hopps gun grease.

Another option would be to duracoat all external metal surfaces. The images are quite small so cant judge the extent of the rust but a barrel change will be highly recommended. Hopefully boltcarier and receiver should be in good condition. .
Thats really helpful, Thanks @sandy_3126

AK cleaning manual for retards.....
1-Take your shoe lace
2-Soak it in oil
3-Put it at one end of barrel
4-Swipe the shoe lace through
5-Voila!
@FunkyGen Thats really awesome but any kind of normal and desi cleaning manual

@sandy_3126 IFF hopps elite and hopps grease is not available ... Can I remove rust from gas tube by oil which I use also for my 9mm and what if local grease is used instead of hopps???
 
. .
Thats really helpful, Thanks @sandy_3126


@FunkyGen Thats really awesome but any kind of normal and desi cleaning manual

@sandy_3126 IFF hopps elite and hopps grease is not available ... Can I remove rust from gas tube by oil which I use also for my 9mm and what if local grease is used instead of hopps???
If you do not find hopps cleaning agent, Use Isopropyl alcohol, that works, if you do not get Hopps gun grease, try to get high temp industrial grease for all areas near the barrel.

A friendly advice is do not use the rifle if you see excessive rust around the barrel. Barrel failures can result in extreme physical injury.
 
.
If you do not find hopps cleaning agent, Use Isopropyl alcohol, that works, if you do not get Hopps gun grease, try to get high temp industrial grease for all areas near the barrel.

A friendly advice is do not use the rifle if you see excessive rust around the barrel. Barrel failures can result in extreme physical injury.
Thanks for suggestions and methods ... that would really help in cleaning... Will update about this to you here... :)
 
.
Back
Top Bottom