What's new

Nuclear fusion breakthrough: US scientists make crucial step to limitless power

Rangila

SENIOR MEMBER
Joined
Feb 20, 2013
Messages
2,211
Reaction score
-2
Country
Venezuela, Bolivarian Republic Of
Location
Argentina
fusion-energy-power-ignition.si.jpg


Nuclear fusion breakthrough: US scientists make crucial step to limitless power — RT USA

A team of scientists in California announced Wednesday they are one step closer to developing the almost mythical pollution-free, controlled fusion-energy reaction, though the goal of full “ignition” is still far off.

Researchers at the federally-funded Lawrence Livermore National Laboratory revealed in a study released Wednesday in the peer-reviewed journal Nature that, for the first time, one of their experiments has yielded more energy out of fusion than was used in the fuel that created the reaction.

In a 10-story building the size of three football fields, the Livermore scientists “used 192 lasers to compress a pellet of fuel and generate a reaction in which more energy came out of the fuel core than went into it,” wrote the Washington Post. “Ignition” would mean more energy was produced than was used in the entire process.

"We're closer than anyone's gotten before," said Omar Hurricane, a physicist at Livermore and lead author of the study. "It does show there's promise."

The process ultimately mimics the processes in the core of a star inside the laboratory’s hardware. Nuclear fusion, which is how the sun is heated, creates energy when atomic nuclei fuse and form a larger atom.

"This isn't like building a bridge," Hurricane told USA Today in an interview. "This is an exceedingly hard problem. You're basically trying to produce a star, on a small scale, here on Earth."

A fusion reactor would operate on a common form of hydrogen found in sea water and create minimal nuclear waste while not being nearly as volatile as a traditional nuclear-fission reactor. Fission, used in nuclear power plants, works by splitting atoms.

Hurricane said he does not know how long it will take to reach that point, where fusion is a viable energy source.

"Picture yourself halfway up a mountain, but the mountain is covered in clouds," he told reporters on a conference call Wednesday. “And then someone calls you on your satellite phone and asks you, ‘How long is it going to take you to climb to the top of the mountain?’ You just don’t know.”

The beams of the 192 lasers Livermore used can pinpoint extreme amounts of energy in billionth-of-a-second pulses on any target. Hurricane said the energy produced by the process was about twice the amount that was in the fuel of the plastic-capsule target. Though the amount of energy yielded equaled only around 1 percent of energy delivered by the lasers to the capsule to ignite the process.

“When briefly compressed by the laser pulses, the isotopes fused, generating new particles and heating up the fuel further and generating still more nuclear reactions, particles and heat,” wrote the Washington Post, adding that the feedback mechanism is known as “alpha heating.”

Debbie Callahan, co-author of the study, said the capsule had to be compressed 35 times to start the reaction, “akin to compressing a basketball to the size of a pea,” according to USA Today.

While applauding the Livermore team’s findings, fusion experts added researchers have “a factor of about 100 to go.”

"These results are still a long way from ignition, but they represent a significant step forward in fusion research," said Mark Herrmann of the Sandia National Laboratories' Pulsed Power Sciences Center."Achieving pressures this large, even for vanishingly short times, is no easy task."

Livermore is the site of the multi-billion-dollar National Ignition Facility, funded by the National Nuclear Security Administration. Fusion experiments aren’t the only function of the lab; for example, it also studies the processes of nuclear weapon explosions.

Long-pursued by scientists dating back to Albert Einstein, fusion energy does not emit greenhouse gases or leave behind radioactive waste. Since the 1940s, researchers have employed magnetic fields to contain high-temperature hydrogen fuel. Laser use began in the 1970s.

"We have waited 60 years to get close to controlled fusion," said, Steve Cowley, of the United Kingdom's Culham Center for Fusion Energy. He added scientists are "now close" with both magnets and lasers."We must keep at it."

Stewart Prager - director of the Princeton Plasma Physics Laboratory, which studies fusion using magnets - told the Post he was optimistic about fusion energy’s future.

“In 30 years, we’ll have electricity on the grid produced by fusion energy – absolutely,” Prager said. “I think the open questions now are how complicated a system will it be, how expensive it will be, how economically attractive it will be.”
 
“In 30 years, we’ll have electricity on the grid produced by fusion energy – absolutely,” Prager said. “I think the open questions now are how complicated a system will it be, how expensive it will be, how economically attractive it will be.”
30 years! :woot: I would be dead and gone by then! Sheeesh! :cray:

But what's new in this? The ITER fusion reactor is already being built.

ITER (International Thermonuclear Experimental Reactor) an international nuclear fusion research and engineering project, is currently building the world's largest experimental Nuclear fusion reactor in the south of France.

The ITER fusion reactor itself has been designed to produce 500 megawatts of output power. The machine is expected to demonstrate the principle of producing more energy from the fusion process than is used to initiate it, something that has not yet been achieved in any fusion reactor. Construction of the ITER facility began in 2007, is expected to finish its construction phase in 2019 with a fusion burn expected by 2030, about 15 years from now.

130311171124-iter-fusion-power-horizontal-gallery.jpg


The ITER fusion facility being built in southern France. Scientists like Steven Cowley, director of the UK's Culham Center for Fusion Energy, think that research at ITER (pictured) could result in abundant, low-carbon energy in the future.


The ITER project aims to make the long-awaited transition from experimental studies of plasma physics to full-scale electricity-producing fusion power plants. The project is funded and run by seven member entities — the EU, India, Japan, China, Russia, South Korea and the US of A.
 
US is the first to have achieved such positive result. while the ITER is no where..
 
US is the first to have achieved such positive result. while the ITER is no where..

I am pretty sure US' first laser based Q>1 experiment was last September, done by NIF.
Chinese has also achieved Q>1 experiment in 2010, but using the super conducting Tokamak setup instead.

I remember this because I had a huge fight with someone on PDF about the issue, where the individual insisted that ITER was ahead of both US and China.
 
30 years! :woot: I would be dead and gone by then! Sheeesh! :cray:

But what's new in this? The ITER fusion reactor is already being built.

ITER (International Thermonuclear Experimental Reactor) an international nuclear fusion research and engineering project, is currently building the world's largest experimental Nuclear fusion reactor in the south of France.

The ITER fusion reactor itself has been designed to produce 500 megawatts of output power. The machine is expected to demonstrate the principle of producing more energy from the fusion process than is used to initiate it, something that has not yet been achieved in any fusion reactor. Construction of the ITER facility began in 2007, is expected to finish its construction phase in 2019 with a fusion burn expected by 2030, about 15 years from now.

130311171124-iter-fusion-power-horizontal-gallery.jpg

The ITER fusion facility being built in southern France. Scientists like Steven Cowley, director of the UK's Culham Center for Fusion Energy, think that research at ITER (pictured) could result in abundant, low-carbon energy in the future.

The ITER project aims to make the long-awaited transition from experimental studies of plasma physics to full-scale electricity-producing fusion power plants. The project is funded and run by seven member entities — the EU, India, Japan, China, Russia, South Korea and the US of A.


The new thing about the news is that the first time Laser based Nuclear fusion has shown to produce more energy that was invested in first place to kick start fusion process .

Lot of methods are being researched !

till date we do not have single commercially viable Nuclear fusion technology .

To be applicable for large scale utilization the technology must be safe , sound as well as economically viable .

Nuclear fusion will be the single most game changing technology of 22'nd century if realized .

Every news in that direction needs to be greeted with great anticipation.

we have long way to go to achieve that .

I think it's a great news ...

we need multifaceted, multi prong approach .

ITER is not enough . ITER is experimenting on Tokamak based approach - one of the many approaches proposed .


Given the immense promise that this technology holds many countries are holding parallel research projects despite their ongoing participation in ITER . No body wants to be left behind when technology actually arrives in domains of practical reality !!!
 
I am pretty sure US' first laser based Q>1 experiment was last September, done by NIF.
Chinese has also achieved Q>1 experiment in 2010, but using the super conducting Tokamak setup instead.

You must have missed the part where it says only 1% of lasers' energy reaches the hydrogen. So, if they get return of that 1% plus a little bit more, it's still not viable.

As for Chinese, one of your coworkers linked once a supposed research document in Chinese claiming what you claim here. Upon translation i realized the guy has no clue what he was talking about, and the claim was bogus, the paper talked about energy confinement if i recall correctly and not yield. So, please, link some.
 
JEW USA loves attracting all the brains with fake news

Their inventions are made by immigrants, they just steal the elite of all countries

The US freemassons don't deserve we work for them. Once the inventions are made they just take control of that and attack everyone.
 
JEW USA loves attracting all the brains with fake news

Their inventions are made by immigrants, they just steal the elite of all countries

The US freemassons don't deserve we work for them. Once the inventions are made they just take control of that and attack everyone.

I wonder who this could be?
 
The new thing about the news is that the first time Laser based Nuclear fusion has shown to produce more energy that was invested in first place to kick start fusion process .

Lot of methods are being researched !

till date we do not have single commercially viable Nuclear fusion technology .

To be applicable for large scale utilization the technology must be safe , sound as well as economically viable .

Nuclear fusion will be the single most game changing technology of 22'nd century if realized .

Every news in that direction needs to be greeted with great anticipation.

we have long way to go to achieve that .

I think it's a great news ...

we need multifaceted, multi prong approach .

ITER is not enough . ITER is experimenting on Tokamak based approach - one of the many approaches proposed .


Given the immense promise that this technology holds many countries are holding parallel research projects despite their ongoing participation in ITER . No body wants to be left behind when technology actually arrives in domains of practical reality !!!

While this is certainly a good news for experimenter's point of view, but it is pretty much taken for granted that a functional fusion reactor could be based on tokamak design only since it is the only design out of those currently available which could be scaled-up to commercial level.

A reactor which would try to confine nuclear fusion using radiation pressure would face problems once size of pellets increase while a tokamak design could be easily modify to deal with larger volume of plasma.
 
While this is certainly a good news for experimenter's point of view, but it is pretty much taken for granted that a functional fusion reactor could be based on tokamak design only since it is the only design out of those currently available which could be scaled-up to commercial level.

A reactor which would try to confine nuclear fusion using radiation pressure would face problems once size of pellets increase while a tokamak design could be easily modify to deal with larger volume of plasma.

That's why I posted the FORA Tv video ...which basically shows interview with head of National Ignition Facility .

It's not clear yet if Tokamak based design can only be scaled up to commercial level . This is still very much wide open question and after US success in instigating Nuclear fusion with Lasers many other countries have initiated laser based Nuclear fusion experiments .

I would say both Tokamak as well Laser based nuclear fusion are in race ...and jury is not out still as to who wins ...

Given the amazing implications for whole world and implications to mankind's survival that hinges upon steady sustainable source of eco friendly energy ...the Nuclear fusion remains the best bet !

what has happened that after 6 decades of research first time Lasers have shown to be able to initiate nuclear fusion but it was not sustained . NIF is working on to make nuclear fusion sustained ...once that key step is achieved ...rest is all engineering stuff .

NIF head is jubilious because first time we have come very close to realize the dream ....


Scaling up to commercial reactor ...is just matter of engineering once the underlying physics is settled.

Watch that Fora TV video ...it's long but very informative .
 
Back
Top Bottom