What's new

KSA and South Korea unite in solar energy.

Bubblegum Crisis

SENIOR MEMBER
Joined
Feb 4, 2012
Messages
2,612
Reaction score
5
Country
Saudi Arabia
Location
United Arab Emirates
SR1.43bn deal for solar cell manufacturing plant



Polysilicon Technology Co. Executive Director and CEO Ibrahim Al-Humaidan, center, with Hyundai Engineering Co. and KCC Engineering & Construction Corp. executives at the signing ceremony in Alkhobar on Sunday.


By SIRAJ WAHAB
Published: Feb 28, 2011 22:00


ALKHOBAR: A contract to set up a polysilicon plant in Jubail to manufacture solar-energy cell material was signed on Sunday in Alkhobar.

Polysilicon Technology Co. (PST) entered into an engineering, procurement and construction contract to cover Phase 1 of the plant with Hyundai Engineering Co. and KCC Engineering and Construction Corp.

The lump-sum, turn-key agreement is valued at SR1.43 billion ($380 million).

Polysilicon is the main raw material used in the solar industry which is then converted into ingot, wafers and then into solar cells that are put into panels in order to generate electricity from the sun.

The initial plant, located in Jubail II, will produce 3,350 metric tons of solar grade polysilicon annually with future plans for expansion.

PST is a joint venture between Mutajadedah Energy Co. (MEC) of Saudi Arabia and KCC Corp. of Korea (KCC). KCC brings it global experience with construction and polysilicon production to the partnership.

MEC is a local company owned by Swicorp Joussour Co. (SJC) and Chemical Development Co. (CDC) incorporated to invest across the solar energy value chain in Saudi Arabia.

“Over the past few years, the solar industry has gone through major consolidation and optimization which has led to a huge reduction in costs allowing the industry to see continued growth bringing it closer to grid parity with conventional sources of power,” said PST Executive Director and CEO Ibrahim Al-Humaidan.

“The polysilicon project in Jubail is only our first step. PTC intends to expand the plant to an annual capacity of 12,000 metric tons as well as continue further downstream into the manufacturing of ingots and wafers.”

Speaking to Arab News on the sidelines of the signing ceremony was former Saudi Arabian General Investment Authority (SAGIA), Gov. Prince Abdullah bin Faisal bin Turki.

“The signing of this project is a fantastic opportunity to put Saudi Arabia at the heart of the solar energy development,” Prince Abdullah said.

“The success of this project will be a very strong indicator for international companies to do business in Saudi Arabia in this field.”

He said this new direction in Saudi manufacturing brings with it many opportunities.

“My message to the Saudi private sector would be to look to the future and develop viable projects that are in sync with the local market and ones that add value to our raw materials and help develop human resources,” Prince Abdullah said, noting that the project was aligned with the Kingdom’s long-term energy plans.

“Saudi oil will always remain our most important product, but what is even more important is to see where the world is heading. The whole world is going ahead and developing solar technology,” he said.

“There is no reason why one cannot develop other sources of energy. It is keeping this in view that the government created the King Abdullah City for Atomic and Renewable Energy.”

MEC Executive Director Faysal Hamza said alternative energy is a new area of interest in the Middle East, which has gained recent attention due to the pressing need for economies to look toward diversified energy sources for future generations. “Harnessing diversified sources of energy is critical to the development of tomorrow’s economies. We are proud to be involved in launching, with our partners, the first plant of its kind, creating a nucleus for the solar industry in Saudi Arabia,” he added.




Saudia Arabia and South Korea Join Forces for Solar Power



BY Jenara Nerenberg
Mon Feb 28, 2011


The $380 million deal indicates a commitment to clean energy--and to regional collaboration.

Saudi Arabia and South Korea are ramping up their alternative energy production--and working together in the process. The two nations have united,as the Polysilicon Technology Company (PTC) has contracted South Korea's Hyundai Engineering and KCC Engineering and Construction Corporation to build a polysilicon plant on Saudi Arabia's Gulf Coast, enabling production of 3,350 metric tons of polysilicon, a material that turns sunlight into electricity.

As peak oil looms, Saudi Arabia has started to focus on alternative energy sources--earlier this month the country announced plans for its largest « solar park » ever and shortly after that it announced plans to request funds from the UN’s $100 billion climate change fund. Simultaneously, South Korea--in an attempt to "green" the country and reduce pollution-- announced $7.18 billion in energy improvements leading to a full-blown smart grid.

“KCC is a very strong partner with tremendous technical and R&D capabilities and have great interests in investing in the kingdom," said Walid Al-Shoaibi, chairman of the Saudi partner of the PTC, the Saudi Mutajadedah Energy Company (MEC). "They have existing polysilicon plants operating in Korea which will allow them to add significant value to the execution and operation of the project ensuring its success and timely start up.”

The project is scheduled to be complete by 2017 and could cost up to $1.5 billion. The two countries plan to to expand their collaboration in the future.

“The Polysilicon Project in Jubail is only our first step. PTC intends to expand the plant to an annual capacity of 12,000 metric tonnes as well as continue further downstream into the manufacturing of Ingot and Wafers” said Ibrahim Al-Humaidan, CEO of PTC.

Such collaborations may make Western leaders slightly uncomfortable, however, as a commitment to clean energy and engaging regional partners signals a step toward greater independence from the West.





 
Last edited by a moderator:
SolFocus and Vision Electro Mechanical Company to Build the Largest Solar Power Plant of its Kind in Saudi Arabia

October 25, 2010 11 :58 AM

Project is milestone for the commercialization of concentrator photovoltaic (CPV) technology in the Middle East

BAHRA, Saudi Arabia & MOUNTAIN VIEW, Calif.--(BUSINESS WIRE)--SolFocus, the leading developer of Concentrator Photovoltaic (CPV) solar systems, today announced that Vision Electro Mechanical Company, a subsidiary of Construction Products Holding Company (CPC), will build the first commercial solar power plant in Saudi Arabia using CPV systems. These SolFocus CPV systems combine high-efficiency solar cells with advanced optics to provide scalable, reliable solutions capable of delivering low-cost renewable power. The project, located in the Bahra region, will deliver around 300MWh of clean energy per year and is the first in a series of Saudi power stations planned by Vision.

“The high sun conditions of the Middle East provide an ideal environment for reaping large-scale, low-cost solar energy from CPV systems,” said Mark Crowley, chief executive officer, SolFocus. “Together with our partners at Vision, SolFocus will bring the world’s most efficient and resource-friendly solar technology to Saudi Arabia, providing energy diversification for the country.”

Vision will market and install the SolFocus solar power systems, starting with this plant in CPC’s Bahra industrial complex. Vision will install other solar power stations in Saudi Arabia, as well as in the research centers of King Abdullah University of Science and Technology (KAUST).

“We accomplished this partnership in line with Saudi’s efforts to promote investment in renewable energy projects and serve power projects in the Gulf and the wider Arabian region,” said Hassan Chahine, general manager, Vision. “This is a breakthrough in Saudi Arabia’s thrust for energy diversification. We believe the Bahra plant will serve as a model for the further research and study of clean water and power solutions that diversify the region’s energy mix.”

“It is a testament to SolFocus that its technology was selected by project developers with such deep expertise in energy generation innovation,” added Crowley. “We view SolFocus CPV as a critical component of the bold clean energy goals set forth by leaders in the Middle East, such as CPC/Vision in Saudi Arabia and the developers of Masdar City in Abu Dhabi.”

The news is the latest in a string of groundbreaking developments for SolFocus; earlier this month it was the first CPV company to announce a power warranty backed by Munich Re; in May it announced completion of the largest CPV installation in North America; and in 2009 it was the first CPV firm to secure International Electrotechnical Commission (IEC) certification for performance and safety.


About SolFocus

The SolFocus mission is to enable solar energy generation at a Levelized Cost of Energy (LCOE) competitive with traditional fossil fuel sources. To achieve this goal, SolFocus has developed leading concentrator photovoltaic (CPV) technology which combines high-efficiency solar cells (approaching 40 percent) and advanced optics to provide solar energy solutions which are scalable, dependable and capable of delivering on the promise of clean, low-cost, renewable energy. SolFocus is headquartered in Mountain View, California with European operations headquartered in Madrid, Spain, and manufacturing in Mesa, Arizona and manufacturing partners in China.


About Advanced Vision Electro Mechanical Company

Established in 2007 in Bahra, Saudi Arabia, Advanced Vision is a major electro mechanical contracting company serving the construction industry.

It was established to meet increased market demand for large electro mechanical projects that require complete engineering and construction services. A subsidiary of Saudi-based Construction Products Holding Company (CPC), It has formed a solar company to develop, manufacture and operate solar power plants in Saudi Arabia.


About Construction Products Holding Company

Construction Products Holding Company (CPC) is a dynamic and reputable entity possessing a wealth of global experience in construction products.

CPC was established in 2005 as the industrial arm in the field of building materials manufacturing for Saudi Binladin Group (SBG), implementing the “one stop shop” concept for providing construction materials to contractors and developers. From India to the shores of the Atlantic Ocean, CPC is stretching its company’s projects and partnerships to form an integrated system of specialized industries and support for building materials and construction, taking advantage of clear urban renaissance experienced by Saudi Arabia.


 
Last edited by a moderator:
Back
Top Bottom