New Taurus G3 (Taurus USA) Taurus USA have announced the introduction of a new full-size pistol, t

[Zarvan]

New Taurus G3 (Taurus USA)

Taurus USA have announced the introduction of a new full-size pistol, the latest entry into their G-series of pistols, the G3. Chambered in 9x19mm it feeds from 10, 15 or 17 round magazines, has a frame-mounted manual safety, weighs in at 25 oz. and has an MSRPs of $345.23.

New Taurus G3 (Taurus USA)

New Taurus G3 (Taurus USA)

HERE’S TAURUS’ PRESS RELEASE ABOUT THE G3 IN FULL:
Taurus®, a leading innovator in handgun technology for personal defense, hunting, and competition, is excited to announce the release of their first full-size G-series pistol. The new G3 9mm semi-auto represents the next generation in the Taurus G-series polymer-frame handguns.

For the last several years, the Taurus G2c pistols have been among the most popular everyday carry 9mm handguns due to their ergonomic design, reliable performance, ease-of-operation, and class-leading cost-to-performance ratio. Since the G2c series debut, consumers and dealers have been asking for a 4-inch barrel version of this innovative pistol. Those calls have now been answered with the release of the new Taurus G3.

The G3 continues the proven polymer-frame profile of the G2c but in a full-frame configuration. Highlights include generous stippling patches across the grip for maximum control and retention in any shooting condition, an ergonomic palm swell and side-frame Memory Pads that provide quick, positive, and repeatable hand positioning. The frame also incorporates an integrated Picatinny rail. A manual safetyand slide release lever are optimally positioned above the thumb for easy manipulation.

Another refined element of the G3 is the 6-lb. trigger. It is designed with a smooth take-up and a surprisingly crisp, clean break exceeding that of typical striker-fired pistoltrigger performance. A short reset promotes quick, controlled follow-up shots. Unlike most single-action firing systems, the G3 offers second-strike capability.

Although full-frame in size, the G3’s profile makes it well-suited for concealed carry. Uniform beveling along the front of the slide and frame combined with a steep contoured bevel along the back of the slide minimize clothing snags. Generous front and rear machined serrations along the slide ensure a no-slip grip for cartridge chambering and slide manipulation. Additional slide features include a drift-adjustable rear sight, steel guide rod and spring assembly, and the choice of carbon steel or stainless-steel finish.

The Taurus G3 comes in six different models, offering consumer options in slide finish and magazine capacities (two 10-round mags, two 15-round mans, or one 15- and one 17-round mag), with MSRPs of $345.23 or $360.70, depending on the model configuration.

(Taurus USA)

TAURUS G3 SPECIFICATIONS

• Caliber: 9mm Luger
• Capacity: 10, 15, or 17 (with extended magazine)
• Finish: Matte Black / Matte Stainless
• Grip/Frame: Polymer
• Firing System: Single Action with Restrike Capability
• Action Type: Striker
• Safety: Manual and Trigger Safety, Striker Block
• Sights Front: Fixed (White Dot)
• Sights Rear: Drift Adjustable (White Dots)
• Slide Material: Carbon Steel, Stainless Steel
• Slide Finish: Matte Black / Matte Stainless
• Overall Length: 7.30″
• Overall Width: 1.25″
• Overall Height: 5.20″
• Barrel Length: 4.00″
• Weight: 25 oz. (unloaded)
• Magazines Included: 2×10, 2×15, or 1×15 and 1×17
• Packaging Size: 12.5″ x 6″ x 1.75″
• Packaging Weight: 2.75 lbs.
• Additional Feature: Picatinny Rail (Mil-STD 1913)

For more information on the new Taurus G3 at TaurusUSA.com.

Matthew Moss
Matthew Moss – Assistant Editor.

Matt is a British historian specialising in small arms development and military history. He has written for a variety of publications in both the US and UK he also runs www.historicalfirearms.info, a blog that explores the history, development and use of firearms. Matt is also co-founder of www.armourersbench.com, a new video series on historically significant small arms.

Reach Matt at: matt@thefirearmblog.com

https://www.thefirearmblog.com/blog/2019/09/04/taurus-introduces-the-g3-polymer-9mm-pistol/

 

[denel]

Very good; reminds me of CZ100 - but i still am old school polymers are not my thing.

Taurus does a superb job always; i have 35yr old 38 spec. going strong still.

 

[313ghazi]

Whats the little thing sticking out of the trigger?

 

[Fawadqasim1]

Very good; reminds me of CZ100 - but i still am old school polymers are not my thing.

Taurus does a superb job always; i have 35yr old 38 spec. going strong still.

I too

Whats the little thing sticking out of the trigger?

trigger safety haven't you seen glocks

 

[denel]

I too


trigger safety haven't you seen glocks

i love Taurus. My baby is CZ-75; for my call up duty it is Vector 9m. Here CZ is king. Vector too is just excellent. Never let me down.

https://modernfirearms.net/en/handg...-semi-automatic-pistols/vektor-sp1-i-sp2-eng/

 

[Fawadqasim1]

i love Taurus. My baby is CZ-75; for my call up duty it is Vector 9m. Here CZ is king. Vector too is just excellent. Never let me down.

https://modernfirearms.net/en/handg...-semi-automatic-pistols/vektor-sp1-i-sp2-eng/

C75 is the best and one of the most accurate and reliable designs in the world
of 9mms but I personally like sig sauer p226 x5 it's just a subjective choice.

 

[denel]

C75 is the best and one of the most accurate and reliable designs in the world
of 9mms but I personally like sig sauer p226 x5 it's just a subjective choice.

Yes here Sig was never available due to sanctions; we had our own Vectors plus CZ and Taurus. All excellent choices

 

[Fawadqasim1]

i bought norinco np22 just to quill the itch.

 

[313ghazi]

I too


trigger safety haven't you seen glocks

No i haven't.

I've held and fired an AK, but never a pistol...lol

 

[denel]

i bought norinco np22 just to just to quill the itch.

Here we are seeing a lot of Norinco's floating around now; but a lot of cleanup is required. my pal in lichtenburg has setup his sideline business to polish and redo the Norinco knock offs of CZs.

THe machining and alloy is also really bad. Lot of burrs; plus grips are horrible. In many cases he is replacing parts of the firing mechanism including redoing trigger to bring performance overall

 

[Fawadqasim1]

Here we are seeing a lot of Norinco's floating around now; but a lot of cleanup is required. my pal in lichtenburg has setup his sideline business to polish and redo the Norinco knock offs of CZs.

THe machining and alloy is also really bad. Lot of burrs; plus grips are horrible. In many cases he is replacing parts of the firing mechanism including redoing trigger to bring performance overall

i have fired more than 1200 rounds mostly local with it with just two ftfs and i found it fairly accurate too so.

 

[denel]

i have fired more than 1200 rounds mostly local with it with just two ftfs and i found it fairly accurate too so.

yes. np22 is more cleaner - NZ75 and 1911 clones are terrible.

i have fired more than 1200 rounds mostly local with it with just two ftfs and i found it fairly accurate too so.

I still have my grand father's Lee Enfield 1948 - No4 MK2. in perfect condition.

 

[Selous]

i love Taurus. My baby is CZ-75; for my call up duty it is Vector 9m. Here CZ is king. Vector too is just excellent. Never let me down.

https://modernfirearms.net/en/handg...-semi-automatic-pistols/vektor-sp1-i-sp2-eng/

It could be just me but the Vector is not very accurate. I did my competency on one and compared to a CZ or Glock it was a bit finicky. Your opinion ?

 

[denel]

It could be just me but the Vector is not very accurate. I did my competency on one and compared to a CZ or Glock it was a bit finicky. Your opinion ?

Which Vektor did you use? We use normally SP1 in SANDF and there are 2 submodels - one which is slightly shorter.
I find it similar; including accuracy. Vector is a bit heavier and harder to squeeze which could be throwing off your aim and that is deliberate; it follows same from Beretta 92.

 

[Selous]

Which Vektor did you use? We use normally SP1 in SANDF and there are 2 submodels - one which is slightly shorter.
I find it similar; including accuracy. Vector is a bit heavier and harder to squeeze which could be throwing off your aim and that is deliberate; it follows same from Beretta 92.

It was the SP1. Yup the trigger was a bit different. Longer and stiffer pull.