SRP
BANNED
- Joined
- Apr 9, 2013
- Messages
- 2,460
- Reaction score
- -4
- Country
- Location
PSLV-C28 / DMC3 Mission
The Polar Satellite Launch Vehicle (PSLV), in its thirtieth flight (PSLV-C28), will launch three identical DMC3 optical earth observation satellites built by Surrey Satellite Technology Limited (SSTL), United Kingdom (UK). The three DMC3 satellites, each weighing 447 kg, will be launched into a 647 km Sun-Synchronous Orbit (SSO) using the high-end version of PSLV (PSLV-XL) from Satish Dhawan Space Centre, Sriharikota (SDSC-SHAR), the spaceport of India. PSLV-C28 will be the ninth flight of PSLV in ‘XL’ configuration.
The PSLV-C28, in addition to the three DMC3 satellites, will also carry two auxiliary satellites from UK, viz., CBNT-1, a technology demonstrator earth observation micro satellite built by SSTL, and De-OrbitSail, a technology demonstrator nano satellite built by Surrey Space Centre.
With the overall lift-off mass of the five satellites amounting to about 1440 kg, this mission becomes the heaviest commercial mission ever undertaken by Antrix/ISRO.
Accommodating the three DMC3 satellites each with a height of about 3 metre within the existing payload fairing of PSLV, was a challenge. To mount these satellites onto the launcher, a circular Launcher adaptor called as L-adaptor and a triangular deck called Multiple Satellite Adapter-Version 2 (MSA-V2), were newly designed and realized by ISRO for this specific purpose.
These international customer satellites are being launched as part of the arrangement entered into between DMC International Imaging (DMCii), a wholly owned subsidiary of SSTL, UK; and Antrix Corporation Limited (Antrix), the commercial arm of Indian Space Research Organisation (ISRO), a Government of India Company under Department of Space.
DMC3
The DMC3 constellation, comprising of three advanced mini-satellites DMC3-1, DMC3-2 and DMC3-3, is designed to address the need for simultaneous high spatial resolution and high temporal resolution optical Earth Observation. Launched into a single Low-Earth Orbit plane and phased with a separation of 120° between them, these satellites can image any target on the Earth’s surface every day. Major application areas include surveying the resources on earth and its environment, managing urban infrastructure and monitoring of disasters.
CBNT-1, weighing 91 kg, is an optical Earth Observation technology demonstration micro satellite built by SSTL. The 7 kg De-orbitSail from Surrey Space Centre, is an experimental nano satellite for demonstration of large thin membrane sail and drag deorbiting using this sail.
Integration of third and fourth stage of PSLV-C28 in progress
Integration of PSLV-C28 Second Stage in progress at Mobile Service Tower
PSLV-C28 Strap-Ons are being assembled with Core Stage at Mobile Service Tower
Integration of one of the DMC3 satellites in progress
CBNT-1 (left) and three DMC3 Satellites (right) in the cleanroom at SDSC SHAR
DeOrbitSail undergoing pre-launch tests
CBNT-1 undergoing pre-launch tests
Source: ISRO
PSLV-C28 / DMC3 Mission - ISRO
The Polar Satellite Launch Vehicle (PSLV), in its thirtieth flight (PSLV-C28), will launch three identical DMC3 optical earth observation satellites built by Surrey Satellite Technology Limited (SSTL), United Kingdom (UK). The three DMC3 satellites, each weighing 447 kg, will be launched into a 647 km Sun-Synchronous Orbit (SSO) using the high-end version of PSLV (PSLV-XL) from Satish Dhawan Space Centre, Sriharikota (SDSC-SHAR), the spaceport of India. PSLV-C28 will be the ninth flight of PSLV in ‘XL’ configuration.
The PSLV-C28, in addition to the three DMC3 satellites, will also carry two auxiliary satellites from UK, viz., CBNT-1, a technology demonstrator earth observation micro satellite built by SSTL, and De-OrbitSail, a technology demonstrator nano satellite built by Surrey Space Centre.
With the overall lift-off mass of the five satellites amounting to about 1440 kg, this mission becomes the heaviest commercial mission ever undertaken by Antrix/ISRO.
Accommodating the three DMC3 satellites each with a height of about 3 metre within the existing payload fairing of PSLV, was a challenge. To mount these satellites onto the launcher, a circular Launcher adaptor called as L-adaptor and a triangular deck called Multiple Satellite Adapter-Version 2 (MSA-V2), were newly designed and realized by ISRO for this specific purpose.
These international customer satellites are being launched as part of the arrangement entered into between DMC International Imaging (DMCii), a wholly owned subsidiary of SSTL, UK; and Antrix Corporation Limited (Antrix), the commercial arm of Indian Space Research Organisation (ISRO), a Government of India Company under Department of Space.
DMC3
The DMC3 constellation, comprising of three advanced mini-satellites DMC3-1, DMC3-2 and DMC3-3, is designed to address the need for simultaneous high spatial resolution and high temporal resolution optical Earth Observation. Launched into a single Low-Earth Orbit plane and phased with a separation of 120° between them, these satellites can image any target on the Earth’s surface every day. Major application areas include surveying the resources on earth and its environment, managing urban infrastructure and monitoring of disasters.
CBNT-1, weighing 91 kg, is an optical Earth Observation technology demonstration micro satellite built by SSTL. The 7 kg De-orbitSail from Surrey Space Centre, is an experimental nano satellite for demonstration of large thin membrane sail and drag deorbiting using this sail.
Integration of third and fourth stage of PSLV-C28 in progress
Integration of PSLV-C28 Second Stage in progress at Mobile Service Tower
PSLV-C28 Strap-Ons are being assembled with Core Stage at Mobile Service Tower
Integration of one of the DMC3 satellites in progress
CBNT-1 (left) and three DMC3 Satellites (right) in the cleanroom at SDSC SHAR
DeOrbitSail undergoing pre-launch tests
CBNT-1 undergoing pre-launch tests
Source: ISRO
PSLV-C28 / DMC3 Mission - ISRO
