What's new

Egypt Close to Buying ThyssenKrupp MEKO A200 Frigates

The SC

ELITE MEMBER
Joined
Feb 13, 2012
Messages
32,233
Reaction score
21
Country
Canada
Location
Canada
meko_1535976762.jpg

MEKO A-200 Frigate


ThyssenKrupp Marine Systems (TKMS), is close to winning a contract for two corvettes in Egypt a deal in which France’s Naval Group was also a contender.

Negotiations between Egypt and Germany-based ThyssenKrupp Marine Systems are close to completion for a purchase of two MEKO A200 corvettes, French and Egyptian media reported.

Discussions are reportedly on about the equipment to be installed on the two Meko A200 corvettes and their financing, the reports said adding that if the TKMS deal is clinched, then the chance of selling two additional Gowind 2500 corvettes would considerably diminish.

France’s Naval Group has sold four Gowind 2500 ships to Egypt in 2014 and was in the race for two more. Incidentally, Cairo is expected to launch the first of three Gowind 2500 corvettes built locally by Alexandria Shipyard on Thursday.

French publication LATribune commented: The sale of the two Meko A200 (3,400 tons DWT) remains very intriguing. They are twice as expensive as the two Gowind 2500 (1 billion euros excluding armament, against 500 million for the two French corvettes). In addition, this project will bring no benefit for the Egyptian industry. The two German corvettes are to be built in Kiel at Germany.

According to TKMS information, the MEKO A-200 contains innovative propulsion, stealth and survivability design, robust sea keeping and helicopter operability. This frigate features the CODAG-WARP (water jet and refined propellers) propulsion system: two CPP propeller shafts driven by cross-connectable diesel engines plus a center-line, gas turbine-driven water jet, combining the power of each drive in the water with no need for a combining gearbox.

This arrangement allows for extremely quiet acoustic signatures, a high degree of propulsion redundancy, and damage survivability. In the diesel-only mode this propulsion arrangement is also an extremely economic solution, as a single engine can drive both shafts for speeds of up to 18 knots.


http://www.defenseworld.net/news/23...ThyssenKrupp_MEKO_A200_corvettes#.W41i8rgpBdh

40606992_1638243106288152_3954897347485368320_o.jpg
 
Last edited:
These are Figates..not corvettes..

MEKO 200 Frigate
849x493q70Thamm-terry-crawford-brown-documents.jpg


The MEKO A combat ships, designed by Blohm and Voss, evolved from the MEKO family of ships which have been in operation with navies around the world since the 1980s.

The MEKO A family includes the 1,650t MEKO A-100 multi-purpose corvette and the 3,500t MEKO A-200 frigate. Improvements include increased payload share of ship displacement, stealthy design, advanced propulsion system and combat systems with modular open architecture.

South African Valour Class MEKO A-200 anti-air frigates
Four Valour Class MEKO A-200 anti-air frigates have been delivered to the South African Navy.

A group of South African companies, known as the SA Corvette Group, including Altech Defence Systems, Kentron, LIW Division of Denel, Futuristic Business Solutions, Saab Avitronics, Grintek Electronics, Reutech and African Defence Systems (a joint venture company between Altech and Thales), is responsible for combining the weapons and electronics subsystems into a fully integrated combat suite.

"The four Valour Class MEKO A-200 anti-air frigates are for the South African Navy."
Two of the vessels were built by Blohm & Voss at Hamburg, and the other two by HDW at Kiel.

The first, the SAS Amatola, was delivered to the South African Navy by Blohm and Voss in September 2003 and arrived in Simonstown (the vessels’ home port) in November 2003. The SAS Amatola was commissioned in February 2006. The second ship, SAS Isandlwana, was handed over by HDW in December 2003 and commissioned in July 2006.

The third vessel, SAS Spioenkop, was handed over in September 2003 and commissioned in February 2007. The fourth ship, SAS Mendi, was handed over in June 2004 and commissioned in March 2007. The South African Navy confirmed the intention to procure a fifth vessel of the class and a contract award was expected in 2009. However, the navy later shelved its plans to buy the fifth vessel.

The four Valour Class MEKO A-200 anti-air frigates for the South African Navy are equipped with African Defence Systems’ Combat Management System and Navigation Subsystem. ADS will also act as the Segment Manager for the corvette’s underwater systems including the sonars and torpedoes.

The ship’s integrated Seacom communications system is based on dual redundant high-speed fibre-optic networks and a modular hardware and software architecture. It is supplied by Grintek Electronics Systems based in Tokai, South Africa.

MEKO A Class stealth design features
Stealth design features have been introduced to reduce the radar cross-section. Hull panels are alternately angled to avoid large flat surfaces, an arrangement called ‘X-form’. Right angle corners are avoided and the decks and superstructure have been decluttered. The bridge wings present on the original MEKO have been eliminated and the bridge is completely enclosed.

"The frigates have one spot for a medium-sized helicopter."
A reduction of about 75% on the ship’s infrared signature has been achieved by elimination of the funnel, and instead hot exhaust gases are ducted through a horizontal system.

Seawater is injected into the exhaust duct to cool the exhaust fumes, before being expelled just above the waterline.

Valour Class frigate missiles and guns
The frigate is equipped with two four-cell launchers for MBDA MM 40 Exocet surface-to-surface missiles. The anti-ship sea-skimming missile has a range of 70km and uses inertial guidance for the cruise phase of the trajectory and then active radar homing.

Two eight-cell vertical 16 Umkhonto surface-to-air missiles are fitted. Umkhonto, developed by the Kentron division of Denel based in Centurion, South Africa, has a range of up to 12km. The missile uses an infra-red homing seeker with inertial mid-course guidance. The 23kg warhead is fitted with an active proximity fuse.

The frigate is armed with a 35DPG 35mm dual purpose gun from LIW division of Denel, Pretoria. A dual antenna Doppler radar, combined with high speed digital signal processing of the muzzle velocity measurement provide compensating feedback to the Fire Control Computer. Firing one burst of 25 rounds, cruise missiles are destroyed at ranges of at least 2.5km and high speed missiles at range 1.5km.

Aircraft
The frigates have one spot for a medium-sized helicopter. The South African Navy accepted four AgustaWestland SuperLynx 300 helicopters for deployment on the Valour Class vessels in February 2008.

Electro-optical tracker
The frigate is equipped with the RTS 6400 naval optronic and radar tracking system developed by Reutech Systems, Stellenbosch, South Africa. The X-band (I/J bands) radar detection range is more than 25km against fighter targets and more than 16km against missile targets in poor weather.

The dual-band thermal imaging sensor operates in 3-5 and 8-12 micron wavebands. The system incorporates an eyesafe laser range finder.

Countermeasures
Saab Avitronics Maritime Division is supplying the electronic warfare suite which includes radar warning receivers and intercept systems, jamming systems and decoys.

The frigate’s Rocket Decoy System (RDS), developed by Grintek, Tokai, South Africa, consists of up to four rocket launchers interfaced to a single controller, integrated with the ship’s electronic warfare suite. The launcher accommodates up to 48 rockets.

Propulsion system
The propulsion system is based on a CODAG-WARP (Combined Diesel and Gas – Water Jet and Refined Propeller) configuration. Two MTU 16V 1163 TB 93 diesel engines (5,920kW each) drive controllable pitch propellers and a single GE LM 2500 20,000kW gas turbine acts on a waterjet propulser system, providing a maximum speed of more than 27kt.

Malaysian Kedah Class MEKO A-100 corvettes
The Malaysian Navy has ordered six Kedah Class MEKO A-100 corvettes. The first two (KD Kedah and KD Pahang) have been built in Germany and assembled in Malaysia. The first two ships were delivered to the PSC Naval Dockyard, Malaysia for final outfitting and sea trials in 2003. The first vessel, KD Kedah (F171), was handed over to the RMN in April 2006 and was commissioned in June 2006. KD Pahang (F172) was commissioned in August 2006. Subsequent vessels are being built by BN Shipyards, Malaysia.

KD Perak (F173) was launched in November 2007 and commissioned in June 2009. KD Terengganu (F174) was launched in December 2007 and KD Kelantan (F175) was launched in November 2008. The sixth and final ship, KD Selangor (F176), was launched in July 2009.

The first of five new K130 corvettes (based on the MEKO A) for the German Navy began building in July 2004. The first and the fourth corvette are to be built by Blohm & Voss, the second and fifth by Lürssen and the third by Thyssen Nordseewerke. The first, F260 Braunschweig, was commissioned in April 2008 and the second, F261 Magdeburg, was commissioned in September 2008.

The Malaysian Kedah Class MEKO A-100 patrol vessel has a displacement of 1,650t. The propulsion system is based on two Caterpillar 3616 (5,450kW) diesel engines each driving two controllable pitch propellers. CAE of Canada is to provide the integrated platform management system (IPMS) that will monitor and control propulsion, electrical and auxiliary systems.

Kedah Class corvette aircraft and weapons
The corvettes have one helicopter spot for a helicopter such as AgustaWestland Super Lynx 300 or Sikorsky S-70B Seahawk. Initially, the vessels will be armed with an Oto Melara 76/62 Rapid medium-range gun and an Oto Melara / Mauser 30mm short-range gun, but provision is made for the later addition of one RAM (rolling airframe missile) RIM-116A launcher for air defence and two launchers for the MM40 Exocet anti-ship missile.

The four existing 76mm Oto Melara guns have been transferred from South African Navy OPVs to the corvettes. Reutech Systems (Pty) Ltd has developed a new generation electric gun drive system and these will be fitted to the guns in place of the previous hydraulic system.

Combat management system
The vessel’s combat management system will be the Atlas Elektronik COSYS-110M1 with a TMEO electro-optic fire director from Oerlikon Contraves.

The main surveillance radar will be the TRS-3D/16 ES three-dimensional radar from EADS Deutschland. The vessels will also be equipped with MDS 3060 obstacle avoidance sonar and ALEX chaff / decoy launching system. Other systems have yet to be decided.

MEKO 100 Corvette
TKMS_MEKO_A-100_PL_Energy_Saving_Hull_MSPO_2015_2.jpg


https://www.naval-technology.com/projects/meko/
 
Last edited:
A pair of these will be a good addition to the FREMM. Too bad they couldn't work out a deal for at least one more FREMM and these two here. This deal is almost certain to go through with the price and the 100% financing the TKMS is offering.

"The frigates have one spot for a medium-sized helicopter."
A reduction of about 75% on the ship’s infrared signature has been achieved by elimination of the funnel, and instead hot exhaust gases are ducted through a horizontal system.

So these will be better than the Algerian MEKOs. We'll have to see if they can work out a deal for the Umkhonto IIR short-range S2A missile. The South African route and particularly with Denel -- is very interesting. And the ironic part, in some ways, is that if they do agree to these ships, they'll be built alongside the Israeli Sa'ar 6. My, how times have changed

Propulsion system
The propulsion system is based on a CODAG-WARP (Combined Diesel and Gas – Water Jet and Refined Propeller) configuration. Two MTU 16V 1163 TB 93 diesel engines (5,920kW each) drive controllable pitch propellers and a single GE LM 2500 20,000kW gas turbine acts on a waterjet propulser system, providing a maximum speed of more than 27kt.

Awesome. Doesn't get any better than that propulsion system. I have a inboard/outboard sterndrive with duoprops on my bowrider. :D
 
A pair of these will be a good addition to the FREMM. Too bad they couldn't work out a deal for at least one more FREMM and these two here. This deal is almost certain to go through with the price and the 100% financing the TKMS is offering.



So these will be better than the Algerian MEKOs. We'll have to see if they can work out a deal for the Umkhonto IIR short-range S2A missile. The South African route and particularly with Denel -- is very interesting. And the ironic part, in some ways, is that if they do agree to these ships, they'll be built alongside the Israeli Sa'ar 6. My, how times have changed



Awesome. Doesn't get any better than that propulsion system. I have a inboard/outboard sterndrive with duoprops on my bowrider. :D
It will be hard to beat the Algerian Mekos..they have 32 VLS cells for Umkhonto, plus 16 RBS-15 Mk-3 missiles! The Algerian deal also includes 6 Agusta Westland Super Lynx helicopters to carry the MU-90 torpedoes and Mokopa missiles..As well as many special tailor-made features..I believe that Egypt will also have its own version..better than the Gwend in the field of air defense and will be integrated with it in the rest of the tasks while the coverage range will be greater..

ACTAS.jpg


ASW+tactics.jpg


atlas8_SeaSpider.jpg
 
Last edited:
Sisi making sure that egypt never get on its feet it should live under jew debt so they never stand against his jew master
 
Sisi making sure that egypt never get on its feet it should live under jew debt so they never stand against his jew master

To the contrary.. He is making sure Egypt gets on its feet and quite strongly..
Why do i suspect some jealousy!!?
Actually Egypt is buying from Germany or France..where do you see Jews?:lol:, not one cent will be paid for these chips untill they are delivered..count 4-5 years..and then in installments..
Egypt only buys what it can pay for .. no excess
 
More business for TATA Steel.


Go-ahead given for merger of Tata Steel and Thyssenkrupp

Synergies expected as German and Indian firms combine their European operations
Reuters in Cologne
Sat 30 Jun 2018 09.43 BSTFirst published on Sat 30 Jun 2018 00.05 BST
This article is over 2 months old


Coils are stored on trains in front of the ThyssenKrupp steel mill in Duisburg, Germany. Photograph: Lukas Schulze/Getty Images
The German steel company Thyssenkrupp has agreed a merger of its European operations with Indian-owned Tata Steel.

The deal signed on Friday will mean the European steel sector’s biggest shake-up since the takeover of Arcelor by Mittal in 2006.

The new 50-50 joint venture – to be named Thyssenkrupp Tata Steel – will have about 48,000 workers and about €15bn (£13bn) in sales.

Based in the Netherlands, it will be the continent’s second biggest steelmaker after ArcelorMittal and forms the core of Thyssenkrupp CEO Heinrich Hiesinger’s plan to turn the steel-to-submarines conglomerate into a technology company.

“The joint venture with Tata Steel is an important milestone for the transformation of Thyssenkrupp to an industrials and service group and will lead to a significant improvement of the financial figures of Thyssenkrupp, effective with closing,” the group said in a statement. The definite agreement would be signed shortly, it added.

The move followed a memorandum of understanding signed by the two sides in September.

The Tata Steel chairman, Natarajan Chandrasekaran, said: “The joint venture will create a strong pan-European steel company that is structurally robust and competitive.

“This is a significant milestone for Tata Steel and we remain fully committed to the long-term interest of the joint venture company. We are confident that this company will create value for all stakeholders.”

Roy Rickhuss, the general secretary of the Community union, said steelworkers had fought hard to secure the future of British steel-making.

“As part of this joint venture, we have secured significant investment across Tata Steel’s UK business, including a repair of Port Talbot’s blast furnace number five, which could see it produce steel until at least 2026,” he said.

“With a commitment to avoid compulsory redundancies until October 2026, and the first £200m of any operating profit being invested back in the business, this joint venture has the potential to safeguards jobs and steel-making for a generation.”

The Unite union’s national officer, Tony Brady, said: “Tata Steel’s UK workforce is world-class and has worked tirelessly under a cloud of uncertainty to keep steel-making alive in the UK.

“Those steelworkers have made great sacrifices in working to secure a future for Tata Steel. We will be seeking guarantees over jobs and investment for the UK operations of the joint venture to secure the future of UK steel.”

Dr Heinrich Hiesinger, the chief executive of Thyssenkrupp, said : “We will create a highly competitive European steel player based on a strong industrial logic and strategic rationale.

“We will secure jobs and contribute to maintaining value chains in European core industries.”

The deal comes as European steelmakers face stiff tariffs of 25% on their exports to the US, their biggest market, fuelling fears the local market might be forced to absorb more volume as a result.

Since tariffs were announced in late May, shares in European steelmakers ArcelorMittal, Thyssenkrupp, Salzgitter and Voestalpine have lost 8% to 17%.

Hiesinger had faced pressure from activist shareholders Cevian Capital and Elliott Advisors to extract more commitments from Tata Steel, whose European business performed worse than Thyssen’s since the deal was first announced in September, thus creating a valuation gap.

Thyssenkrupp said that in case of an initial public offering of the joint venture, which is widely expected by investors and has been flagged by both companies, it would get a bigger share of the proceeds “reflecting an economic ratio of 55-45”.

The German group also said it expected annual synergies of €400m-500m from the transaction, having previously communicated a maximum of €600m.

Markus Grolms, the vice-chair of Thyssenkrupp’s supervisory board, said Tata Steel would continue to remain liable for environmental risks in Britain, where its Port Talbot factory, the least profitable of the joint venture, is based.

He said Tata’s Dutch unit would be part of the joint venture’s cash-pooling mechanism, which had been a key demand for German workers concerned that Tata would give its own workers better conditions in the new company.

“Yes, we do want to protect people. But we also want a company with better chances and less risks,” Grolms said.

https://www.theguardian.com/busines...ven-for-merger-of-tata-steel-and-thyssenkrupp
 

Latest posts

Pakistan Affairs Latest Posts

Back
Top Bottom