UOP SE "Scientific production complex" Iskra " is preparing a new 3D observation radar 80K6T – based on solid-state modules – for the factory trials.
This radar is designed for target destination to the means of air defense and can work with all types of AA missile systems the Armed Forces of Ukraine are armed with. In addition, the powerful radar capabilities allow using it as an information link within the Air Forces units of Ukraine.
The main feature of 80K6T is an active phased array. It allows detecting and tracking targets with super-high accuracy. At the same time, a single station allows simultaneous measurement of target range, azimuth and altitude.
80K6T allows to detect air objects at a distance of up to 500 km, at altitudes of up to 40 km. At the same time, the radar can track up to 500 targets simultaneously. Besides, the radar station can work under a significant counteraction of opponent’s electronic warfare. Due to this 80K6T operators can observe aerial dimension without obstacles,
which is one of the main conditions for the air defense effectiveness.
In one minute, the radar makes up to 12 turns, providing target data update every 5 seconds, and a large viewing area along the corner of the site, up to 70 degrees, allows detecting battlefield support artillery rockets. In addition, a special signal processing system makes it possible to detect small-sized and cruise missiles at low altitudes with terrain following.
In the process of 80K6T development, SPC "Iskra" specialists paid special attention to the mobility of the complex, which consists of two small transport units: one for operators of the radar station and autonomous power generators, and in the second one – for radar equipment. This solution allows 80K6T transportation using light aircraft.
*************
UKROBORONPROM SE “Scientific and Technical Complex “Presicion Mechanics Plant” transferred a new batch of guns to the military units of the Ministry of Defense of Ukraine ahead of the schedule: November 17, therefore the enterprise fulfilled the State Defense Order 2017 significantly ahead of the schedule approved.
In the past 10 months of 2017, the enterprise manufactured 250 guns ZTM1 and ZTM2, as well as about half a million of units of various modifications. Thus, the plant met the requirements of the Ministry of Defense of Ukraine and enterprises of MIC of Ukraine comprehensively.
************
"The ammunition production is a priority issue for the defense industry of Ukraine. We do not copy technology – we improve its quality," said the NSDCU Secretary Oleksandr Turchynov.
UOP representatives informed that 152mm caliber ammunition manufacture is performed using net working capital.
The SC "UkrOboronProm" continues to enhance combat effectiveness of artillery units of the Armed Forces of Ukraine. Over the past three years, UKROBORONPROM transferred 4,000+ WO pieces to the Ukrainian Army, including self-propelled artillery units, MLRS, mortars, anti-tank missile systems, helping our soldiers to defend Ukraine. And now UOP enterprises focus on advanced developments, which will allow bringing Ukrainian artillery to a fundamentally new level.
**************
Missiles and aviation technology, manufactured by SJSHC "Artem," the UGV "Phantom" by SFTE “SpecTechnoExport”, UAV "Spectator," manufactured by OJSC “Meridian” named after S.P. Korolyov, as well as UAVs of other Ukrainian companies were demonstrated to the Danish delegation.
During the talks, the SC “UkrOboronProm” represented the results of its 3-year work from the beginning of the military conflict in the East of the country. For his part, Mr. Jarlov thanked the Ukrainian party for the presentation held and expressed his admiration for the achievements of the Ukrainian defence industry and the way the country’s hybrid war experience is represented in the latest military developments.
**************
During the sea trainings, Marines along with representatives of the BTR-4 developer Kharkiv Morozov Machine Building Design Bureau and supplier SFTE "Spetstechnoexport", have been conducting a special trainings to improve Marines practice of BTR-4 afloat maneuvering during high-waves.
Right afterward, at firing ground the crew of each BTR-4M hit successfully all targets at specified distances from a 30mm automatic gun ZTM-1 and 7.76mm machine gun PKT, that was quite a good showcase of accuracy rate of Ukrainian weapons. The Marine Corps Deputy Commander, who observed the trainings, was frankly impressed by the efficiency of the modern digital sighting and firing control system.
five BTR-4M have successfully passed all trial tests, participated in a 100-kilometer march in mountainous terrains. Following the results of those tests, a Protocol on performing functional tests was signed. The special committee of the Ministry of Defence of Indonesia has confirmed, that BTR-4M comply with all evaluation specifications of the Protocol and APC’s were accepted into operation by the Marine Corps.
The BTR-4M has 8×8 wheel arrangement and is equipped with turbocharged 6-cylinder 11.9 liter Deutz diesel engine, that allows to develop 515 horsepower output at maximum 1800 rpm.
Two Indonesian BTR-4M are equipped with uninhabited combat turret BM-7 “Parus” with a 30-mm automatic gun ZTM-1, 30 mm grenade launcher and 7,76 mm automatic gun, “Barrier” antitank guided missile system. Other three machines have a combat turret with a 7,76mm automatic gun.
It’s a basic armored vehicle for equipping marine units and quick-reaction forces, fulfilling day-and–night missions under various climate conditions (operating temperature range from -40 up to +55 C), off-road, on hard-surface and in the sea.