safari2021
BANNED
- Joined
- Feb 8, 2021
- Messages
- 367
- Reaction score
- -10
- Country
- Location
Larson & Toubro (L&T) bags the contract for procurement and fabrication of 28 steel bridges for the Bullet train. The contract of award value of Rs 1390 crore has been awarded to Larson & Toubro –IHI Infrastructure Systems (Consortium). This is a consortium of Indian and Japanese companies.
It is estimated that about 70,000 MT of steel will be used for the fabrication of these steel bridges and Indian Steel industries and their allied supply chains will get a big boost.
National High Speed Rail Corporation Limited (NHSRCL) has awarded contract for procurement and fabrication of 28 steel bridges (Superstructure) for crossing over railway lines, rivers, highways, roads, and other structures (P-4 Package) for the Mumbai Ahmedabad High-Speed Rail Corridor, today.
Indian steel manufactures will be providing quality steel for the fabrication of superstructures for these steel bridges. NHSRCL has already sensitized the Indian steel industries to cater to such a huge demand for India's first High-Speed Rail corridor.
NHSRCL has already been awarded civil contracts for the construction of 64 per cent of MAHSR alignment which includes five (5) HSR stations (Vapi, Billimora, Surat, Bharuch, Anand/Nadiad, Train depot at Surat, and One Mountain Tunnel of 350 metres.
Mumbai-Ahmedabad bullet train project: L&T lowest bidder for 28 steel bridges
Out of the total length of 508 km, a maximum stretch of the Mumbai Ahmedabad High-Speed Rail (MAHSR) will be covered by the viaduct, which excludes the 21 km long tunnel near Mumbai. The MAHSR alignment over viaduct (487km) will span over National Highways, Dedicated Freight Corridor Tracks (DFC), Indian Railways Tracks, and rivers at many locations. Most of the viaduct is being made of concrete (PSC box, Girder). However, where the span requirement will be more than 60 metres, steel superstructures have been planned, as beyond a point PSC structures become heavy and steel superstructures are considered to be more viable and efficient.
Decision to include the fabrication of steel bridges by Indian companies
In total, 28 steel bridges with individual spans varying from 60 metres to 130 metres will be constructed for the project. The length of all the steel bridges put together will be approximately 4.5 km and their construction would involve more than 70,000 tons of steel fabrication. For this purpose, at the initial stages, the steel superstructure work was assigned to Japan Lead (JV) Companies, as the job required the construction of steel superstructures bridges of high-quality Japanese standards for high-speed railway. But as the 'Make in India' prospect took flight and as fabrication of steel structures are being executed by Indian companies for all other railway projects, NHSRCL took a keen interest in the possibility of opening steel structure fabrication bid to Indian companies as well.
On discussion with the Japanese side for opening the steel superstructure works to Indian companies also, a High-Power Committee comprising of experts from both Indian and Japanese side, namely NHSRCL, India Experts, and JRTT was formed in March 2019. The main task of the committee was to assess the capability of various Indian fabricators and ensure whether they can be entrusted with the said work. The committee was also tasked with the responsibility of recommending the required improvements to the Indian fabricators so that their fabrication quality is levelled with Japanese and global HSR standards.
For few months, the committee visited various factories in India to assess their capabilities and interacted with some reputed fabricators regarding their infrastructure facility, quality control systems, the skills of their manpower, and previous experience in Railway steel bridge fabrication. In addition to all this, the committee also visited steel fabrication facilities in Japan in October 2019.
It is estimated that about 70,000 MT of steel will be used for the fabrication of these steel bridges and Indian Steel industries and their allied supply chains will get a big boost.
National High Speed Rail Corporation Limited (NHSRCL) has awarded contract for procurement and fabrication of 28 steel bridges (Superstructure) for crossing over railway lines, rivers, highways, roads, and other structures (P-4 Package) for the Mumbai Ahmedabad High-Speed Rail Corridor, today.
Indian steel manufactures will be providing quality steel for the fabrication of superstructures for these steel bridges. NHSRCL has already sensitized the Indian steel industries to cater to such a huge demand for India's first High-Speed Rail corridor.
NHSRCL has already been awarded civil contracts for the construction of 64 per cent of MAHSR alignment which includes five (5) HSR stations (Vapi, Billimora, Surat, Bharuch, Anand/Nadiad, Train depot at Surat, and One Mountain Tunnel of 350 metres.
Mumbai-Ahmedabad bullet train project: L&T lowest bidder for 28 steel bridges
Out of the total length of 508 km, a maximum stretch of the Mumbai Ahmedabad High-Speed Rail (MAHSR) will be covered by the viaduct, which excludes the 21 km long tunnel near Mumbai. The MAHSR alignment over viaduct (487km) will span over National Highways, Dedicated Freight Corridor Tracks (DFC), Indian Railways Tracks, and rivers at many locations. Most of the viaduct is being made of concrete (PSC box, Girder). However, where the span requirement will be more than 60 metres, steel superstructures have been planned, as beyond a point PSC structures become heavy and steel superstructures are considered to be more viable and efficient.
Decision to include the fabrication of steel bridges by Indian companies
In total, 28 steel bridges with individual spans varying from 60 metres to 130 metres will be constructed for the project. The length of all the steel bridges put together will be approximately 4.5 km and their construction would involve more than 70,000 tons of steel fabrication. For this purpose, at the initial stages, the steel superstructure work was assigned to Japan Lead (JV) Companies, as the job required the construction of steel superstructures bridges of high-quality Japanese standards for high-speed railway. But as the 'Make in India' prospect took flight and as fabrication of steel structures are being executed by Indian companies for all other railway projects, NHSRCL took a keen interest in the possibility of opening steel structure fabrication bid to Indian companies as well.
On discussion with the Japanese side for opening the steel superstructure works to Indian companies also, a High-Power Committee comprising of experts from both Indian and Japanese side, namely NHSRCL, India Experts, and JRTT was formed in March 2019. The main task of the committee was to assess the capability of various Indian fabricators and ensure whether they can be entrusted with the said work. The committee was also tasked with the responsibility of recommending the required improvements to the Indian fabricators so that their fabrication quality is levelled with Japanese and global HSR standards.
For few months, the committee visited various factories in India to assess their capabilities and interacted with some reputed fabricators regarding their infrastructure facility, quality control systems, the skills of their manpower, and previous experience in Railway steel bridge fabrication. In addition to all this, the committee also visited steel fabrication facilities in Japan in October 2019.
