LUH’s Main Coupling Jig Commissioned : HAL

[Water Car Engineer]

HAL in its In House Magazine have informed that LUH Main Coupling Jig was Commissioned on November 24,2012 . The jig has been designed by HAL using 3D CAD data and fabricated by TATA Automation Ltd., Pune. The coupling jig has been built and validated using state of the art CAMS -Computer Aided Measurement System (Laser Tracker) to establish high accuracy and stability reducing the time required for jig setting.

The LUH structural assembly is being realised with modular concept. All the sub-assemblies are being assembled separately which are then assembled together on the coupling jig to realize the LUH structure. This concept has reduced the cycle time for structural build up considerably.

Shri P. Soundara Rajan, Managing Director (Helicopter Complex), Shri M.S. Srinath, Executive Director (Helicopter Complex),
Dr. M. Vijayakumar, Officiating General Manager (RWRDC), other dignitaries and Officers of RWRDC were present on the
occasion.

LUH’s Main Coupling Jig Commissioned : HAL | idrw.org

Cheers guys.

 

[karan21]

Kya baat kya baat kya baat. Party hoo jaye aaj toh.

 

[Gessler]

Pretty quick the CAMS and 3D CAD-assisted design & building is turning out to be.

At this rate, the first full-fledged LUH prototype would be flying by end of 2013.

 

[veekysingh]

waiting for this baby to fly in tricolor.

 

[Water Car Engineer]

 

[BlueDot_in_Space]

HAL needs to start work on medium weight helicopter.

 

[karan21]

Nice hopefully most of the components of this machine are made in India.

 

[Water Car Engineer]