• Monday, September 24, 2018

It’s finally here! The B&T APC308 Carbine and DMR

Discussion in 'Equipment & Gear' started by Zarvan, Mar 8, 2018.

  1. Zarvan

    Zarvan ELITE MEMBER

    Messages:
    45,540
    Joined:
    Apr 28, 2011
    Ratings:
    +81 / 45,170 / -13
    Country:
    Pakistan
    Location:
    Pakistan
    [​IMG]
    Finally the B&T APC family is complete. There has been a lot of rumors about the APC308 and it was expected to be released at SHOT Show, but was nowhere to be found there.

    Instead it is released today at Enforce TAC 2018, Germany, closer to its birthplace in Thun, Switzerland.

    B&T are releasing not only one, but two versions: One in a Carbine version and a 13″ barrel and a DMR version with a 18,9″ barrel.

    With the introduction of the APC308 you can now source a B&T APC firearm with identical controls and ergonomics in all major calibers from 9×19 mm, .45 ACP to 5,56x45mm/.223 Remington, 300 Blackout/300 Whisper and up to 7,62x51mm/.308 Winchester.

    I am assuming that one of B&T’s target is to be able to offer this product family to Special Police units, Special Forces and other smaller LEAF groups. Perhaps the they are aiming even higher than that?

    Users will appreciate that the magwell accepts Magpul SR25/M110/AR10 magazines. I’m glad B&T didn’t invent the wheel again with a magazine of their own. The pistol grip is also made by Magpul.

    [​IMG]
    APC308 Carbine and Aimpoint CompM5

    THE BASIC SPECIFICATIONS FOR BOTH THE APC308 AND DMR ARE:
    • Chambered in 7.62 x 51 mm (.308 Win)
    • 100% ambidextrous controls
    • Hydraulic buffer for light recoil
    • Five different stock options
    • Semi-automatic only



    Both versions are also suppressor ready for the ROTEX-IIA, with a selector switch on the gas block.

    As a European I use a B&T suppressor for both hunting and long range precision shooting (very comfortable) and it’s been nothing but excellent so far.


    BELOW YOU CAN FIND THE PRESS RELEASE FROM B&T:
    B&T has developed what many say is our finest work. The weapon possesses all the same handling characteristic and controls as all other members of the APC-family. This will reduce transition training time to any of the other APC platforms significantly. But this will not only save time, money, energy and of course needless stress in the classroom or on the range, but also in the armory. As more than 50% of the parts throughout the APC family are the same, logistic cost are cut significantly as well as service time and costs.

    The selector, magazine release, bolt handle, and bolt release are completely ambidextrous. The bolt handle can easily be changed to accommodate either left or right handed shooters. The standard stock folds to the right and can be fi red in the closed position. The operator can optimize the weapon to any mission by being able to choose any of the fi ve different stock options available.
    The upper receiver is machined from solid aerospace quality alloy. The Picatinny/NAR rails in the 12 and 6 o’clock position are machined into the receiver and are not an add on, so there is nothing to get loose and ruin the weapon’s zero. The top rail runs along the entire receiver of the weapon. This provides 420 mm of space to mount any type of optic plus additional NVD, Thermal Sights or Booster on the market. The bottom rails runs 155 mm to accommodate bipods, laser designators or handgrips.

    To accommodate the different needs for a 7.62 x 51 mm (.308 Win) rifle, B&T offers two versions of the APC308:

    The standard APC308 in a carbine configuration with a 330 mm barrel and the APC308 – DMR with a 480 mm barrel.

    Both versions have a cold-hammer-forged barrel made in Germany. The 1:12 right hand twist rate is to accommodate the widest range of bullet weights. With match grade ammunition the APC308 will produce 1 MOA accuracy.

    The barrel is threaded and is delivered with a B&T designed flash hider. This flash hider provides excellent reduction of muzzle flash and will accept the B&T Rotex-IIA suppressor. The Rotex-IIA is widely used in the world by professional users and the perfect choice for the APC308 for all kind of missions.

    A selector switch in the gas block can be set to “suppressor mode“ in order to provide perfect function when using the suppressor.

    The lower receiver group is a precision machined alloy.

    The adaptable A2-style pistol grip is produced by Magpul and represents the latest in ergonomics and operator comfort. The weapon accepts 7.62 x 51mm MagpulSR25/M110/AR10 magazines. These are available in 10, 20 and 25-round sizes.

    The selector and trigger guard are oversized to accommodate gloved hands.
    The APC308 is the perfect choice when a Police Carbine or DMR rifle with powerful and long range capable cartridge is needed.

    As a member of the APC family it offers training, fighting and cost advantages like no other family of weapons on the market.



    APC308 CARBINE
    Caliber 7.62 x 51 mm
    Opertion Short stroke gas piston
    Magazines 10, 20, 25 rounds
    Barrel Length 330 mm 13″
    Twist Rate 1 in 12“ right hand
    Weight Empty 4600 g with magazine
    Length Open/Closed 875 / 662 mm
    Width Open/Closed 69 / 100 mm
    Height 221 mm

    and the:

    [​IMG]
    APC308 – DMR and Meopta scope. Notice the longer barrel and hand guard.

    APC308 – DMR
    Caliber 7.62 x 51 mm
    Opertion Short stroke gas piston
    Magazines 10, 20, 25 rounds
    Barrel Length 480 mm 19″
    Twist Rate 1 in 12“ right hand
    Weight Empty 5300 g with magazine
    Length Open/Closed 1025 / 813 mm
    Width Open/Closed 69 / 100 mm
    Height 221 mm



    I was not able to find any details about the price.


    http://www.thefirearmblog.com/blog/2018/03/07/bt-apc308-dmr/
     
  2. Path-Finder

    Path-Finder ELITE MEMBER

    Messages:
    10,302
    Joined:
    Feb 7, 2013
    Ratings:
    +1 / 12,050 / -7
    Country:
    Pakistan
    Location:
    United Kingdom
    @Gryphon can you see the CZ in this rifle! That is without doubt what CZ in 7.62x51 will look like!

    [​IMG]
     
    • Thanks Thanks x 2
  3. Starlord

    Starlord SENIOR MEMBER

    Messages:
    7,581
    Joined:
    Sep 25, 2016
    Ratings:
    +2 / 8,248 / -1
    Country:
    Pakistan
    Location:
    Pakistan
    more like Hybrid of CZ and AR ..