Haq's Musings: Pakistan Joins 3D Printing Revolution
3D printing technology was introduced in Pakistan when Robotics Lab was launched in 2011 in Karachi. It was founded by two friends Afaque Ahmed and Yasin Altaf who had previously worked in Silicon Valley. They bought a 3D printer for the lab as a tool to help children learn science.
In addition to serving children, the Robotics Lab has attracted commercial clients such asPak Suzuki Motors, architecture firms and college students doing senior projects, according to the Express Tribune newspaper. The founding duo is now looking for ways to expand its audience.“Our goal is to push this science lab to TCF schools, a nationwide school network covering about 150,000 underprivileged students,” says Ahmed. The project, however, is currently pending because of funding constraints. “We have asked them to find some big donor for this purpose. Currently, we train these children only through field trips to our labs.”
3D printing has excited Pakistanis like Ali Ahsan to build his own 3D printer, according to a story published inPakistan Today. He was inspired to make things by his father. “My father was a ‘maker’. He always enjoyed problem solving wanted to make life easier. We never saw electricians, plumbers, carpenter coming to our house. He use to do everything by himself and fortunately as a kid I always stood beside him carrying tools and watching what he is doing. That’s what made me a mechanical engineer, a little different as I was pre-trained by a full time mentor. “It was a favour that I wanted to return by doing something similar for my own children. With 3D printing, I can’t tell you the exact moment it all started, but my wife and I spared a room (we call it the Maker Room) with all sorts of tools electronics. And that’s sort of where it all began! The first thing we made were LEGOs for my children and we ended up at LEGO Mindstorm. With an environment of learning you actually don’t have to teach they learn by mimicking you".
Softonix, a Karachi-based creative design agency, started a commercial 3D printing service to offer 3D models to their clients starting in 2012. As the popularity of 3D printing grew among the users of the service, Tayyab Alam told 3DPrint.com that “seven out of ten calls asked us for 3D printers instead of the 3D printing service.” Softonix responded to growing demand by launching 3D Xplore subsidiary to sell 3D printers.
"So we started working on the plans to design and manufacture Pakistan’s very own 3D printer brand, and finally we launched [our line of] 3D Printers for consumers, back in March 2014,” said Alam. “Xplorer 3D is Pakistran’s first 3D printing brand, providing state of the art and affordable 3D Printers. Currently our printers are being manufactured in China and assembled in Pakistan, but we do have future plans to start manufacturing them right here. Currently our product range starts from DIY 3D printing kits to professional level 3D printers.”
3D printing technology has the potential to revolutionize manufacturing. It can be used for 3D model-making, rapid prototyping and production of a range of products for industrial and consumer applications as well as prosthetic limbs and human organs. CAD files for such products can be created by designers from scratch for new designs or downloaded from the web and modified and customized.
Here's Lisa Harouni on 3D Printing:
Haq's Musings: Pakistan Joins 3D Printing Revolution
3D printing technology was introduced in Pakistan when Robotics Lab was launched in 2011 in Karachi. It was founded by two friends Afaque Ahmed and Yasin Altaf who had previously worked in Silicon Valley. They bought a 3D printer for the lab as a tool to help children learn science.
In addition to serving children, the Robotics Lab has attracted commercial clients such asPak Suzuki Motors, architecture firms and college students doing senior projects, according to the Express Tribune newspaper. The founding duo is now looking for ways to expand its audience.“Our goal is to push this science lab to TCF schools, a nationwide school network covering about 150,000 underprivileged students,” says Ahmed. The project, however, is currently pending because of funding constraints. “We have asked them to find some big donor for this purpose. Currently, we train these children only through field trips to our labs.”
3D printing has excited Pakistanis like Ali Ahsan to build his own 3D printer, according to a story published inPakistan Today. He was inspired to make things by his father. “My father was a ‘maker’. He always enjoyed problem solving wanted to make life easier. We never saw electricians, plumbers, carpenter coming to our house. He use to do everything by himself and fortunately as a kid I always stood beside him carrying tools and watching what he is doing. That’s what made me a mechanical engineer, a little different as I was pre-trained by a full time mentor. “It was a favour that I wanted to return by doing something similar for my own children. With 3D printing, I can’t tell you the exact moment it all started, but my wife and I spared a room (we call it the Maker Room) with all sorts of tools electronics. And that’s sort of where it all began! The first thing we made were LEGOs for my children and we ended up at LEGO Mindstorm. With an environment of learning you actually don’t have to teach they learn by mimicking you".
Softonix, a Karachi-based creative design agency, started a commercial 3D printing service to offer 3D models to their clients starting in 2012. As the popularity of 3D printing grew among the users of the service, Tayyab Alam told 3DPrint.com that “seven out of ten calls asked us for 3D printers instead of the 3D printing service.” Softonix responded to growing demand by launching 3D Xplore subsidiary to sell 3D printers.
"So we started working on the plans to design and manufacture Pakistan’s very own 3D printer brand, and finally we launched [our line of] 3D Printers for consumers, back in March 2014,” said Alam. “Xplorer 3D is Pakistran’s first 3D printing brand, providing state of the art and affordable 3D Printers. Currently our printers are being manufactured in China and assembled in Pakistan, but we do have future plans to start manufacturing them right here. Currently our product range starts from DIY 3D printing kits to professional level 3D printers.”
3D printing technology has the potential to revolutionize manufacturing. It can be used for 3D model-making, rapid prototyping and production of a range of products for industrial and consumer applications as well as prosthetic limbs and human organs. CAD files for such products can be created by designers from scratch for new designs or downloaded from the web and modified and customized.
Here's Lisa Harouni on 3D Printing:
Haq's Musings: Pakistan Joins 3D Printing Revolution
